Achtung: Your browser is outdated. Please note that Gunfinder may not work properly in some places. You should update your browser as soon as possible. Learn more here!

Fabarm – ELOS B2 AL – Barrel 71 – Cal. 410

Price on Request
Purchase permit required
31029 Vittorio Veneto, Italy
5
ID: 10010292
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export. How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more

Details

Original language
Italian
Brand
Fabarm
Product
Fabarm ELOS B2
Category
Purchase eligibility
Required
Condition
New
Location
🇮🇹 31029 Vittorio Veneto, Italy
Availability
In stock

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
Source
Armeria CentroSport
Last checked with the dealer
about 13 hours ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
ELOS B2 AL 410

Cal. 36-76 shotgun with 71 cm barrel and interchangeable ENNER HP chokes included, selective single trigger

A well-balanced shotgun with an 8-8 rib, soft recoil thanks to the Tribore HP overbored barrels, and weighing approximately 2.7 kg

Below you’ll find all of Fabarm’s exclusive features

Tribore HP Barrel

STEEL SHOT CARTRIDGES: FABARM LEADS THE WAY!

EXCLUSIVE: “HIGH PERFORMANCES” STEEL SHOT CARTRIDGES CAN BE FIRED WITH INNER HP AND EXIS HP CHOKES TIGHTER THAN MODIFIED (3 STARS), AND ALSO WITH LONG 0.7 (2 STARS) AND XTREME 0.9 (1 STAR) CHOKES! NO COMPETITOR OFFERS THE SAME ADVANTAGES! Today, all firearm manufacturers, as FABARM did in the past, allow the use of steel shot cartridges with chokes from CIL to MODIFIED (3 stars). For all other chokes, they state “do not use with steel shot.” This restriction is based on a C.I.P. guideline that limits the use of steel ammunition to chokes with a maximum conical constriction of 1 degree.

In the design of this choke (50 mm long, while others may be 65 mm long with identical sections), the constriction is achieved with a 40 mm cone and a 10 mm cylindrical section to stabilize the shot before it exits the barrel. In the case of a MODIFIED choke (***, 3 stars) with a 0.5 mm reduction compared with the barrel bore, the cone section has an approximate angle of 1 degree. For this reason, the C.I.P. specifies MODIFIED (3 stars) as the limit choke for using steel shot ammunition.

FABARM is now the only manufacturer that allows hunters and shooters to use ammunition loaded with “high performances” steel shot with 2-star chokes (INNER HP or EXIS HP LONG 0.7) and 1-star chokes (INNER HP or EXIS HP XTREME 0.9).

HOW IS THIS POSSIBLE?

1- BY INCREASING THE CHOKE LENGTH:

• INNER HP™ 12 Ga: 82 mm (3.23 “)

• INNER HP™ 20 Ga: 82 mm (3.23”)

• EXIS HP™ 12 Ga: 92 mm (3.62”)

2- BY REPLACING THE CURRENT CONICAL SECTION WITH A HYPERBOLIC PROFILE SECTION

(No sharp edges, less friction and greater gradualness).

COMMENTS:

A

The ability to use chokes tighter than MODIFIED (3 stars) is a significant advantage. Where competitors’ barrels with a 3-star choke produce a pattern with 76% distribution, the TRIBORE HP barrel with the XTREME 0.9 choke (1 star) has 89% distribution on target!

With the FABARM XTREME 0.9 choke, there are 40 more pellets on target! = + 15% pellets

B

These results are achieved not only thanks to the revolutionary chokes, but also thanks to the (patented) TRIBORE barrel.

The TRIBORE barrel is the only one without the typical drawback of overbored barrels: minimal penetration! Overbored barrels are designed to produce a wider shot distribution. The innovation was to increase the bore diameter to reduce friction and, consequently, the number of deformed pellets. It was developed for shooting disciplines (sporting and trap), where penetration was not the main objective… the objective was a better distribution to hit more targets.

Obviously, with traditional overbored barrels, penetration is lacking: the gases are compressed in a larger volume (the bore diameter is increased from 18.4 to 18.85 mm), resulting in lower pressure and lower pellet velocity… and therefore REDUCED PENETRATION (Ec = ½ mv2).

SO WHAT ARE THE FEATURES OF THE TRIBORE BARREL?

