Huma-Air Edgun Leshiy 12 ft/lbs HFT Regulator Tuning Kit
95 €
Vrij verkrijgbaar vanaf 18 jaar
7665 AN Albergen, Nederland
0
ID: 10813347
Aankoop van buiten de EU: Het wapen gaat via een importeur in jouw land; de dealer zorgt voor de uitvoer.
Zo verloopt de aankoop uit Europa
Veilig kopen met Gunfinder
Onze AI-gestuurde identiteitsverificatie van verkopers maakt Gunfinder tot de veiligste marktplaats online.
Meer weten
Details
- Categorie
- Staat
- Nieuw
- Locatie
- 🇳🇱 7665 AN Albergen, Nederland
- Beschikbaarheid
- voorbestelbaar
Actualiteit
Dit aanbod is gebaseerd op een aanbiedingssynchronisatie, waarbij de aanbiedingsgegevens vanuit een shop, handelaar of extern platform naar ons zijn overgedragen. Houd er rekening mee dat door mogelijke vertragingen bij de gegevensoverdracht tijdelijke prijsafwijkingen kunnen optreden.
- Bron
- Metura Schietsport
- Laatst bijgewerkt
- ongeveer 20 uur geleden
Beschrijving
Made on special request for the HFT and UK shooters. Huma Air in close coöperation with Airborne Arms NZ, developed this tune kit for the Edgun Leshiy to convert your rifle into a 12 ft/lbs (16 Joule) HFT version with an enormous shotcount.
Our kit contains our micro regulator, a special plenum with a matching valve return spring, a power sleeve and a new, softer hammerspring.
The kit is specially designed for .177 but also works fine for .22 and it is capable of providing you a huge shotcount with the highest shot to shot consistency. (see the shotstrings in the pictures)
The benefits
Huge increase in shotcount.
Easy to adjust due to the pressure scale, you do not need to gues, or use a reg-tester to set the pressure.
This regulator comes in our special low pressure range of 60-120 bar.
Excellent consistency.
Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
Tested in .177 and .22. (no test data for .25 available yet).
(Maximum power for this model is tested @ 21 ft/lbs in .22).
When you order your EDgun Leshiy 12ft/lbs Tuning Kit you will receive:
Your regulator preset on to your own wishes.
A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
A delrin powersleave.
A new valve return spring.
A new hammer spring.
We will include a “Huma regulated” breech sticker.
If you want to do some more tuning; the regulator has a clear pressure scale so you can easily adjust it to your wishes.
These regulators are also vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.
Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Please note: Not every rifle is identical and you might try some different setups to get the best results. The shotstrings in the pictures are made by "Wingman" of Airborne Arms. He is a skilled tuner and spent a lot of time in finding the best performance for his Leshiy. He used a 300 bar fill pressure. (Please check your rifle's owner manual for your maximum fill pressure)
* Als u een custom setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
