BCM AR15 MCMR-5 Complete Upper Receiver .300 Blackout 7", immagine 1 di 6

BCM AR15 MCMR-5 Complete Upper Receiver .300 Blackout 7", immagine 2 di 6

BCM AR15 MCMR-5 Complete Upper Receiver .300 Blackout 7", immagine 3 di 6

BCM AR15 MCMR-5 Complete Upper Receiver .300 Blackout 7", immagine 4 di 6

BCM AR15 MCMR-5 Complete Upper Receiver .300 Blackout 7"

1.829 €

Porto d'armi o Nulla Osta richiesto

8700 Leoben, Austria

ID: 10087379

Questa offerta non è attualmente disponibile.

Acquista in sicurezza con Gunfinder

La nostra verifica d'identità con IA sui venditori rende Gunfinder il marketplace più sicuro online. Scopri di più

Il venditore

Earms

Rivenditore

3.748 annunci

Dettagli

Lingua originale

Tedesco

Categoria

Autorizzazione all'acquisto

Obbligatorio - Cosa posso acquistare?

Condizione

Nuovo

Posizione

🇦🇹 8700 Leoben, Austria

Disponibilità

non disponibile

Aggiornamento

Questa offerta si basa su una sincronizzazione dei dati, in cui le informazioni sull'offerta sono state trasmesse da un negozio, rivenditore o marketplace esterno. Tieni presente che potrebbero verificarsi temporanee discrepanze di prezzo a causa di possibili ritardi nella trasmissione dei dati.

Fonte: Earms
Ultimo aggiornamento: circa 19 ore fa

Descrizione

Nota: L'articolo si trova all'estero. Tieni presente che le condizioni di consegna, i tempi di spedizione e/o la procedura di acquisto potrebbero variare.

About the BCM® Standard 7" 300 BLACKOUT Complete Upper Receiver w/ MCMR-5 Handguard Continuous taper barrel profile designed for optimal weight, balance, and performance. Tapered barrel profile out front, for easier maneuverability. No sharp handguard cap shoulder for improved barrel harmonics and improved accuracy. PROFESSIONAL GRADE - LIFE SAVING TOOLS Manufactured by Bravo Company MFG, Inc. (BCM) by professional gunsmiths These Complete Upper Receiver are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired. SPECIFICATIONS BCM® AR15 UPPER RECEIVER Receiver Machined from Aluminum Forgings 7075-T6 and Hardcoat Anodized per MIL-A-8625F, Type III, Class 2 M4 Feed Ramp Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 T-Marked Upper Receiver The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission. BCM® BOLT CARRIER GROUP Chrome Lined Carrier (Full Auto Profile) Chrome Lined Gas Key Hardened to USGI Specifications, w/ Staked Grade 8 Fasteners per MIL-SPEC Machined from Mil-Spec Carpenter No. 158® Steel to USGI specifications HPT/MPI (High Pressure Tested/Proof) · (Magnetic Particle Inspected) Shot Peened Tool Steel Extractor w/ BCM® Extractor Spring Black Extractor Insert Heat treated Superfinished Carrier Body Forward Assist Serrations BCM® BARREL Independently Certified MIL-SPEC 11595E Barrel Steel, Manganese Phosphate Barrel Finish on Entire Barrel 7" Government Profile Barrel 1/7 Twist M4 Feed Ramp Extension USGI 5.56mm NATO Chrome Lined Bore and Chamber Pistol Length Gas System HPT/MPI(High Pressure Test) (Magnetic Particle Inspected), per MIL-SPEC Muzzle thread: 5/8-24 UNEF Chrome Bore and Chamber One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and the chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity and also resists fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time for maintenance and cleaning. Mil-Spec Barrel Steel (Certified Mil-B-11595E) BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures. Manganese Phosphate Barrel Finish Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil to resist corrosion from the elements. BCM barrels are phosphated before the installation of front sights. This is a much more extensive assembly operation but insures that the entire barrel is finished and protected . . .even under the front sight base. USGI 1/7 Twist Rate The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantrymen. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personnel, and personal defense for its' superior ballistics. As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures. BCM® has taken great care to ensure the best possible performance and interchangeability. However, due to the large operational range of 300 Blackout ammunition in the market place, BCM® cannot guarantee function will all ammunition types in all conditions. These barrels were designed to run High Velocity ammo only with a H3 buffer. Fine tuning may be required in limited instances based on ammo and buffer choices that work best for the desired application. BCM® also recommends running the Crane O-ring (provided with all BCM® Bolt Carrier Groups) over the extractor with 300 Blackout. BCM® GUNFIGHTER MCMR M-LOK Handguard Kit 5" Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform.This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. MCMR features M-LOK Compatible mounting system Free Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shooting Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight Proprietary engineered profile offers additional cross sectional strength Steel Barrel Nut (same KMR, MCMR, and QRF series), to resist movement under heat Hard Coat Anodized per Mil-A-8625F, Type III, Class 2 INFORMATIONS Included BCM Flash Hider, NON pinned or welded Included BCM MK2 Ambidextrous Charging Handle - Large Latch Included BCM 3" M-LOK Picatinny Rail Section Included BCM GUNFIGHTER QD M-LOK Low-Pro Sling Mount Including C.I.P. Compatible with AR-15 Lower receiver according to Mil-Spec diameters AT - Category B Compatible accessories, see under this article, accessoriesMADE IN THE USA

Stampa