I can translate the visible German text while preserving the HTML/CSS exactly.
en,
you value left- or right-handed operation and a closed collection system for spent primers.
Not the best fit if …
you’re primarily looking for maximum production speed rather than process control,
your case rim is outside 8.71–10.72 mm or 11.89–14.27 mm and you don’t plan to use a compatible add-on system,
you want to keep using standard lock rings without checking compatibility or can only mount the press on a flexible tabletop.
Buying checklist: die, case rim, and mounting
Die mount: The press is designed for standard 7/8″-14 reloading dies. Two Forster Cross Bolt Die Lock Rings are included; their geometry ensures the intended fit and lateral clearance in the T-slot.
S-jaws: The small ends accommodate case rims from .343–.422″, and the large ends .468–.562″. Measure the actual rim diameter rather than relying on a caliber list alone.
Outside the range: LS jaws or an adapter plate and third-party shell holders can only be used with a compatible combination and are not included.
Mounting: Forster specifies four 1/4″ holes. Mount the press on a rigid, torsion-resistant workbench; alternatively, the manual describes a stable mounting plate secured with C-clamps.
What the Co-Ax principle offers in practice
Floating die: The die slides into the T-slot and can align itself within the intended clearance.
Self-centering jaws: The S-jaws grip the case rim on both sides, allowing the case and die to align together.
Two guide rods: The press head runs on two parallel rods instead of a central ram, keeping the work area easily accessible.
Ambidextrous operation: The handle can be mounted for left- or right-handed use.
Primer management: Spent primers are routed out of the work area through a tube into a collection cup; small and large priming assemblies are included.
Limitations and common buying mistakes
The B5 does not replace dies, load data, or a caliber-specific suitability check.
A lock ring that is too thick or differently shaped can prevent the intended die changes and floating alignment.
Keep the primer tube clean. User reports mention occasional blockages with large spent primers, so check the collection path regularly.
Some users prefer to seat primers with a separate hand or bench tool. The integrated system is an option, not a requirement for every workflow.
The net weight is not consistently documented. Shipping weight and package dimensions are therefore deliberately not listed as product specifications.
Tips for users and instructors
Mount the press plumb and without flex, and fully check the handle travel and hand clearance.
Measure the case rim, choose the correct side of the S-jaws, and check the spring position of the jaws before the first operation.
Install the die with a compatible Cross-Bolt Lock Ring; adjust the detent pin only enough to hold the die while still allowing it to float.
Test the first operation dry, without a primer, powder, or bullet. Stop immediately if you encounter unusual resistance and identify the cause.
After each batch, check the jaws, guide rods, and primer channel; lightly oil moving and bare parts as directed by the manufacturer, and cover the press.
Comparison: B5 or progressive press?
Co-Ax B5: a good choice for controlled single operations, quick die changes, and a self-centering case holder. A progressive press is a better choice when high output and multiple linked stations are the main goal. The B5 doesn’t win on speed, but on visibility, accessibility, and a reproducible
erable single-stage process.
Suitable store categories and workshop add-ons
Reloading accessories: free tools, measuring and organizing accessories
Cleaning & workshop for shooting sports
Shooting sports & range
Fix It Sticks 16-Bit Set with T-Handle for general workshop tasks
Technical specifications
Model: Co-Ax Reloading Press with S Jaws, Model B5
Product type: single-stage reloading press
Die mount: 7/8″-14
S jaws, small ends: .343–.422″ or 8.71–10.72 mm case rim diameter
S jaws, large ends: .468–.562″ or 11.89–14.27 mm case rim diameter
Mounting: four 1/4″ holes; rigid workbench or sturdy mounting plate
Priming: small and large priming units included
Collection system: tube and cup for spent primers
Operation: handle can be mounted on the left or right
Color/finish: red press frame with black and bare functional parts
Origin: USA
Product weight: not reliably published; shipping data is not used as net weight
Confirmed contents
assembled FORSTER Co-Ax B5 press with S jaws
handle tube and grip
primer collection tube and cup
small and large priming units
two aluminum Cross Bolt Die Lock Rings
1/8″, 5/32″ and 7/64″ hex keys
small parts pack and loose mounting components as specified in the manufacturer's instructions
Not confirmed or not included: reloading dies, LS jaws, adapter plate, standard shellholder, workbench fasteners, powder, primers, cases, bullets or ammunition.
