-10 %
UTG ACCUSHOT 1" Picatinny/Weaver Integral Mount – Medium Profile
Price at the dealer: 17 €. Converted at the ECB rate as of October 21, 2026.
No permit required (18+)
72479 Straßberg, Germany
15
ID: 9895259
Purchase from outside the EU: The firearm goes through an importer in your country, the dealer handles the export.
How buying from Europe works
Shop safely with Gunfinder
Our AI-powered seller identity verification makes Gunfinder the safest marketplace online.
Learn more
Details
- Original language
- German
- Category
- Condition
- New
- Location
- 🇩🇪 72479 Straßberg, Germany
- Availability
- In stock
Freshness
This listing is based on a mirrored offer, where the listing data was synced to us from a shop, dealer, or external marketplace. Please note that temporary price discrepancies may occur due to possible delays in data transmission.
- Source
- Black Raptor
- Last updated
- about 7 hours ago
Description
Note:
The item is located abroad. Please note that delivery conditions, shipping times, and/or the purchase process may differ.
.br-product h2{font-size:1.2rem;margin-top:28px;}
.br-product h3{font-size:1rem;margin:0 0 8px;}
.br-product ul{padding-left:18px;}
.br-product .info-box{background:#ffdddd;border-left:6px solid #c40000;padding:12px;margin:20px 0;}
.br-product .tip-box{background:#eef6ff;border-left:6px solid #2a6fdb;padding:12px;margin:20px 0;}
.br-product .trust-box{background:#eaf7ea;border-left:6px solid #2f8f2f;padding:12px;margin:20px 0;}
.br-product .compare-box{background:#f5f5f5;border-left:6px solid #444;padding:12px;margin:20px 0;}
.br-product details{background:#f2f2f2;padding:10px;margin-bottom:8px;border-radius:4px;}
.br-product summary{font-weight:600;cursor:pointer;}
UTG ACCUSHOT 1 Inch Integral Mount is a one-piece medium-profile mount for 1-inch scopes on a Picatinny/Weaver base. When a scope doesn’t need offsetting, a solid one-piece mount is often cleaner than two separate rings, as long as the fixed geometry really fits.
This mount is not a side item you just toss into the cart. If ring size, rail type, or height are wrong, a simple part quickly becomes a follow-up problem: crooked stop, shifting eye relief, contact on the objective, or a scope that doesn’t sit where you need it on the rail.
This mount is deliberately simple: a fixed unit, medium profile, no offset function. That’s exactly why the pre-check has to be right.
Key Features
one-piece medium-profile mount for 1-inch scopes on Picatinny/Weaver base: function depends entirely on tube, rail, and height.
Interface: Picatinny/Weaver – carefully compare with your own setup before buying.
Tube size: 1 inch / 25.4 mm – don’t guess, check on the scope.
Profile height: Low, Medium, or High only makes sense if objective clearance and head position match.
Mount as a system part: evaluate ring, rail, eye relief, and usability together.
Active distinction: no universal solution for other rail or tube classes.
Our Assessment
UTG ACCUSHOT 1 Inch Integral Mount is strong when the purchase is based not on gut feeling but on a clean setup comparison. With AccuShot products, that’s the difference between sensible gear and frustration at the workbench or range.
With rings and mounts, honest limits are especially important. A solid mount can’t save a wrong interface. If tube, rail, or height don’t fit, it’s not the mount’s fault but the choice.
Black-Raptor Short Summary:
UTG ACCUSHOT 1 Inch Integral Mount is a good choice if you mount a 1-inch scope on Picatinny/Weaver and medium profile provides enough objective clearance.
Buy if: you mount a 1-inch scope on Picatinny/Weaver and medium profile provides enough objective clearance.
Don’t buy if: you need dovetail, 30 mm tube, offset, or flexible ring positions.
Important Classification Before Buying
First check the hard measurements: rail, tube diameter, profile height, free length, and space at the turret block. Then decide if Low, Medium, High, Integral, or Offset is more comfortable. This order prevents most wrong purchases.
This mount is deliberately simple: a fixed unit, medium profile, no offset function. That’s exactly why the pre-check has to be right.
Instructor Tip: dry mount before final tightening
First dry-fit optic and mount: clean rail, loosely set mount, insert optic, check stop, simulate protective caps, check turret access. Only when that fits, align and tighten stepwise. These five minutes save a lot of trouble later.
