Achtung: Your browser is outdated. Please note that Gunfinder may not work properly in some places. You should update your browser as soon as possible. Learn more here!

BCM MK2 MCMR10 Complete Upper Receiver 5.56mm Nato 11.5"

≈ $1,977
Price at the dealer: 1,799 €. Converted at the ECB rate as of November 20, 2026.
Purchase permit required
8700 Leoben, Austria
13
ID: 10087370
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export. How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more
About the seller
Earms
Dealer

Details

Original language
German
Category
Purchase eligibility
Required
Condition
New
Location
🇦🇹 8700 Leoben, Austria
Availability
In stock

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
Source
Earms
Last checked with the dealer
about 18 hours ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
MEET THE NEW WAR Upper receivers with built-in carry handles and iron sights have been relegated to history. Optics are now synonymous with forward-deployed combat carbines, featuring modular “optics-ready” flat-top upper receivers. Driven by a sense of urgency to improve lethality and save American lives in real time, this flat-top innovation has inadvertently introduced a degradation in upper receiver rigidity, with the weakest point being the area around the ejection port. Redesigned based on lessons learned in combat since 9/11, the BCM MK2 Upper Receiver is built with up to 30% more rigidity than the current Mil-Spec M4 upper receiver without sacrificing interoperability, for just an additional 1/3 ounce of weight. The MK2 Upper Receiver also retains all USGI components in the assembly and works with all USGI bolt carriers, charging handles, and barrel assemblies. Fine-tuning the positioning of the forward assist creates additional clearance for right-handed charging handle manipulation and for end plate-mounted slings.

Positive effect on target In addition to weapon optics, suppressors have also become standard in modern combat operations. Added gas expansion areas and new channels around the charging handle opening vent gas away from the end user's face, reducing distractions when using the weapon system with a suppressor. Forged from 7075-T6, the BCM MK2 Upper Receivers retain a grain structure that follows the form, maximizing achievable strength. All of these improvements come without affecting the manual of arms used to operate a Mil-Spec upper receiver.

PROFESSIONAL GRADE - LIFE SAVING TOOLS Manufactured by Bravo Company MFG, Inc. (BCM) by professional gunsmiths. These Complete Upper Receivers are designed for shooting professionals and responsible civilians, with Mil-Spec features to meet the demands of their duty. They are fully assembled, headspaced, and test-fired.

SPECIFICATIONS BCM® MK2 UPPER RECEIVER This proprietary design offers enhanced rigidity over the USGI product. The increased rigidity limits barrel deflection, which aids consistency and accuracy. Less flex also reduces premature damage, wear, and failure of bolt lugs due to misalignment. A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above the charging handle latch), to help redirect and vent gas away from the shooter's face.

U.S. Patent Numbers: 10670355, 10677549, D888182

Receiver Machined from Aluminum Forgings 7075-T6 and Hardcoat Anodized per MIL-A-8625F, Type III, Class 2

M4 Feed Ramp Hard Coat Anodized per Mil-A-8625F, Type III, Class 2

T-Marked Upper Receiver The contemporary M16/M4 rifle is built around the concept of modularity. All BCM flat-top uppers feature USGI-type laser-etched T-marks to provide reference points when remounting tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.

BCM® BOLT CARRIER GROUP Chrome-Lined Carrier (Full Auto Profile) Chrome-Lined Gas Key Hardened to USGI Specifications, w/ Staked Grade 8 Fasteners per MIL-SPEC Machined from Mil-Spec Carpenter No. 158® Steel to USGI specifications HPT/MPI (High Pressure Tested/Proof) · (Magnetic Particle Inspected) Shot-Peened Tool Steel Extractor w/ BCM® Extractor Spring Black Extractor Insert Heat-Treated Superfinished Carrier Body Forward Assist Serrations

BCM® BARREL Independently Certified MIL-SPEC 11595E Barrel Steel, Manganese Phosphate Barrel Finish on Entire Barrel 11.5" Government Profile Barrel 1/7 Twist M4 Feed Ramp Extension USGI 5.56mm NATO Chrome-Lined Bore and Chamber Carbine-Length Gas System HPT/MPI (High Pressure Test) (Magnetic Particle Inspected), per MIL-SPEC Muzzle thread: 1/2-28 UNEF

Chrome Bore and Chamber One of the first modifications made to the original M16 in the mid-1960s was the addition of the chrome-lined bore and chamber. It
is now an industry-wide standard for battle rifles. The chrome-lined bore and chamber are harder than the barrel steel and aid chambering, extraction, and reliability. They increase velocity and resist fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less time needed for maintenance and cleaning.

Mil-Spec Barrel Steel (Certified Mil-B-11595E)

BCM barrel steel meets Mil-Spec MIL-B-11595E and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and lasts longer than typical barrels offered on the commercial market. This Mil-Spec grade steel gets its additional strength and rigidity from increased carbon and/or vanadium in the alloy. This offers increased barrel life and performance in all types of extreme environments and temperatures.

Manganese Phosphate Barrel Finish

Barrels are parkerized with a manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface must be phosphate-finished to create a porous surface that absorbs oil and resists corrosion from the elements. BCM barrels are phosphated before the front sights are installed. This is a much more extensive assembly operation, but it ensures that the entire barrel is finished and protected—even under the front sight base.

USGI 1/7 Twist Rate

The USGI 1/7 twist rate of all BCM barrels is the preferred twist rate for most professional infantrymen. This twist rate has proven very versatile and can effectively handle the new, heavier 5.56 ammo that is hugely popular with the military, private security personnel, and for personal defense because of its superior ballistics.

