KYNSHOT Peso distanziatore 2,5 oz

29,90 €

Di libera vendita

8700 Leoben, Austria

ID: 10094160

Questa offerta non è attualmente disponibile.

Acquista in sicurezza con Gunfinder

La nostra verifica d'identità con IA sui venditori rende Gunfinder il marketplace più sicuro online. Scopri di più

Il venditore

Earms

Rivenditore

3.748 annunci

Dettagli

Lingua originale

Tedesco

Categoria

Condizione

Nuovo

Posizione

🇦🇹 8700 Leoben, Austria

Disponibilità

non disponibile

Aggiornamento

Questa offerta si basa su una sincronizzazione dei dati, in cui le informazioni sull'offerta sono state trasmesse da un negozio, rivenditore o marketplace esterno. Tieni presente che potrebbero verificarsi temporanee discrepanze di prezzo a causa di possibili ritardi nella trasmissione dei dati.

Fonte: Earms
Ultimo aggiornamento: circa 10 ore fa

Descrizione

Nota: L'articolo si trova all'estero. Tieni presente che le condizioni di consegna, i tempi di spedizione e/o la procedura di acquisto potrebbero variare.

Our KynSHOT buffer weight, that was designed in cooperartion with Blitzkrieg Components, LLC., can be used with our PCC hydraulic buffers, and in certain cases, our AR hydraulic buffers to add mass in front of the buffer. Compatible accessories see under this article, accessories. The Spacer Weight also adds .75" in length to the buffer system, and adds 2.5 ounces of weight, which is designed for a close fit buffer tube while preventing tilting of the buffer during cycling. The weight has several functions: the additional mass further delays initial bolt movement and slows the bolt velocity, it helps to keep the buffer aligned in the buffer tube, and its additional length can be used to make a short stroke system if desired. BENEFITS If you want to use this weight and have your bolt cycle the full distance and stop behind the bolt catch, then you need to use an AR-10/A5 length buffer tube since they are .75" longer on the inside. If you use this weight with our buffer in a typical AR-15 buffer tube it will create a short stroke system that stops forward of the bolt catch. Additional mass is very important in any PCC short stroke set up since the bolt doesn't have as much time to slow down. SPECIFICATIONS Optimal set up - We believe that the optimal set up for most 8-16" barreled guns is to run this PCC Buffer weight in front of an RB5015HD buffer with a .308 carbine buffer spring in an AR10/A5 buffer tube for full bolt stroke. If your bolt has a weight pinned into the rear of it, we recommend leaving that in place to retain full mass of your bolt. We do have customers who like the short-stroke set up the best and everyone's perception is a bit unique, but it has been our experience that the full-stroke set up is the smoothest running and softest recoiling overall and you retain the use of your bolt catch. The weight is made of machined 17-4 Stainless Steel. Weight: 2.5 Oz / 70,87g MADE IN THE USA

Stampa

KYNSHOT Peso distanziatore 2,5 oz

Earms

Dettagli

Aggiornamento

Descrizione

Potrebbe interessarti anche

Vendi gratis su Gunfinder

Aste in evidenza

Vendi gratis su Gunfinder

Offerte sponsorizzate