Achtung: Your browser is outdated. Please note that Gunfinder may not work properly in some places. You should update your browser as soon as possible. Learn more here!

JP ENTERPRISES JP AR-15 Enhanced Bolt Cam Pin

≈ $35
Price at the dealer: 31.90 €. Converted at the ECB rate as of November 20, 2026.
No permit required (18+)
8700 Leoben, Austria
4
ID: 10095907
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export. How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more
About the seller
Earms
Dealer

Details

Original language
German
Category
Condition
New
Location
🇦🇹 8700 Leoben, Austria
Availability
In stock

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
Source
Earms
Last checked with the dealer
about 23 hours ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
AR-15 5.56 / .223 / .300 BLK Enhanced Bolt Cam Pin

Mil-spec never dies, but it's way past its prime. When it comes to ARs, the smaller the part, the less people think about it. But that doesn't mean there's not room for improvement almost everywhere you look. Both in design and manufacturing, there are always gains to be made.

The JP Enhanced Cam Pin retains every critical Mil-spec dimension of the part but improves on both design and finish. The result is a smoother operating system with less overall wear on the components.

In addition to receiving our low-friction QPQ finish, our Enhanced Cam Pins are also machined thicker than the usual undersized dimension of standard pins. An undersized pin drops right in but allows slop in the relationship between the bolt, bolt carrier and cam pin. Looseness in these parts stresses the cam pin hole in the bolt during cycling, which is why bolt breakage is so common at this point. It also wears the cam pin faster as the carrier wears into the material at the bearing points. A tighter pin with a low-friction coating dramatically reduces all this wear.

Finally, we hold the upper receiver-to-cam pin width precisely to keep the bolt aligned with the barrel. This reduces premature lug wear on the barrel extension.

These cam pins are available individually and are now the JP standard cam pin wherever we use them.

Compatibility: Compatible with all AR-15 Mil-Spec bolts in 5.56 / .223 / .300 BLK

MADE IN THE USA (Show description in original language)
AR-15 5.56 / .223 / .300 BLK Enhanced Bolt Cam Pin Mil-spec never dies, but it's way past its prime. When it comes to ARs, the smaller the part, the less people think about it. But that doesn't mean there's not room for improvement almost everywhere you look. Both in design and manufacturing, there are always gains to be made. The JP Enhanced Cam Pin retains every critical Mil-spec dimension of the part but improves on both design and finish. A smoother operating system with lower overall wear in the components is the result. In addition to receiving our low-friction QPQ finish, our Enhanced Cam Pins are also machined thicker than the usual undersized dimension of standard pins. An undersized pin drops right in but allows slop in the relationship between bolt, bolt carrier and cam pin. Looseness in these parts stresses the cam pin hole of the bolt during cycling, which is why bolt breakage is so common at this point. It also wears the cam pin faster as the carrier wears into the material at the bearing points. A tighter pin with low-friction coating cuts all this wear down dramatically. Finally, we hold the upper receiver-to-cam pin width precisely to keep the bolt in alignment with the barrel. This reduces premature lug wear to the barrel extension. These cam pins are available individually and are now the JP standard cam pin wherever we use them. Compatibility: Compatible for all AR-15 Mil-Spec bolts in 5.56 / .223 / .300 BLK MADE IN THE USA

Similar listings