Note:
The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.
OLD SCHOOL MEETS NEW SCHOOL. PROVEN SPECIFICATIONS COMBINED WITH THE LATEST TECHNOLOGY. The V2 model has been significantly improved compared to its predecessor. It features a reinforced gearbox with steel bushings, a ported full metal piston rack, and an integrated FET system that provides active braking, low battery detection, and a switch power protection. The included torque motor with micro-switch supported E-trigger increases the consistency and response time of the electronic circuit. The upgrade pack enhances the reliability, durability, and versatility of the replica. The Kriss Vector AEG from Krytac can undoubtedly be described as the absolute highlight of 2017. Due to the huge demand, production has been completely booked out for months. For this reason, this AEG will be released first in the USA on June 30, 2017. We received the first shipment for Germany in October 2017. All dimensions of the new KRYTAC® KRISS® Vector AEG are 1:1 identical to its original counterpart. Additionally, the KRYTAC® KRISS® Vector AEG comes with some special extras such as an original licensed folding stock, ambidextrous fire selector lever, MIL-STD 1913 Picatinny Top Rail, MIL-STD 1913 Picatinny Bottom Accessory Rail, as well as a Trident flash hider with 14mm left thread. Inside, it features a vertically mounted gearbox with V2 compatible gears, piston, piston head, and cylinder. The gearbox spring is pulled by a short-type motor and is guided by a ball-bearing spring guide. The 0.5 version of the Kriss naturally has semi-automatic, double-shot burst, and fully automatic fire mode settings, which are activated by micro-switches and controlled by the integrated FET system in the gearbox. The only difference in function from the versions available abroad is the reduced energy to 0.5 Joules, which makes it exactly what it was designed for, the perfect CQB weapon! Other highlights include the installed KRYTAC® Rotary Hop Up and the installed 155mm inner barrel. The KRISS comes with a 95 round midcap magazine, which we really appreciate. Why no shortstroking? In shortstroking, the gears and the teeth of the piston are ground down. We believe that this change can negatively affect the durability of the gears or the piston (but does not have to). Therefore, we offer two alternative options for energy reduction: 1. Spring throttling With spring throttling, the disadvantage is that the weaker spring affects the shot noise. However, with this type of energy reduction, the advantage is that no other changes need to be made to the system. The screwed retaining bolt is glued in this variant to comply with legal regulations in Germany. 2. Volume reduction The volume reduction allows the use of a strong spring. This results in a crisper shot noise and has the advantages of shortstroking without its disadvantages. With volume reduction, nothing is drilled or milled.
External Features - Licensed KRISS Vector GEN II body - Licensed KRISS Vector GEN II folding stock - Licensed Defiance Flip Up Iron Sights - Ambidextrous fire selector lever - Semi-automatic, two-shot burst, and fully automatic firing mode - Ambidextrous safety lever - KRISS Vector GEN II pivoting trigger - MIL-STD 1913 Picatinny rails
Internal Features - 8mm Vector Mechbox - Integrated FET system - Electronic trigger - Padded cylinder head - Relief-cut cylinder window - Adjustable, rotating hop-up unit - Temperature and usage resistant hop-up bucking - KRYTAC high-torque motor with neodymium magnets (short type)
Delivery includes: Kriss Vector 1 midcap magazine A battery is not included in the delivery.
Rifles. A charger is not included in the scope of delivery. The depicted sight (Reddot) and the front grip are not included in the scope of delivery!
