DAA PDR PRO II SIG X FIVE RH NERO
79,50 €
Di libera vendita
4240 Freistadt, Austria
0
ID: 10094360
Questa offerta non è attualmente disponibile.
Acquista in sicurezza con Gunfinder
La nostra verifica d'identità con IA sui venditori rende Gunfinder il marketplace più sicuro online.
Scopri di più
Dettagli
- Lingua originale
- Tedesco
- Categoria
- Condizione
- Nuovo
- Posizione
- 🇦🇹 4240 Freistadt, Austria
- Disponibilità
- non disponibile
Aggiornamento
Questa offerta si basa su una sincronizzazione dei dati, in cui le informazioni sull'offerta sono state trasmesse da un negozio, rivenditore o marketplace esterno. Tieni presente che potrebbero verificarsi temporanee discrepanze di prezzo a causa di possibili ritardi nella trasmissione dei dati.
- Fonte
- Shootingstore
- Ultimo aggiornamento
- circa 11 ore fa
Descrizione
Nota:
L'articolo si trova all'estero. Tieni presente che le condizioni di consegna, i tempi di spedizione e/o la procedura di acquisto potrebbero variare.
Verbessertes, einstellbares Kydex-Holster für die IPSC Production Division und alle Schützen die ein Kydex-Holster bevorzugen
Beschreibung:
- Verbindung zwischen Kugelgelenk und Holster aus Aluminium
- stufenlose Höhenverstellung ohne die anderen Einstellungen zu verstellen - die Verstellung kann im montierten Zustand erfolgen
- noch größerer Einstellbereich des Kugelgelenks - Holster sitzt näher am Körper
- geringere Abdeckung im Abzugsbereich dadurch kann die Waffe besser gegriffen werden
- etwas geringere Wandstärke und passgenauere Fertigung
- die Aussparung vorne wurde weiter herunter gezogen damit is schnelleres Ziehen der Waffe mit Vorwärtsbewegung möglich
- der Ziehwiderstand kann besser eingestellt werden
Die Vorteile des PDR-Pro wurden dabei erhalten:
- glatter, schnörkelloser, für schnelles Ziehen optimierter Holster
- innovatives Kugelgelenk für vielseitige Einstellmöglichkeiten
- kaum auftragende Befestigung für Wettkampfgürtel
Erhältlich für alle gängigen Waffen der dynamischen Disziplinen (Glock, STI, SigSauer, Tanfoglio, CZ, S&W usw.).
Ausschließlich in schwarz für Rechts- und Linkshänder.
LIEFERUNG OHNE WAFFE!
With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.
We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.
The first area of focus and improvement was the rail, the part which joins the belt hanger ball joint and the holster body.
We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.
The new rail attaches to the holster body more parallel to the gun’s slide, which increases the usable range of adjustment in the ball joint, allowing you to bring the gun much closer to the body than with the previous rail design.
The holster body itself has undergone several improvements as well. The high inner flap which previously covered most guns’ safeties has been lowered, allowing you to obtain a more complete in-the-holster shooting-grip. The material has been made slightly thinner to improve precision fit and retention of the pistol, and the tension spacers have been modified and improved. The cutout in the front of the holster has been lowered further, to facilitate faster holster clearance.
And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.
Available only in Black, for right-handed or left-handed shooters.
With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.
We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.
The first area of focus and improvement was the rail, the part which joins the belt hanger ball joint and the holster body.
We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.
The new rail attaches to the holster body more parallel to the gun’s slide, which increases the usable range of adjustment in the ball joint, allowing you to bring the gun much closer to the body than with the previous rail design.
The holster body itself has undergone several improvements as well. The high inner flap which previously covered most guns’ safeties has been lowered, allowing you to obtain a more complete in-the-holster shooting-grip. The material has been made slightly thinner to improve precision fit and retention of the pistol, and the tension spacers have been modified and improved. The cutout in the front of the holster has been lowered further, to facilitate faster holster clearance.
And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.
Available only in Black, for right-handed or left-handed shooters.
With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.
We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.
The first area of focus and improvement was the rail, the part which joins the belt hanger ball joint and the holster body.
We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.
The new rail attaches to the holster body more parallel to the gun’s slide, which increases the usable range of adjustment in the ball joint, allowing you to bring the gun much closer to the body than with the previous rail design.
The holster body itself has undergone several improvements as well. The high inner flap which previously covered most guns’ safeties has been lowered, allowing you to obtain a more complete in-the-holster shooting-grip. The material has been made slightly thinner to improve precision fit and retention of the pistol, and the tension spacers have been modified and improved. The cutout in the front of the holster has been lowered further, to facilitate faster holster clearance.
And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.
Available only in Black, for right-handed or left-handed shooters.
