ADAMS ARMS Kit Piston LM Micro Block Regolabile PISTOLA

429,90 €

Di libera vendita

8700 Leoben, Austria

ID: 10084069

Acquista in sicurezza con Gunfinder

La nostra verifica d'identità con IA sui venditori rende Gunfinder il marketplace più sicuro online. Scopri di più

Il venditore

Earms

Rivenditore

3.748 annunci

Dettagli

Lingua originale

Tedesco

Categoria

Condizione

Nuovo

Posizione

🇦🇹 8700 Leoben, Austria

Disponibilità

tempi di consegna sconosciuti

Aggiornamento

Questa offerta si basa su una sincronizzazione dei dati, in cui le informazioni sull'offerta sono state trasmesse da un negozio, rivenditore o marketplace esterno. Tieni presente che potrebbero verificarsi temporanee discrepanze di prezzo a causa di possibili ritardi nella trasmissione dei dati.

Fonte: Earms
Ultimo aggiornamento: circa 7 ore fa

Descrizione

Nota: L'articolo si trova all'estero. Tieni presente che le condizioni di consegna, i tempi di spedizione e/o la procedura di acquisto potrebbero variare.

Adjustable P Series Micro Piston Low Mass Conversion Kit for Pistol Lenght DI Gas Systems This system will work with .223 REM/5.56 x 45mm NATO ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Low Mass Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Bolt Spring Drive Rod with Rod Bushing and Rod Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder Carbine: 7.866″ from barrel extension to shoulder Mid: 9.866″ from barrel extension to shoulder Rifle: 13.241″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA

Stampa