Artemis P15 Power Regulator XL Plenum < 82
94,99 €
Vrij verkrijgbaar vanaf 18 jaar
7665 AN Albergen, Nederland
0
ID: 10813402
Aankoop van buiten de EU: Het wapen gaat via een importeur in jouw land; de dealer zorgt voor de uitvoer.
Zo verloopt de aankoop uit Europa
Veilig kopen met Gunfinder
Onze AI-gestuurde identiteitsverificatie van verkopers maakt Gunfinder tot de veiligste marktplaats online.
Meer weten
Details
- Categorie
- Staat
- Nieuw
- Locatie
- 🇳🇱 7665 AN Albergen, Nederland
- Beschikbaarheid
- leverbaar
Actualiteit
Dit aanbod is gebaseerd op een aanbiedingssynchronisatie, waarbij de aanbiedingsgegevens vanuit een shop, handelaar of extern platform naar ons zijn overgedragen. Houd er rekening mee dat door mogelijke vertragingen bij de gegevensoverdracht tijdelijke prijsafwijkingen kunnen optreden.
- Bron
- Metura Schietsport
- Laatst bijgewerkt
- ongeveer 9 uur geleden
Beschrijving
For the Artemis (Spa / SMK) P15 we have a high pressure regulator in combination with an extra large 12 CC plenum available to tune your rifle to the maximum performance. It is an one-on-one replacement, just unscrew the old regulator and replace it with our High Power Tuning set. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.
The benefits of the Huma-Air, Artemis P15 High Power tuning regulator are:
Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
The posibility to tune your rifle for maximum power due to the extra available volume
A higher output pressure range of 90-170 bar compared to the factory regulator
This set will allow you to use lower pressure for the same pellet speed
When you order your Huma-Air, Artemis P15 High Power tuning regulator you will receive:
Your regulator preset to your own wishes
A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
We will include a “Huma-Air regulated” breech sticker
Fitting instructions as pdf download
Huma-Air Quality Control
Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.
Pressure settings of the Huma-Air, Artemis P15 High Power tuning regulator
Your tuning regulator comes preset on the most common pressure setting. It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.
The output pressure range is adjustable from 90-170 bar.
Important note before ordering:
Artemis/Spa/Diana uses different ways of machining inside the pressure tube. To make sure we will sent you the correct model we need to know the position of the "step" inside the pressure tube as shown on the picture below. Size X can be smaller as 82 mm or larger as 82 mm.
Please select the correct model of your pressure tube in the drop down menu in the orderdfield.
