RADIAN WEAPONS GLOCK® 19 / 19X / 45 / 47 / 49 GEN1-5 COMPRESSOR™ Quick-Tune Guide Rod Kit

135.90 €

Purchase permit required

8700 Leoben, Austria

ID: 10094086

This item is currently unavailable.

Shop safely with Gunfinder

Our AI-powered seller identity verification makes Gunfinder the safest marketplace online. Learn more

About the seller

Earms

Dealer

3,748 listings

Details

Original language

German

Brand

Glock

Product

Glock 19

Category

Purchase eligibility

Required - What am I allowed to buy?

Condition

New

Location

🇦🇹 8700 Leoben, Austria

Availability

Out of stock

Freshness

This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.

Source: Earms
Last updated: about 12 hours ago

Description

Note: The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.

Most adjustable guide rods on the market use a cap screw to retain the spring. The problem? Loose screws are too common and thread locker forces you to commit to one spring weight.Enter the screwless design of the COMPRESSOR Quick-Tune Guide Rod. The dovetail interface is captured by the spring, creating a simple and secure lock-up. Flutes along the guide rod allow the spring to move with less friction for smoother cycling. The heat treated guide rod has a slick, durable, and corrosion-resistant Nitride finish. Included: 1 - Hardened 17-4 SS Guide Rod 3 - Flat wire Springs in 13lb, 15lb, and 18 lb weights 1 - SS Washer for Gen3 1 – SS Captive bushing for Gen4 & Gen5 compatibility Specs: Compatible with GLOCK® 19 / 19X / 45 / 47 / 49 GEN1-5 models NOT compatible with other models INSTALLATION INSTRUCTIONS STEP 1 | Compress installed spring and insert tool* into the cross hole to hold the spring down. STEP 2 | Remove the dovetailed end cap. Then remove the tool from the cross hole, allowing the spring to be removed. STEP 3 | Install a different spring weight, compress new spring, and insert the tool back into the cross hole again. STEP 4 | Align dovetail to install cap, remove the tool, and allow spring to capture around the dovetail interface. While a tool is not necessary for the Radian guide rod, it can assist in holding the spring down when removing and installing the cap. MADE IN THE USA