System and stock of the optimized R8 Professional 2.0 in black-brown and in the version for a semi-weight barrel.
With the synthetic stock – here in black-brown – the Blaser R8 Professional 2.0 bolt-action rifle is a hunting rifle for harsh conditions that withstands any weather. The improvements that Blaser has made compared to the predecessor model have not affected the compatibility of the components with those of the first generation. Here are some of the modifications of the R8 Professional 2.0:
- the system, firmly embedded in the stock, achieves even better precision,
- the buttstock can be adjusted in length with two optional modules and its comb is height-adjustable,
- the palmswell has been ergonomically optimized, making the rifle suitable for both right- and left-handed shooters,
- a new surface texture of the firmly attached elastomer grip inserts provides a better grip,
- a weight optimization of around 100 g increases maneuverability, and
- the barrel surface is optimally protected against corrosion thanks to its DLC A+ coating.
The Stock
The one-piece stock – here in black-brown – is equipped with elastomer inserts on the grip surfaces, which feel pleasant in the hands due to the new, improved structure, even in wet and cold conditions. The inserts are no longer glued on as before and thus prone to wear, but are an integral part of the stock. The pistol grip is steeper than in the predecessor model, featuring a palmswell on both sides, making the rifle suitable for both right- and left-handed shooters. The stock comb is adjustable by up to 30 mm at the push of a button, and the length of the buttstock can be varied with optionally available modules. The stock pad noticeably reduces recoil. The stock is designed in this version to accommodate a semi-weight barrel. The R8 semi-weight barrels are approximately 300 g heavier than Blaser's standard barrels. This improves the rifle's balance, increases precision, and reduces recoil.
The System
The system housing is firmly connected to the stock in the R8 Professional 2.0. This further enhances precision. The manual cocking system guarantees the safety familiar from the R8 by relaxing the firing spring. The tension occurs only immediately before the shot by pushing the cocking slider forward. The straight-pull repeater is quickly reloadable. The trigger unit is made of polymer, and the single-stage direct trigger has a trigger weight of 750 g.
📦 Scope of Delivery
- Cover caps for magazine and magazine well
- Hex key for disassembling the rifle
- small tube of grease
⚙️ Technical Data
- Type: System and stock for configuring the R8 Professional 2.0 with heavy-weight barrel
- Stock: Synthetic with firmly attached elastomer inserts
- Stock type: Pistol grip with adjustable comb and optional length variation
- Stock color: Black-brown
- System material: Dural
- Firing pin safety
- Material trigger unit: Polymer
- Trigger: Direct trigger
- Trigger weight: 750 g
(Show description in original language)
System und Schaft der optimierten R8 Professional 2.0 in Schwarzbraun und in der Ausführung für einen Semi-Weight-Lauf.
Mit dem Synthetik-Schaft – hier in Schwarzbraun – ist die Blaser R8 Professional 2.0-Repetierbüchse ein Jagdgewehr für raue Bedingungen, das jeder Witterung trotzt. Die Verbesserungen, die Blaser gegenüber dem Vorgängermodell vorgenommen hat, haben die Kompatibilität der Komponenten mit denen der ersten Generation nicht beeinträchtigt. Hier einige der Modifikationen der R8 Professional 2.0:
- durch das fest in den Schaft eingebettete System wird eine noch bessere Präzision erreicht,
- der Hinterschaft ist durch zwei optionale Module in der Länge anpassbar und sein Rücken in der Höhe verstellbar,
- der beidseitige Palmswell wurde ergonomisch optimiert, die Büchse ist für Rechts- und Linksschützinnen und -schützen geeignet,
- eine neue Oberflächenstruktur der fest verbundenen Elastomer-Griffeinlagen sorgt für einen besseren Griff,
- eine Gewichtoptimierung um rund 100 g erhöht die Führigkeit und
- die Laufoberfläche ist dank ihrer DLC A+ Beschichtung optimal gegen Korrosion geschützt.
Der Schaft
Der einteilige Schaft – hier in Schwarzbraun – ist an den Griffflächen mit Elastomer-Einlagen versehen, die mit der neuen, verbesserten Struktur haptisch angenehm in den Händen liegen, auch bei Nässe und Kälte. Die Einlagen sind nicht mehr wie früher aufgeklebt und somit anfällig für Verschleiß, sondern fester Bestandteil des Schafts. Der Pistolengriff ist steiler als beim Vorgängermodell, er hat beidseitig einen Palmswell, so dass die Büchse für Rechts- und Linksschützinnen und -schützen geeignet ist. Der Schaftrücken ist per Knopfdruck um bis zu 30 mm verstellbar, die Länge des Hinterschafts kann mit optional erhältlichen Modulen variiert werden. Die Schaftkappe mindert den Rückstoß spürbar. Der Schaft ist in dieser Ausführung so ausgelegt, dass er einen Semi-Weight-Lauf aufnehmen kann. Die R8 Semi Weight-Läufe sind ca. 300 g schwerer als die Standardläufe von Blaser. Dadurch schwingt die Büchse besser, die Präzision wird erhöht und der Rückstoß ist geringer.
Das System
Das Systemgehäuse ist bei der R8 Professional 2.0 fest mit dem Schaft verbunden. Damit wird die Präzision nochmals gesteigert. Das Handspannsystem garantiert die von der R8 gewohnte Sicherheit mittels Entspannung der Schlagfeder. Die Spannung erfolgt erst unmittelbar vor dem Schuss durch das Vorschieben des Spannschiebers. Der Geradezug-Repetierer ist schnell nachladbar. Die Abzugseinheit ist aus Polymer gefertigt, der trockenstehende Direktabzug hat ein Abzugsgewicht von 750 g.
📦 Lieferumfang
- Abdeckkappen für Magazin und Magazinschacht
- Inbusschlüssel zum Zerlegen des Gewehrs
- kleine Tube Fett
⚙️ Technische Daten
- Typ: System und Schaft zur Konfiguration der R8 Professional 2.0 mit Semi-Weight-Lauf
- Schaft: Synthetik mit fest verbundenen Elastomer-Einlagen
- Schaftart: Pistolengriff mit verstellbarem Rücken und optionaler Variierung der Länge
- Schaftfarbe: Schwarzbraun
- Systemmaterial: Dural
- Schlagbolzensicherung
- Material Abzugseinheit: Polymer
- Abzug: Direktabzug
- Abzugsgewicht: 750 g