(Show description in original language)
OLD SCHOOL MEETS NEW SCHOOL. BEWÄHRTE SPEZIFIKATIONEN KOMBINIERT MIT NEUESTER TECHNIK. Das V2-Modell wurde im Vergleich zum Vorgängermodell erheblich verbessert. Es verfügt über ein verstärktes Getriebe mit Stahlbuchsen, eine portierte Vollmetall-Kolbenzahnstange und ein integriertes FET-System, das aktives Bremsen, eine Erkennung von niedrigem Batteriestand und einen Schaltleistenschutz bietet. Der im Lieferumfang enthaltene drehmomentstarke Motor mit Mikroschalter-unterstütztem E-Trigger erhöht die Konsistenz und Reaktionszeit der elektronischen Schaltung. Das Upgrade-Pack erhöht die Zuverlässigkeit, Haltbarkeit und Vielseitigkeit des Nachbaus. Die Kriss Vector AEG von Krytac kann ohne zu übertreiben als das absolute Highlight des Jahres 2017 bezeichnet werden. Aufgrund der riesigen Nachfrage ist die Produktion über Monate komplett ausgebucht. Aus diesem Grund kommt diese AEG als erstes am 30. Juni 2017 in den USA auf den Markt. Wir haben für Deutschland die erste Lieferung im Oktober 2017 erhalten. Alle Abmessungen der neuen KRYTAC® KRISS® Vector AEG sind 1:1 identisch mit ihrem originalen Vorbild. Zusätzlich kommt die KRYTAC® KRISS® Vector AEG mit einigen besonderen Extras wie etwa original lizensierten Klappschaft, beidseitig bedienbarer Feuerwahlhebel, MIL-STD 1913 Picatinny Top Rail, MIL-STD 1913 Picatinny Bottom Accessory Rail, sowie ein Trident Flashider mit 14mm Linksgewinde. Im inneren arbeitet eine vertikal eingesetzte Gearbox mit V2 kompatiblen Gears, Piston, Piston Head, und Zylinder. Die Gearboxfeder wird von einem Short-Type Motor aufgezogen und wird von einem Kugelgelagerten Springguide geführt. Die 0,5er Version der Kriss besitzt natürlich halbautomatische, doppelschuss-Salve und vollautomatische Feuerwahleinstellungen welche durch Mikroschalter betätigt und von dem in die Gearbox integrierten FET-System gesteuert werden. Von der Funktion zu Ihren im Ausland erhältlichen Versionen unterscheidet sie sich lediglich durch die reduzierte Energie auf 0,5 Joule, was sie aber auch genau zu dem macht, für was sie eigentlich konzipiert ist, die perfekte CQB Waffe! Weitere Highlights sind das verbaute KRYTAC® Rotary Hop Up und der verbaute 155mm Innenlauf. Die KRISS kommt mit einem 95 Schuss Midcap Magazin, was wir wirklich sehr begrüßen. Warum kein Shortstroking? Beim Shortstroking werden die Gears und die Zähne des Pistons abgeschliffen. Wir sind der Meinung, das diese Veränderung sich negativ auf die Haltbarkeit der Gears oder des Pistons auswirken kann (nicht muss). Deshalb bieten wir zwei alternative Möglichkeiten zur Energiereduktion an: 1. Federdrosselung Bei der Federdrosselung hat man den Nachteil, das sich die schwächere Feder auf das Schussgeräusch auswirkt. Allerdings hat man mit dieser Art der Energiereduzierung den Vorteil, das sonst keine Änderungen am System vorgenommen werden müssen. Der geschraubte Haltebolzen wird bei dieser Variante verklebt, damit die gesetzlichen Regelungen in Deutschland eingehalten werden. 2. Volume-Reduction Die Volume-Reduction ermöglicht den Einsatz einer starken Feder. Somit erhält man ein knackigeres Schussgeräusch und hat die Vorteile von Shortstroking ohne dessen Nachteile. Bei der Volume-Reduction wird nichts gebohrt oder gefräst. Äussere Features - Lizenziertes KRISS Vector GEN II Gehäuse - Lizenzierter KRISS Vector GEN II Klappschaft - Lizenzierte Defiance Flip Up Iron Sights - Beidhändig bedienbarer Feuerwahlhebel - Semiautomatischer, Zweischuss Burst und vollautomatischer Feuermodus - Beidhändig bedienbarer Sicherungshebel - KRISS Vector GEN II Pivoting Trigger - MIL-STD 1913 Picatinny Schienen Interne Features - 8mm Vector Mechbox - Integriertes FET System - Elektronischer Trigger - Padded Cylinder Head - Relief-cut Cylinder Window - Verstellbare, drehbare Hop Up Unit - Temperatur- und gebrauchsbeständiges Hop-Up Bucking - KRYTAC High-Torque Motor mit Neodym Magneten (Short Type) Lieferumfang: Kriss Vector 1 Midcap Magazin Ein Akku ist im Lieferumfang nicht inbegriffen. Ein Ladegerät ist im Lieferumfang nicht inbegriffen. Die abgebildete Zieloptik (Reddot) und der Frontgriff sind nicht im Lieferumfang enthalten!