Slugmaker 50.26 | HDR50 | DIY Hotglue Bullets | NEW VERSION 12.45 and 12.5D

Slugmaker 50.26 | HDR50 | DIY Hotglue Bullets | NEW VERSION 12.45 and 12.5D

34.95 €

ID: 8778552

Safe shopping with Gunfinder

Our AI-supported provider identity verification makes Gunfinder the safest online marketplace. Learn more

About the seller

HomeDefence-24 GmbH

Retailer

323 offers

Details

Original language

German

Category

Condition

New

Location

🇩🇪 -

Availability

Available

Timeliness

This offer is based on an offer mirroring, where the offer data was transferred from a shop, merchant, or external marketplace to us. Please note that temporary price discrepancies may occur due to possible delays in data transmission.

Source: HomeDefence-24 GmbH
Last updated: before 14 days

Description

Note: The item location is abroad. Please note that this may affect delivery conditions, shipping times, and/or the purchasing process.

Scan the QR code to access the user manual.

Details | Improvement:

all outer holes are 12.50mm (ALU drum) e.g. Buckshot with steel balls
all inner holes are 12.45mm (standard drum)
capacity has been increased to 26 projectiles
custom manufacturing of projectiles (e.g. hot glue with tip etc.)
high-quality pins made of steel for pushing out the finished hot glue slugs

For a perfect result, we recommend oiling the mold with silicone spray and applying 2-3 mm of hot glue above the mold. Since the hot glue projectiles shrink when cooling.
Make projectiles yourself, according to the principle practice makes perfect!!

Scope of delivery:

1x Slugmaker 50.26
3x pins
1x sample pack of BBS 4.5 and 6MM (Show description in original language)

Scanne den QR Code und gelange so zur Gebrauchsanleitung.

Details | Verbesserung:

alle äußeren Bohrungen betragen 12,50mm (ALU-Trommel) z.B. Buckshot mit Stahlkugeln
alle inneren Bohrungen betragen 12,45mm (Standard-Trommel)
Kapazität wurde auf 26 Geschosse erhöht
Individuelle Herstellung der Geschosse (z. B. Hotglue mit Sptize etc.)
hochwertige PIN`s aus Stahl zum herausdrücken der fertigen Hotglue Slugs

Für ein perfektes Ergebnis empfehlen wir die Form mit Silikon-Spray einzuölen und 2-3 mm den Heißkleber über der Form aufzutragen. Da die Hotglue Geschosse beim Abkühlen kleiner werden.
Geschosse selber machen, nach dem Prinzip Übung macht den Meister!!

Lieferumfang:

1x Slugmaker 50.26
3x Pins
1x Probepackung BBS 4.5 und 6MM