The TRIBORE barrel, developed 10 years ago by FABARM (the TRIBORE HP barrel introduced in 2005 is an evolved version of the TRIBORE), following the introduction of overbored barrels that achieved success in Sporting and Trap, is the practical application of the VENTURI principle, according to which reducing the diameter of a tube with a fluid moving inside it (gas, water and
tc… ) automatically increases its flow speed.

For example, when we wash our car, we usually press the water hose between our thumb and index finger, and the water pressure increases on its own!

The TRIBORE barrel works on the same principle. The long tapered section (205 mm – 8.07") gradually reduces the bore from 18.70 to 18.40 mm, automatically increasing the shot velocity and, consequently, penetration. No other barrel delivers the same performance!

IN 3 WORDS, THE TRIBORE HP BARREL HAS:

An overbored section to reduce friction and recoil (18.70 mm diameter).

A long tapered section (205 mm) that reduces the bore diameter and increases shot velocity.

The new, revolutionary chokes with the HYPERBOLIC PROFILE.

C

Deep-drilling technology:

All our competitors produce their tubes using cold hammer forging to keep costs down. This process, which is perfect for rifled bores, has many drawbacks for smoothbore barrels: the steel is too rigid, creating high stress inside the material… so during welding (at around 730º C), these internal stresses deform the material.

These stresses are so high that some competitors cryogenically freeze their tubes to reduce them… but the results are more marketing than substance…

There is a perfect solution for producing the best tubes: drilling solid chrome-molybdenum steel bars.

Because this technology is expensive, our two biggest competitors use it only for their top-of-the-line shotguns. To give its customers better barrels, FABARM uses deep-drilling technology exclusively to produce all the tubes for its shotguns. (Show description in original language)
ELOS B2 AL 410

Fucile cal.36-76 canna 71cm con strozzatori intercambiabili ENNER HP 5 in dotazione monogrillo selettivo

un fucile ben bilaciato con bindella 8-8 morbido al rinculo avendo le canne tribore HP overbored con un peso circa 2,7kg

di seguito troverete tutte le caratteristiche esclusive di fabarm

Tribore HP Barrel

CARTUCCE CON PALLINI IN ACCIAIO: FABARM INDICA LA STRADA!

ESCLUSIVO: CARTUCCE CON PALLINI IN ACCIAIO “HIGH PERFORMANCES” POSSONO ESSERE SPARATE CON GLI STROZZATORI INNER HP E EXIS HP SUPERIORI AL MODIFIED (3 STELLE) , ED ANCHE CON GLI STROZZATORI LONG 0,7 (2 STELLE) ED XTREME 0,9 (1 STELLA)! NESSUN CONCORRENTE GARANTISCE GLI STESSI VANTAGGI! Oggigiorno tutti i produttori di armi, come FABARM in passato, consentono l’uso di cartucce con pallini in acciaio con strozzatori dal CIL al MODIFIED (3 stelle). Per tutti gli ì altri strozzatori indicano “non usare con pallini in acciaio”. Questa restrizione è basata su indicazione della C.I.P. che limita l’uso di munizioni in acciaio con una strozzatura conica di massimo 1 grado.

Nel disegno di questo strozzatore (lungo 50 mm, mentre altri possono essere lunghi 65mm con sezioni identiche) la strozzatura è ottenuta con un cono di 40mm e 10mm di area cilindrica per stabilizzare i pallini prima della loro uscita dalla canna. Nel caso di uno strozzatore MODIFIED (***, 3 stelle) con una riduzione rispetto all’anima della canna di 0,5 mm, la sezione del cono avrà un angolo approssimativo di 1 grado. Per questa ragione la C.I.P. indica il MODIFIED (3 stelle) come strozzatore limite per l’uso di munizioni con pallini in acciaio.

FABARM è oggi l’unico produttore che dà la possibilità a cacciatori e tiratori di usare munizioni caricate con pallini acciaio “high performances” con gli strozzatori 2 stelle (INNER HP o EXIS HP LONG 0,7) e una stella (INNER HP o EXIS HP XTREME 0,9).

COME E’ POSSIBILE?