FAQ
Which dies fit the Co-Ax B5? It's designed for standard reloading dies with 7/8″-14 threads. For a proper fit and the desired floating alignment, use compatible Forster Cross Bolt Die Lock Rings; two are included.
Do I need a shellholder for each caliber? Within the published case rim diameter ranges, the S jaws work without a traditional caliber-specific standard shellholder. Outside these ranges, LS jaws or an adapter solution may be needed; check compatibility with the specific cartridge.
What case rim sizes do the S jaws cover? The small ends cover .343–.422″ or 8.71–10.72 mm, and the large ends cover .468–.562″ or 11.89–14.27 mm. The actual rim diameter is what matters.
Can left- and right-handed users operate the press? Yes. According to the manufacturer, the handle can be mounted for left- or right-handed operation. Check clearance and a secure grip position at your own workstation.
Is a priming system included? Yes. Small and large priming units are confirmed. If you prefer to prime separately, you can still use a separate hand or bench tool for that step.
Is the Co-Ax B5 faster than a progressive press? No, not in terms of maximum output. The B5 is a single-stage press that prioritizes visibility, quick die changes and controlled single-stage processes.
How do I mount and maintain the press safely? Forster specifies four 1/4″ mounting holes. Mount it on a rigid surface, wear safety glasses during operation, keep your hands away from pinch points, and lightly oil moving or bare parts as directed.
Black-Raptor summary
The Co-Ax B5 is a good choice if a precise workflow and controlled die changes matter more than maximum production. Measure the case rim, plan for compatible Cross Bolt Lock Rings, and give the press a truly rigid base—then the Co-Ax design can show what it does best.
(Show description in original language)
.br-v3-product{--br-green:#18392f;--br-gold:#e8d39a;--br-cream:#f7f4ec;--br-red:#8b2c2c;--br-text:#1b1f1d;color:var(--br-text);font-size:16px;line-height:1.55;max-width:100%;overflow-wrap:anywhere}
.br-v3-product *{box-sizing:border-box}
.br-v3-product a{color:#174d3d;text-decoration:underline;text-underline-offset:2px}
.br-v3-product a:focus-visible,.br-v3-product summary:focus-visible{outline:3px solid #9f6c00;outline-offset:3px}
.br-v3-product .br-hero,.br-v3-product .br-card,.br-v3-product .br-tip,.br-v3-product .br-compare,.br-v3-product .br-note,.br-v3-product .br-final{padding:22px;margin:20px 0;border-radius:6px}
.br-v3-product .br-hero{background:var(--br-green);color:#fff}
.br-v3-product .br-hero p,.br-v3-product .br-hero strong,.br-v3-product .br-hero li{color:#fff}
.br-v3-product .br-eyebrow{font-size:.82rem;font-weight:800;letter-spacing:.08em;text-transform:uppercase;color:var(--br-gold);margin:0 0 8px}
.br-v3-product .br-title{font-size:1.55rem;line-height:1.2;font-weight:800;margin:0 0 10px}
.br-v3-product .br-section-title{font-size:1.25rem;line-height:1.25;font-weight:800;margin:30px 0 12px;color:var(--br-green)}
.br-v3-product .br-card{background:var(--br-cream);border-left:5px solid var(--br-gold);color:#1b1f1d}
.br-v3-product .br-tip{background:#edf4f0;border-left:5px solid var(--br-green);color:#1b1f1d}
.br-v3-product .br-compare{background:#f1f1f1;border-left:5px solid #555;color:#1b1f1d}
.br-v3-product .br-note{background:#fff2f2;border-left:5px solid var(--br-red);color:#1b1f1d}