As a note: BCM barrel components are parkerized separately before assembly. Before shipping, all BCM upper receiver groups are test-fired for function, laser bore-sighted with a Mil-Spec carry handle for sight alignment within Mil-Specs, and then batch samples are test-fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.

BCM® GUNFIGHTER MCMR M-LOK Handguard Kit 10"

Featuring the same industry-leading barrel nut and lockup design originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives you modularity in the M-LOK platform. This proprietary, patented mounting system (US Patent 8904691) includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate movement caused by heat generated by the weapon system.

MCMR features:
- M-LOK Compatible mounting system
- Free-float handguard eliminates loads from the barrel, reducing deflection for more accurate shooting
- Precision-machined aerospace 6061-T6 aluminum alloy for high strength and low weight
- Proprietary engineered profile offers additional cross-sectional strength
- Steel barrel nut (same KMR, MCMR, and QRF series) resists movement under heat
- Hard-coat anodized per Mil-A-8625F, Type III, Class 2

INFORMATION

Included BCM Bolt Carrier Group
Included BCM Flash Hider, non-pinned or welded
Included BCM STD Charging Handle
Included BCM 3" M-LOK Picatinny Rail Section
Included BCM GUNFIGHTER QD M-LOK Low-Pro Sling Mount
Including C.I.P. Compatible with AR-15 Lower receiver according to Mil-Spec diameters
AT - Category B
Compatible accessories, see under this article, accessories
MADE IN THE USA (Show description in original language)
MEET THE NEW WAR Upper receivers with baked in carry-handles and iron sights have been relegated to history. Optics are now synonymous with forward deployed combat carbines, featuring modular "optics ready" flat top upper receivers. Driven by a sense of urgency to improve lethality and save American lives in real-time, this flat top innovation has inadvertently introduced a degradation in the rigidity of the upper receiver, with the weakest point being the area around the ejection port. Redesigned by lessons learned in combat since 9/11, the BCM MK2 Upper Receiver is built with up to 30% more rigidity than the current Mil-Spec M4 upper receiver without sacrificing interoperability for a mere additional 1/3 ounce of weight. The MK2 Upper Receiver also retains all USGI components in assembly and works with all USGI bolt carriers, charging handles and barrel assemblies.Fine tuning the positioning of the forward assist creates additional clearance for right hand sided charging handle manipulation and clearance for end plate mounted slings. Positive effect on target In addition to weapon optics, suppressors have also become standard in modern combat operations. Added gas expansion areas and new channels added around the charging handle opening, vent gas away from the end user's face, reducing distractions when employing the weapon system with a can. Forged from 7075-T6, the BCM MK2 Upper Receivers retain a form following grain structure which maximizes achievable strength.All of these improvements come without affecting the manual of arms employed in manipulating a Mil-Spec upper receiver. PROFESSIONAL GRADE - LIFE SAVING TOOLS Manufactured by Bravo Company MFG, Inc. (BCM) by professional gunsmiths These Complete Upper Receiver are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired. SPECIFICATIONS BCM® MK2 UPPER RECEIVER This proprietary design offers enhanced rigidity over the USGI product. The increased rigidity limits barrel deflection which aids in consistency/accuracy. Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment. A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. U.S. Patent Numbers: 10670355, 10677549, D888182 Receiver Machined from Aluminum Forgings 7075-T6 and Hardcoat Anodized per MIL-A-8625F, Type III, Class 2 M4 Feed Ramp Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 T-Marked Upper Receiver The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission. BCM® BOLT CARRIER GROUP Chrome Lined Carrier (Full Auto Profile) Chrome Lined Gas Key Hardened to USGI Specifications, w/ Staked Grade 8 Fasteners per MIL-SPEC Machined from Mil-Spec Carpenter No. 158® Steel to USGI specifications HPT/MPI (High Pressure Tested/Proof) · (Magnetic Particle Inspected) Shot Peened Tool Steel Extractor w/ BCM® Extractor Spring Black Extractor Insert Heat treated Superfinished Carrier Body Forward Assist Serrations BCM® BARREL Independently Certified MIL-SPEC 11595E Barrel Steel, Manganese Phosphate Barrel Finish on Entire Barrel 11.5" Government Profile Barrel 1/7 Twist M4 Feed Ramp Extension USGI 5.56mm NATO Chrome Lined Bore and Chamber Carbine Length Gas System HPT/MPI(High Pressure Test) (Magnetic Particle Inspected), per MIL-SPEC Muzzle thread: 1/2-28 UNEF Chrome Bore and Chamber One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and the chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity and also resists fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time for maintenance and cleaning. Mil-Spec Barrel Steel (Certified Mil-B-11595E) BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures. Manganese Phosphate Barrel Finish Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil to resist corrosion from the elements. BCM barrels are phosphated before the installation of front sights. This is a much more extensive assembly operation but insures that the entire barrel is finished and protected . . .even under the front sight base. USGI 1/7 Twist Rate The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantrymen. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personnel, and personal defense for its' superior ballistics. As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures. BCM® GUNFIGHTER MCMR M-LOK Handguard Kit 10" Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform.This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. MCMR features M-LOK Compatible mounting system Free Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shooting Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight Proprietary engineered profile offers additional cross sectional strength Steel Barrel Nut (same KMR, MCMR, and QRF series), to resist movement under heat Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 INFORMATIONS Included BCM Bolt Carrier Group Included BCM Flash Hider, non pinned or welded Included BCM STD Charging Handle Included BCM 3" M-LOK Picatinny Rail Section Included BCM GUNFIGHTER QD M-LOK Low-Pro Sling Mount Including C.I.P. Compatible with AR-15 Lower receiver according to Mil-Spec diameters AT - Category B Compatible accessories, see under this article, accessories MADE IN THE USA

Similar listings