AEA Challenger Pro 29.5''
1.050 €
Vrij verkrijgbaar vanaf 18 jaar
7665 AN Albergen, Nederland
0
ID: 10818671
Dit aanbod is momenteel niet leverbaar.
Aankoop van buiten de EU: Het wapen gaat via een importeur in jouw land; de dealer zorgt voor de uitvoer.
Zo verloopt de aankoop uit Europa
Veilig kopen met Gunfinder
Onze AI-gestuurde identiteitsverificatie van verkopers maakt Gunfinder tot de veiligste marktplaats online.
Meer weten
Details
- Categorie
- Staat
- Nieuw
- Locatie
- 🇳🇱 7665 AN Albergen, Nederland
- Beschikbaarheid
- niet leverbaar
Actualiteit
Dit aanbod is gebaseerd op een aanbiedingssynchronisatie, waarbij de aanbiedingsgegevens vanuit een shop, handelaar of extern platform naar ons zijn overgedragen. Houd er rekening mee dat door mogelijke vertragingen bij de gegevensoverdracht tijdelijke prijsafwijkingen kunnen optreden.
- Bron
- Metura Schietsport
- Laatst bijgewerkt
- ongeveer 15 uur geleden
Beschrijving
The AEA Challenger Pro 29.5’’ has no sights of its own, but it instead uses a two-part Weaver/Picatinny scope rail. That scope rail can be used to mount a rifle scope onto the air rifle that fits its accurate range. The 29.5’’ (750 mm) barrel comes equipped with a barrel shroud and uses the tensioned barrel system. This means the barrel has an exceptional stiffness, which results in less vibrations during a shot and greatly increases accuracy. The barrel shroud is kept in place with an end cap that’s screwed onto the M14 thread at the end of the barrel. You could still choose to mount a moderator onto the barrel by using a thread adapter.
This AEA Challenger Pro 29.5’’ uses a regulated system, which ensures consistent shot power for as long as the cylinder pressure is sufficient. The PCP cylinder has a capacity of 350 cc and a maximum fill pressure of 250 bar/3600 PSI. It’s mounted right below the barrel shroud and it has two pressure gauges. One of those is used for checking the remaining fill pressure in the PCP cylinder and the other is used for gauging the regulator pressure. The PCP rifle is available in several calibres and they each have their own magazine capacity. You’ll find a brief overview below:
• 5.5 mm / .22 – capacity of 12
• 6.35 mm / .25 – capacity of 10
• 7.62 mm / .30 – capacity of 9
• 9 mm / .35 – capacity of 8
The stock can be folded, so you can transport and store the slightly easier. It features an elevation adjustable cheek rest, so you can line your eyes up perfectly with a rifle scope. Additionally, the butt stock comes equipped with an extendable monopod. There’s a short Weaver/Picatinny accessory rail on the bottom of the AEA Challenger Pro 29.5’’ rifle’s fore-end, which can be used to mount it onto a shooting stick or to mount a bipod onto it. Using a bipod and the monopod at the same time will allow you to create a rather stable set-up for the air rifle, which will definitely have a positive impact on its accuracy.
Specificaties
Merk
AEA Airguns
Kaliber
5.5 mm / .22, 6.35 mm / .25, 7.62 mm / .30, 9 mm / .35
Krachtbron
Perslucht
Vuldruk (bar / psi)
250 / 3626
Gereguleerd
Ja
Spansysteem
Zijhevel
Magazijncapaciteit
8, 9, 10, 12
Looplengte (mm)
750
Totale lengte (mm)
980
Vizier
Geen vizierlijn
Inclusief richtkijker
Nee
Montagerail type
Dovetail (11 mm)
Kolf
Universeel
Kolf materiaal
Aluminium / Synthetisch
Extra's
2 magazijnen, Vulnippel