1- INCREMENTANDO LA LUNGHEZZA DELLO STROZZATORE:

• INNER HP™ 12 Ga: 82 mm (3,23 “)

• INNER HP™ 20 Ga: 82 mm (3,23”)

• EXIS HP™ 12 Ga: 92 mm (3,62”)

2- SOSTITUENDO L’ATTUALE SEZIONE CONICA CON UNA SEZIONE A PROFILO IPERBOLICO

(Nessun spigolo, meno attrito e maggiore progressività).

COMMENTI:

A

La possibilità di usare strozzatori superiori al MODIFIED (3 stelle) è un notevole vantaggio. Dove i concorrenti con una canna con strozzatura 3 stelle hanno una rosata con una distribuzione del 76% la canna TRIBORE HP con lo strozzatore XTREME 0,9 (1 stella) ha una distribuzione nel bersaglio del 89%!

Con lo strozzatore FABARM XTREME 0,9 ci sono 40 pallini in più nel bersaglio! = + 15% di pallini

B

Questi risultati sono ottenuti non solo grazie agli strozzatori rivoluzionari ma anche grazie alla canna TRIBORE ( brevettata ).

La canna TRIBORE è l’unica priva dello svantaggio tipico delle canne sovralesate (overbored); una minima penetrazione! Le canne overbored ricercano una maggiore distribuzione dei pallini. L’innovazione è stata incrementare il diametro dell’anima per ridurre l’attrito e conseguentemente il numero dei pallini deformati. E’ stata sviluppata per le discipline di tiro ( sporting e trap ) dove la penetrazione non era l’obiettivo principale…l’obiettivo era una migliore distribuzione per colpire un numero maggiore di piattelli.

Ovviamente con le canne over-bored tradizionali, c’è una carenza di penetrazione: i gas sono compressi in un volume maggiore, ( il diametro dell’anima è aumentato da 18,4 a 18,85 mm ), quindi una pressione minore, una minore velocità dei pallini ..e quindi una RIDOTTA PENETRAZIONE ( Ec= ½ mv2 ).

QUINDI QUALI SONO LE CARATTERISTICHE DELLA CANNA TRIBORE?

La canna TRIBORE sviluppata 10 anni fa da FABARM ( la canna TRIBORE HP introdotta nel 2005 è una versione evoluta della TRIBORE ), in seguito all’introduzione delle canne overbored che ottenevano successi nello Sporting e nel Trap, è la concreta applicazione del principio di VENTURI secondo cui la riduzione del diametro di un tubo con un fluido in movimento all’interno ( gas, acqua etc… ) automaticamente ne aumenta la velocità di scorrimento.

Esempio: quando laviamo la nostra automobile siamo soliti premere il tubo dell’acqua tra il pollice e l’indice, la pressione dell’acqua aumenta da sola!

E’ la stessa logica della canna TRIBORE. La lunga sezione conica ( 205 mm – 8,07 “ ) che lentamente riduce l’anima da 18,70 a 18,40 mm automaticamente incrementerà la velocità dei pallini, e di conseguenza la penetrazione. Nessuna altra canna ha le stesse performances!

IN 3 PAROLE LA CANNA TRIBORE HP HA:

Una area sovra alesata per ridurre l’attrito e il rinculo ( diametro 18,70 mm ).

Una lunga area conica ( 205 mm ) che riduce il diametro dell’anima e aumenta la velocità dei pallini.

I nuovi e rivoluzionari strozzatori con il PROFILO IPERBOLICO.

C

Tecnologia della foratura profonda:

Tutti i nostri concorrenti producono i tubi utilizzando la tecnologia della martellatura a freddo per contenere i costi. Questo processo, perfetto per l’anima rigata, ha molti svantaggi per le canne ad anima liscia: l’acciaio è troppo rigido e si crea un elevato stress all’interno del materiale… quindi durante le operazioni di saldatura (a circa 730º C) queste tensioni interne deformano il materiale.

Queste tensioni sono così elevate che alcuni concorrenti congelano criogenicamente i tubi in modo da ridurre le tensioni …ma i risultati sono più di marketing che concreti…

Esiste una soluzione perfetta per produrre i tubi migliori: forare barre piene di acciaio al cromo molibdeno.

A causa dei costi elevati di questa tecnologia, i nostri due maggiori concorrenti la utilizzano solo per i loro fucili di altissimo livello. Per dare canne migliori ai suoi clienti, FABARM utilizza solo la tecnologia della foratura dal pieno per produrre tutti i tubi dei suoi fucili.

Similar listings