.br-v3-product .br-card p,.br-v3-product .br-card li,.br-v3-product .br-card strong,.br-v3-product .br-tip p,.br-v3-product .br-tip strong,.br-v3-product .br-compare p,.br-v3-product .br-compare strong,.br-v3-product .br-note p,.br-v3-product .br-note strong{color:#1b1f1d}
.br-v3-product .br-final{background:var(--br-green);color:#fff}
.br-v3-product .br-final p,.br-v3-product .br-final strong,.br-v3-product .br-final li{color:#fff}
.br-v3-product .br-final a{color:#fff}
.br-v3-product ul,.br-v3-product ol{padding-left:1.25rem}
.br-v3-product li{margin:.42rem 0}
.br-v3-product details{background:#f2f2f2;color:#1b1f1d;padding:12px 14px;margin:10px 0;border-radius:5px}
.br-v3-product details p,.br-v3-product details strong{color:#1b1f1d}
.br-v3-product summary{cursor:pointer;font-weight:750;color:#153d32}
.br-v3-product details p{margin:10px 0 2px}
@media (max-width:720px){.br-v3-product{font-size:16px;line-height:1.5}.br-v3-product .br-hero,.br-v3-product .br-card,.br-v3-product .br-tip,.br-v3-product .br-compare,.br-v3-product .br-note,.br-v3-product .br-final{padding:17px;margin:16px 0}.br-v3-product .br-title{font-size:1.3rem}.br-v3-product .br-section-title{font-size:1.15rem}}
Einstationenpresse · 7/8″-14 · S-Backen
FORSTER Co-Ax B5: kontrollierte Einzelstation mit schwimmender Ausrichtung
Die Co-Ax B5 verbindet schnell wechselbare Standardmatrizen mit selbstzentrierenden S-Backen, zwei schwimmenden Führungsstangen und einem integrierten Zündhütchensetzsystem. Vor dem Kauf sind drei Punkte entscheidend: Hülsenrandmaß, Forster-Cross-Bolt-Lockring und eine ausreichend steife Werkbankmontage.
Unsere ehrliche Einordnung
Die B5 ist eine starke Werkstattpresse für Wiederlader, die einzelne Arbeitsschritte bewusst kontrollieren, Matrizen häufig wechseln und Hülse sowie Matrize ohne starren Standard-Shellholder zueinander ausrichten möchten. Sie ist keine progressive Hochleistungspresse: Wer maximale Stückzahl pro Stunde sucht, wird mit einem Mehrstationensystem besser bedient. Wer dagegen nachvollziehbare Einzelprozesse, saubere Zugänglichkeit und wiederholbare Einstellungen priorisiert, erhält ein reifes Co-Ax-System.
Passt gut, wenn … / Passt eher nicht, wenn …
Passt gut, wenn …
du 7/8″-14-Matrizen mit passenden Cross-Bolt-Lockringen kontrolliert auf einer Einzelstation einsetzen möchtest,
deine Hülsenränder in einen der beiden veröffentlichten Bereiche der S-Backen fallen,
du Links- oder Rechtshandbedienung und ein geschlossenes Auffangsystem für verbrauchte Zündhütchen schätzt.
Passt eher nicht, wenn …
du primär maximale Serienleistung statt Prozesskontrolle suchst,
dein Hülsenrand außerhalb von 8,71–10,72 mm oder 11,89–14,27 mm liegt und du kein passendes Zusatzsystem einplanen willst,
du Standard-Lockringe ungeprüft weiterverwenden oder die Presse nur auf einer flexiblen Tischplatte befestigen kannst.
Kaufcheck: Matrize, Hülsenrand und Montage
Matrizenaufnahme: Die Presse ist für übliche 7/8″-14-Wiederladematrizen ausgelegt. Zwei Forster Cross Bolt Die Lock Rings liegen bei; deren Geometrie stellt den vorgesehenen Sitz und das seitliche Spiel im T-Schlitz sicher.
S-Backen: Die kleinen Enden decken Hülsenränder von .343–.422″ ab, die großen Enden .468–.562″. Miss den tatsächlichen Randdurchmesser und verlasse dich nicht allein auf eine Kaliberliste.
