Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
The Heck-Pack Dressing Gallows Diana with quick release is designed to dress game directly hanging in the field. Hung head down, the valuable parts of the game meat remain protected from contamination. Lying on the ground, this is hardly possible cleanly, especially with soft hits or heavy pieces. As a complete set with quick release, the Diana works entirely without a rear carrier and hooks onto the trailer hitch. It can also be retrofitted to a rear carrier or inserted into a permanently concrete-mounted holder at the home dressing station. The three-part gallows can be assembled without tools and is set up in under a minute, with disassembly just as fast. The weight of the game rests on a support on the ground, not on the trailer hitch. On soft ground, the tube penetrates the ground up to a stop, additionally stiffening the structure against twisting. The gallows is made of hot-dip galvanized ST37 steel from Thyssen-Krupp, reinforced with a second, larger tube at the most stressed points. Because it can be disassembled into three parts, each component remains manageable and weighs only a few kilograms. The longest single part fits into most trunks or on the back seat. Dressing gallows with quick release for mounting on car trailer hitches quick, tool-free assembly and disassembly three-part, disassemblable combinable with Heck-Pack game trays made of hot-dip galvanized ST37 steel strap winch for lifting the load operable by one person designed for game up to 90 kg highest hanging point approx. 240 cm above the ground longest component 110 cm long load-bearing tube in the format 30 x 30 x 3 mm reinforced with tube 40 x 40 x 4 mm at load-bearing points made in Germany total weight approx. 24 kg including all attachments
(Show description in original language)
Der Heck-Pack Aufbrechgalgen Diana mit Schnellverschluss dient dazu, erlegtes Wild direkt im Revier hängend aufzubrechen. Mit dem Haupt nach unten aufgehängt, bleiben die wertvollen Teile des Wildbrets vor Verunreinigung geschützt. Am Boden liegend gelingt das sauber kaum, vor allem bei weichen Treffern oder schweren Stücken. Als Komplettset mit Schnellverschluss kommt der Diana ganz ohne Heckträger aus und wird an der Anhängerkupplung eingehängt. Ebenso lässt er sich an einem Heckträger nachrüsten oder in eine fest einbetonierte Halterung am heimischen Aufbrechplatz stecken. Der dreiteilige Galgen lässt sich werkzeuglos zusammenstecken und ist in unter einer Minute aufgebaut, ebenso schnell geht der Abbau. Die Last des Wilds ruht dabei auf einer Abstützung am Boden und nicht auf der Anhängerkupplung. Auf weichem Untergrund dringt das Rohr bis zu einem Anschlag in den Boden ein und versteift den Aufbau so zusätzlich gegen Verwinden. Gebaut ist der Galgen aus feuerverzinktem ST37-Stahl von Thyssen-Krupp, an den am stärksten beanspruchten Stellen mit einem zweiten, größeren Rohr verstärkt. Weil er sich in drei Teile zerlegen lässt, bleibt jede Komponente handlich und wiegt nur wenige Kilogramm. Das längste Einzelteil passt in die meisten Kofferräume oder auf die Rücksitzbank. Aufbrechgalgen mit Schnellverschluss zur Montage auf Pkw-Anhängerkupplungen schneller werkzeugloser Auf- und Abbau dreiteilig zerlegbar kombinierbar mit den Heck-Pack Wildwannen aus feuerverzinktem ST37-Stahl Gurtwinde zum Hochziehen der Last bedienbar von einer Person ausgelegt für Wild bis 90 kg höchster Aufhängepunkt ca. 240 cm über dem Boden längstes Bauteil 110 cm lang tragendes Rohr im Format 30 x 30 x 3 mm an tragenden Stellen verstärkt mit Rohr 40 x 40 x 4 mm hergestellt in Deutschland Gesamtgewicht ca. 24 kg inkl. aller Anbauteile