-19 %

BUNDLE | 100J+ FULL-TUNING-SET | SHORT VERSION | Milsig Valken M17 CQC A2 | CQMF G3 | EXTREME PERFORMANCE | STEEL or ALU to choose

BUNDLE | 100J+ FULL-TUNING-SET | SHORT VERSION | Milsig Valken M17 CQC A2 | CQMF G3 | EXTREME PERFORMANCE | STEEL or ALU to choose

284.60 € 229.95 €

92439 Bodenwöhr, Germany

ID: 9757977

Safe shopping with Gunfinder

Our AI-supported provider identity verification makes Gunfinder the safest online marketplace. Learn more

About the seller

HomeDefence-24 GmbH

Retailer

459 offers

Details

Original language

German

Category

Acquisition authorization

Required - What am I allowed to buy?

Condition

New

Location

🇩🇪 92439 Bodenwöhr, Germany

Availability

Available

Timeliness

This offer is based on an offer mirroring, where the offer data was transferred from a shop, merchant, or external marketplace to us. Please note that temporary price discrepancies may occur due to possible delays in data transmission.

Source: HomeDefence-24 GmbH
Last updated: before about 10 hours

Description

Note: The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.

Installation and Shooting Video:

1x STEEL TUNING BARREL - SHORT VERSION
WARNING / SELECTION between CQC A2 and CQMF G3 (STEEL and ALU)

suitable for the Milsig / Valken M17
Material: Steel blued or ALU anodized, depending on selection
Dimensions: 190mm long, thread (22x1.5)
Diameter: .683 / approx. 17.35mm
very high performance increase, depending on modification up to 100Joule+

+
Unleash the full potential of your marker with our revolutionary HEAT CORE Chamber. Up to 1000% performance increase possible!!
WARNING: For bottle pressures over 800 PSI, our springs (Tuning Bolt Spring, Sear Spring and/or Bolt Locking Spring) are recommended. This is necessary to prevent unintended firing in the worst case.
ASA Tuning HEAT CORE Chamber

Upgrade valve housing for the Milsig Valken M17
enlarged air chamber for increased volume/shots
Integrated manometer, makes it easier to read the current pressure
CNC machined, original dimensions
Material: Aluminum, black anodized

Delivery includes:

1x Chamber
4x M6 screws
1x O-Ring

+
1x Tuning Bolt Spring

suitable for the Milsig M17
Material: Steel
Quality: very robust, no bending or warping
up to 200% performance increase, depending on the setup of your marker

+
2x BOLT LOCKING SPRING

suitable for the Valken Milsig M17
Material: Steel
Color: silver
up to 200% performance increase, depending on the setup of your marker

+
2x SEAR SPRING

suitable for the Valken Milsig M17
Material: Steel
Color: black

+
3x HEAT CORE BOLT BUMPER

suitable for the Milsig Valken M17
Material: 2-component industrial silicone
Thickness: 3mm

Shore hardness: A26

Tear elongation limit: 500%
Temperature resistance up to 250° Celsius
Maximum pressure: 2000 PSI HPA bottle output pressure (tested)

+
6x UPGRADE CUSTOM BALL DETENTS

suitable for the Valken Milsig M17
Material: 2K silicone
perfect fit
easy replacement

+
4x O-Ring HEAT CORE
+
MUZZLE BRAKE | 22x1.5mm

suitable for the FSC Pistol, Valken/Milsig M17 and HDX68
Material: Alu, powder-coated and black anodized
Precise fit, machined from solid
Thread: 22 x 1.5 mm
Diameter: approx. 2.5 cm
Length: 7 cm (Show description in original language)

Installation- und Schuss Video:

1x STEEL TUNING BARREL - SHORT VERSION
ACHTUNG / AUSWAHL zwischen CQC A2 und CQMF G3 (STAHL und ALU)

geeignet für die Milsig / Valken M17
Material: Stahl brüniert oder ALU eloxiert, je nach Auswahl
Maße: 190mm lang, Gewinde (22x1,5)
Durchmesser.683 / ca. 17,35mm
sehr hohe Leistungssteigerung, je nach Umbau bis zu 100Joule+

+
Holt das volle Potenzial eures Markierers mit unserem revolutionären HEAT CORE-Chamber raus. B is zu 1000 % Leistungssteigerung möglich!!
ACHTUNG: Für Flaschendrücke über 800 PSI werden unsere Federn (Tuning Bolt Spring, Sear Spring und/oder Bolt Locking Spring) empfohlen. Dies ist erforderlich, um im schlimmsten Fall ein ungewolltes Abfeuern zu verhindern.
ASA Tuning HEAT CORE Chamber

Upgrade Ventilgehäuse f ür die Milsig Valken M17
vergrößerte Luftkammer für erhöhtes/-n Volumen/Schuss
Integriertes Manometer, erleichtert das Ablesen des aktuellen Drucks
CNC gefräst, Original Maße
Material: Aluminium, schwarz eloxiert

Lieferumfang:

1x Chamber
4x M6 Schrauben
1x O-Ring

+
1x Tuning Bolt Feder

geeignet für die Milsig M17
Material: Stahl
Beschaffenheit: sehr robust, kein durch- und verbiegen
bis zu 200% Leistungssteigerung, je nach Set-Up deines Markierers

+
2x BOLT LOCKING SPRING

geeignet für die Valken Milsig M17
Material: Stahl
Farbe: silber
bis zu 200% Leistungssteigerung, je nach Set-Up deines Markierers

+
2x SEAR SPRING

geeignet für die Valken Milsig M17
Material: Stahl
Farbe: schwarz

+
3x HEAT CORE BOLT BUMPER

geeignet für die Milsig Valken M17
Material: 2 Komponenten Industriesilikon
Dicke: 3mm

Shore Härte: A26

Reiß-Dehngrenze: 500%
Temperaturbeständigkeit bis zu 250°Grad
Maximaldruck: 2000PSI HPA Flaschenausgangsdruck (getestet)

+
6x UPGRADE CUSTOM BALL DETENS

geeignet für die Valken Milsig M17
Material: 2K-Silikon
perfekte Passform
einfacher Tausch

+
4x O-Ring HEAT CORE
+
MUZZLE BRAKE | 22x1,5mm

geeignet für die FSC Pistol, Valken/Milsig M17 und HDX68
Material: Alu, gepulvert und schwarz eloxiert
Passgenau, aus dem vollen gedreht
Gewinde: 22 x 1,5 mm
Durchmesser: ca. 2,5 cm
Länge: 7 cm