Außerhalb des Bereichs: LS-Backen beziehungsweise Adapterplatte und Drittanbieter-Shellholder sind nur bei passender Kombination nutzbar und nicht Teil dieses Lieferumfangs.
Befestigung: Forster sieht vier 1/4″-Bohrungen vor. Die Presse gehört auf eine verwindungssteife Werkbank; alternativ beschreibt die Anleitung eine stabile Montageplatte mit C-Klemmen.
Was das Co-Ax-Prinzip praktisch bringt
Schwimmende Matrize: Die Matrize wird in den T-Schlitz eingeschoben und kann sich innerhalb des vorgesehenen Spiels ausrichten.
Selbstzentrierende Backen: Die S-Backen greifen den Hülsenrand beidseitig und lassen Hülse und Matrize gemeinsam fluchten.
Zwei Führungsstangen: Der Pressenkopf läuft auf zwei parallelen Stangen statt auf einem mittigen Stempel; der Arbeitsbereich bleibt gut zugänglich.
Beidhändige Bedienung: Der Hebel lässt sich für Links- oder Rechtshandbetrieb montieren.
Zündhütchenmanagement: Verbrauchte Zündhütchen werden über Rohr und Auffangbecher aus dem Arbeitsbereich geführt; kleine und große Setzeinheiten sind enthalten.
Grenzen und typische Fehlkäufe
Die B5 ersetzt keine Matrizen, keine Laborierungsdaten und keine kaliberspezifische Eignungsprüfung.
Ein zu dicker oder anders geformter Lockring kann den vorgesehenen Matrizenwechsel und die schwimmende Ausrichtung verhindern.
Das Zündhütchenrohr muss sauber gehalten werden. Erfahrungsberichte nennen bei großen verbrauchten Zündhütchen gelegentliche Blockaden; deshalb Auffangweg regelmäßig kontrollieren.
Ein Teil der Nutzer setzt Zündhütchen lieber mit einem separaten Hand- oder Bankgerät. Das integrierte System ist ein Funktionsangebot, kein Muss für jeden Arbeitsablauf.
Das Nettogewicht ist nicht widerspruchsfrei belegt. Versandgewicht und Paketmaße werden deshalb bewusst nicht als Produktdaten ausgegeben.
Anwender- und Ausbildertipps
Presse lotrecht und verwindungsfrei montieren, Hebelweg sowie Handfreiheit vollständig prüfen.
Hülsenrand messen, passende Seite der S-Backen wählen und die Federlage der Backen vor dem ersten Arbeitsgang kontrollieren.
Matrize mit passendem Cross-Bolt-Lockring einsetzen; den Raststift nur so einstellen, dass die Matrize gehalten wird und weiterhin schwimmen kann.
Ersten Arbeitsschritt ohne Zündhütchen, Pulver oder Geschoss trocken prüfen. Bei ungewöhnlichem Widerstand sofort stoppen und Ursache klären.
Nach jeder Charge Backen, Führungsstangen und Zündhütchenkanal kontrollieren; bewegte und blanke Teile nach Herstellerhinweis leicht ölen und die Presse abdecken.
Vergleich: B5 oder progressive Presse?
Co-Ax B5: sinnvoll für kontrollierte Einzeloperationen, schnellen Matrizenwechsel und eine selbstzentrierende Hülsenaufnahme. Progressive Presse: sinnvoller, wenn hohe Ausstoßleistung und mehrere gekoppelte Stationen das Hauptziel sind. Die B5 gewinnt nicht über Tempo, sondern über Übersicht, Zugänglichkeit und einen reproduzierbaren Einzelprozess.
