Magic Bore-reinigingsstok
≈ 107 €
Prijs bij de Dealer: 799 kr. Omgerekend tegen de ECB-koers van 30 oktober 2026.
Vrij verkrijgbaar vanaf 18 jaar
1260 København K, Denemarken
0
ID: 11358844
Aankoop van buiten de EU: Het wapen gaat via een importeur in jouw land; de dealer zorgt voor de uitvoer.
Zo verloopt de aankoop uit Europa
Veilig kopen met Gunfinder
Onze AI-gestuurde identiteitsverificatie van verkopers maakt Gunfinder tot de veiligste marktplaats online.
Meer weten
Details
- Originele taal
- Engels
- Categorie
- Staat
- Nieuw
- Locatie
- 1260 København K, Denemarken
- Beschikbaarheid
- leverbaar
Actualiteit
Dit aanbod is gebaseerd op een aanbiedingssynchronisatie, waarbij de aanbiedingsgegevens vanuit een shop, handelaar of extern platform naar ons zijn overgedragen. Houd er rekening mee dat door mogelijke vertragingen bij de gegevensoverdracht tijdelijke prijsafwijkingen kunnen optreden.
- Bron
- Gameandgun
- Laatst bijgewerkt
- ongeveer 14 uur geleden
Beschrijving
Opmerking:
Het artikel bevindt zich in het buitenland. Houd er rekening mee dat hierdoor de leveringsvoorwaarden, verzendtijden en/of het aankoopproces kunnen verschillen.
The Hand Kit and the Drill Kit have been designed to work together to be the ultimate in shotgun barrel cleaning solutions. The Hand Kit is designed to be taken with you to a shoot and kept in the back of the car. It is recommended that you use the Hand Kit, every time after you have finished shooting.
The Drill Kit is designed to clean ONLY the first 2/3 of the barrels - down to the end of the forcing cones - and it is designed to remove any stubborn lead or plastic fouling that may have built up or for that first clean after using competitor products as your gun will NOT be clean. It is NOT meant to be used from the choke end or you will distort the brush and reduces it's effectiveness from the end that it is designed to clean. You will also need to use the Hand Kit to push the powder out from the remaining 1/3 of the barrels after using the Drill Kit.
The Hand Kit comprises of an ergonomic aluminium handle which is designed to fit snugly into a plastic tube. The plastic tube has an end cap and is designed to keep all dirty components contained. The Hand Kit comprises of 2 material covered rods and a specially designed extra long brush for optimal cleaning of the barrels with minimum effort. The brush and the 2 material covered rods are classed as consumable parts and are replaceable items. The handle has a push fit plastic bush on the end which protects the gun parts from the aluminium handle. The rods are 100% covered by material so that no metal parts can come into contact with the gun being cleaned. The brush has a unique plastic cap which is designed to stop metal contacting the gun and also enable semi-auto shotguns to be cleaned fully assembled without damaging the bolt face.
How to Use
Using one square of decent quality toilet paper, so it wont break up around the brush, fold it into 4 and push it into the breach to create a cup. Take the Magic Bore Bore cleaner and lift the flip top lid. Tip the bottle over the toilet tissue and place 3 or 4 drops onto the tissue. This will saturate the tissue and ensure that the whole barrel is coated all of the way down. A spray won't do this. It is died blue so that you can see if you have saturated the tissue and if you spill any so you can wipe it off any surface that it comes into contact with. Remove the Hand Kit from its tube and place the plastic tip on the end of the brush, in the centre of the tissue and push it through the barrel with the hand kit. If you do this over a bin the tissue will drop into the bin and does not need to be handled so you will stay clean. This is an optional stage but will prolong the life of both the brush and the material covered rods. Next pull the Hand Kit in and out of the barrel several times to remove the rest of the debris. If you do this fast enough it is possible to remove the plastic fouling. Make sure that the brush leaves the end of the barrels completely so that it can relax before reversing its direction this will prevent the brush deforming and prolong its life. Repeat this for the other barrel if using a double barreled gun. For improved plastic fouling removal hold the barrels at the muzzle end and insert the cleaning tool from this end first. This means that the brush is in the right area to remove the plastic residue. Now repeat the back or forth movements rapidly until all traces have been removed. Replace the Hand Kit in its tube. This clean is perfect for when you are shooting in the field or at a clay ground.
