Proiettili Monolitici Hasler Ariete cal 10,3mm (.415), 210grs
1,80 €
Di libera vendita
5202 Neumarkt am Wallersee, Austria
0
ID: 10081108
Acquista in sicurezza con Gunfinder
La nostra verifica d'identità con IA sui venditori rende Gunfinder il marketplace più sicuro online.
Scopri di più
Dettagli
- Lingua originale
- Tedesco
- Categoria
- Condizione
- Nuovo
- Posizione
- 🇦🇹 5202 Neumarkt am Wallersee, Austria
- Disponibilità
- disponibile
Aggiornamento
Questa offerta si basa su una sincronizzazione dei dati, in cui le informazioni sull'offerta sono state trasmesse da un negozio, rivenditore o marketplace esterno. Tieni presente che potrebbero verificarsi temporanee discrepanze di prezzo a causa di possibili ritardi nella trasmissione dei dati.
- Fonte
- Ammoworx Austria
- Ultimo aggiornamento
- circa 10 ore fa
Descrizione
Nota:
L'articolo si trova all'estero. Tieni presente che le condizioni di consegna, i tempi di spedizione e/o la procedura di acquisto potrebbero variare.
Ariete bullets expand in mushroom, instead of fragmenting like bullets from Hunting line.
Hasler Ariete bullets feature a unique double section hollow to optimize the terminal effect, resulting in a rapid, controlled expansion of the bullet, while keeping outstanding weight retention.
Tips for reloading with Hasler bullets
Hasler bullets may have two O-rings and one Pilot O-ring, or three O-rings and one Pilot O-ring.
The Pilot O-ring has a different form and it is at the edge of the bullet, its function is to make the insertion of the ball into the barrel the more coaxial as possible, in order to gain the highest precision.
During the assembling process, it is crucial that at least two o-rings are kept inside the neck (see explanatory image).
The neck must be re-calibrated for at least 2/3 of its length; if you re-calibrate it through its whole length, it is even better.
The neck must offer sufficient strength to firmly retain the ogive. For ogives long as the 30/168/Ariete and 7/152 Ariete, a slight crimping with ”LEE Factory Crimp Die” is a good idea to improve the combustion of gunpowder. With semi-automatic weapons, it is desirable to do a light crimping or a narrower calibration of the neck.
If you are using dies with the bushing, you have to position them so that there is still enough room for the o-rings inside the neck.
Freeboring: this parameter is crucial for shooting precision, usually in almost every caliber you reach a freeboring between 1 and 2mm. You’ll obtain maximum precision inside this range. It is possible to modify the distance between the two O-rings, as long as they stay inside the collet.
Hasler ogives offer low bore fiction and, as a consequence, lower counter-pressure. That’s why they’ll require a little more lively powders to reach the right pressure needed for the perfect combustion of the powder itself.