Passende Shopbereiche und Werkstatt-Ergänzung
Wiederladezubehör: freie Tools, Mess- und Organisationszubehör
Reinigung & Werkstatt für den Schießsport
Schießsport & Range
Fix It Sticks 16-Bit-Set mit T-Griff für allgemeine Werkstattaufgaben
Technische Praxisdaten
Modell: Co-Ax Reloading Press with S Jaws, Model B5
Produktart: Einstationen-Wiederladepresse
Matrizenaufnahme: 7/8″-14
S-Backen, kleine Enden: .343–.422″ beziehungsweise 8,71–10,72 mm Hülsenranddurchmesser
S-Backen, große Enden: .468–.562″ beziehungsweise 11,89–14,27 mm Hülsenranddurchmesser
Montage: vier 1/4″-Bohrungen; steife Werkbank oder stabile Montageplatte
Zündhütchensetzen: kleine und große Setzeinheit enthalten
Auffangsystem: Rohr und Becher für verbrauchte Zündhütchen
Bedienung: Hebel links oder rechts montierbar
Farbe/Oberfläche: roter Pressenrahmen mit schwarzen und blanken Funktionsteilen
Herkunft: USA
Produktgewicht: nicht belastbar veröffentlicht; Versanddaten werden nicht als Nettogewicht übernommen
Bestätigter Lieferumfang
montierte FORSTER Co-Ax B5 Presse mit S-Backen
Hebelrohr und Handgriff
Zündhütchen-Auffangrohr und Auffangbecher
kleine und große Zündhütchensetzeinheit
zwei Aluminium Cross Bolt Die Lock Rings
Innensechskantschlüssel 1/8″, 5/32″ und 7/64″
Kleinteilepaket und lose Montagekomponenten gemäß Herstelleranleitung
Nicht bestätigt beziehungsweise nicht enthalten: Wiederladematrizen, LS-Backen, Adapterplatte, Standard-Shellholder, Werkbankbefestigung, Pulver, Zündhütchen, Hülsen, Geschosse oder Munition.
FAQ
Welche Matrizen passen in die Co-Ax B5? Vorgesehen sind Standard-Wiederladematrizen mit 7/8″-14-Gewinde. Für den richtigen Sitz und die gewünschte schwimmende Ausrichtung sollten passende Forster Cross Bolt Die Lock Rings verwendet werden; zwei sind enthalten.
Brauche ich für jedes Kaliber einen Shellholder? Innerhalb der veröffentlichten Hülsenrandbereiche arbeiten die S-Backen ohne klassischen kaliberspezifischen Standard-Shellholder. Außerhalb dieser Bereiche können LS-Backen oder eine Adapterlösung nötig sein; das muss für die konkrete Patrone geprüft werden.
Welche Hülsenrandgrößen decken die S-Backen ab? Die kleinen Enden decken .343–.422″ beziehungsweise 8,71–10,72 mm ab, die großen Enden .468–.562″ beziehungsweise 11,89–14,27 mm. Maßgeblich ist der tatsächliche Randdurchmesser.
Kann die Presse von Links- und Rechtshändern genutzt werden? Ja. Der Bedienhebel kann laut Hersteller für Links- oder Rechtshandbetrieb montiert werden. Freiraum und sichere Griffposition müssen am eigenen Arbeitsplatz geprüft werden.
Ist ein Zündhütchensetzsystem enthalten? Ja. Kleine und große Setzeinheiten sind bestätigt. Wer lieber getrennt setzt, kann den Arbeitsablauf dennoch auf ein separates Hand- oder Bankgerät ausrichten.
Ist die Co-Ax B5 schneller als eine progressive Presse? Nein, nicht im Sinn maximaler Stückzahl. Die B5 ist eine Einstationenpresse und priorisiert Übersicht, schnellen Matrizenwechsel und kontrollierte Einzelprozesse.
Wie wird die Presse sicher montiert und gepflegt? Forster sieht vier 1/4″-Montagebohrungen vor. Montiere verwindungssteif, trage beim Betrieb eine Schutzbrille, halte Hände aus Quetschstellen und pflege bewegte beziehungsweise blanke Teile sparsam mit geeignetem Öl nach Anleitung.
Black-Raptor-Kurzfazit
Die Co-Ax B5 lohnt sich, wenn Präzisionsablauf und kontrollierter Matrizenwechsel wichtiger sind als maximale Serienleistung. Miss den Hülsenrand, plane passende Cross-Bolt-Lockringe ein und gib der Presse eine wirklich steife Basis – dann spielt das Co-Ax-Prinzip seine Stärke aus.