Direct Classification:
Compared to improvised adapter chains, a proper mount is
cleaner, lower, and better predictable. Compared to one-piece special solutions, a classic ring remains more flexible, while integral and offset mounts solve a specific geometry problem more precisely.
Avoid typical bad purchases
The most common mistake with mounts is assuming that almost fitting is good enough. Almost fitting ring height, almost fitting rail, or almost fitting tube diameter later lead to compromises you feel with every cheek weld. A mount is good when it works unobtrusively. As soon as you constantly have to compensate, the choice was wrong.
Second mistake: The profile height is chosen based on looks rather than use. Low often looks tidy but can collide with objective bell, flip caps, or loading/operating elements. Too high solves space problems but often worsens head position and repeatability. That’s exactly why the dry run belongs before the final mounting.
Third mistake: After the first tightening, no further checks are made. After the first shots or training sessions, the mount should be visibly and tactilely checked: is everything straight, does the scope remain level, are screws and clamping unobtrusive, does the eye relief stay the same? This check is not distrust of the product but good workshop practice.
Setup adjustment in practice
Build the adjustment in this order: determine rail type, measure tube, check profile height based on objective and protective cap, check eye relief in the cheek weld, then finally tighten screws. Reversing this order quickly leads to buying a mount that looks plausible on the bench but doesn’t convince in the cheek weld.
In practice, this means: the mount only fits when it works with the real scope, real caps, and your real cheek weld position. An empty stock on the bench says less than a short dry run with the complete setup.
Application scenarios
On the bench, the scope is first loosely placed in the mount before anything is finally tightened.
In the cheek weld, you check eye relief and head position with normal body posture, not just from above on the bench.
With protective caps, turret block, and adjustment rings, enough space must remain so nothing jams or is operated unnaturally later.
After the first mounting, check whether the rail really fits the clamp and no part is forced into position just by screw pressure.
Features & construction
UTG ACCUSHOT 1 Inch Integral Mount belongs to the AccuShot mount family and must be understood as the connection between scope and platform. The technical quality of the mount only helps if the geometry is right: ring diameter, rail standard, free length, profile height, and space at the turret block must fit together before final mounting.
In practice, the mount decides repeatability. A properly fitting ring holds the scope not only firmly but gives you a reliable starting point for zeroing, checking, and later adjustments. If something jams, tilts, or fits too tight, the choice is not finished yet.
Technical data
Tube diameter: 1 inch / 25.4 mm.
Rail Type: Picatinny/Weaver according to available information.
Profile: Medium Profile - lower than High but with less objective clearance.
Design: one-piece - fixed ring geometry instead of freely selectable ring spacing.
Material: Aluminum according to available information.
Not suitable for 30 mm or 34 mm tubes.
Not intended as an offset solution.
Scope of delivery
One-piece integral mount for 1-inch scopes according to available information.
Note:
Check rail, tube size, build height, and free space on the scope before purchase. Mounts are firearm-adjacent accessories; proper installation, even tightening, and checking after the first shots are part of it.
FAQ
Does this mount fit every scope? No. The decisive factor is the tube di...
Diameter: 1 inch / 25.4 mm. Other tube sizes require a different mount.
Does it fit every rail? No. This classification refers to Picatinny/Weaver. Dovetail, Picatinny, and Weaver must not be blindly equated.
Which profile height should I choose? As low as possible, but only as low as necessary so that the objective, protective caps, and operation remain free and the head position is natural.
What is important before tightening? First align loosely, check eye relief in the shooting position, check the gap pattern, and then tighten evenly step by step. Don’t try to make an unsuitable mount fit by screwing it tight.
When is another solution more sensible? If you need dovetail, 30-mm tube, offset, or flexible ring positions. Then another ring size, a different interface, or an offset/integral solution is the cleaner choice. (Show description in original language)
UTG ACCUSHOT 1 Zoll Picatinny Integral Mount Robustes UTG Zubehör für Optikmontage, Ausrüstung und zuverlässige Anpassungen. Die kompakte Ausführung unterstützt eine sichere und praxisgerechte Nutzung im Outdoor- und Trainingsbereich.
Originalprodukt von UTG
Passform, Maße und Kompatibilität vor Bestellung prüfen
Trocken, sauber und geschützt lagern
Bei ausverkauften Varianten: Lieferzeit auf Anfrage.
Originalprodukt von UTG
Passform, Maße und Kompatibilität vor Bestellung prüfen
Trocken, sauber und geschützt lagern
Bei ausverkauften Varianten: Lieferzeit auf Anfrage.
