Achtung: Je browser is verouderd. Daardoor werkt Gunfinder mogelijk niet overal goed. Update je browser zo snel mogelijk. Lees hier meer!

DAA Extra-Short Dillon Powder Bar

≈ 43 €
Prijs bij de Dealer: 39,90 CHF. Omgerekend tegen de ECB-koers van 16 oktober 2026.
Vrij verkrijgbaar vanaf 18 jaar
9200 Gossau SG, Zwitserland
1
ID: 10786121
Aankoop van buiten de EU: Het wapen gaat via een importeur in jouw land; de dealer zorgt voor de uitvoer. Zo verloopt de aankoop uit Europa
Veilig kopen met Gunfinder
Onze AI-gestuurde identiteitsverificatie van verkopers maakt Gunfinder tot de veiligste marktplaats online. Meer weten

Details

Originele taal
Duits
Categorie
Staat
Nieuw
Locatie
🇨🇭 9200 Gossau SG, Zwitserland
Beschikbaarheid
beperkt leverbaar

Actualiteit

Dit aanbod is gebaseerd op een aanbiedingssynchronisatie, waarbij de aanbiedingsgegevens vanuit een shop, handelaar of extern platform naar ons zijn overgedragen. Houd er rekening mee dat door mogelijke vertragingen bij de gegevensoverdracht tijdelijke prijsafwijkingen kunnen optreden.
Bron
Shop Indoorswiss
Laatst bijgewerkt
ongeveer 20 uur geleden

Beschrijving

Opmerking: Het artikel bevindt zich in het buitenland. Houd er rekening mee dat hierdoor de leveringsvoorwaarden, verzendtijden en/of het aankoopproces kunnen verschillen.
The DAA Extra-Short Dillon Powder Bar was developed to meet a specific need, created with the introduction of the Dillon XL750 press: In the 750, the Dillon Powder Measure is angled such that the powder bar must extend directly over station #4 in the toolhead, and it cannot be repositioned. This Is not an issue if you have a short die in that station. However, if you wish to run a powder check in station #3, and a bullet dropper in station #4, as many do, this creates a serious problem. The original Dillon Powder Bar is too long, and it will extend and impact the bullet dropper in station #4, preventing correct function.
In order to resolve this problem, we designed an innovative extra-short powder bar that shortens the extension range towards station #4 by a full 30mm (1.15”), resolving the issue. When fully extended, our charge bar stops short of contacting a Mr.Bulletfeeder Dropper or Mini Mr.BF tube assembly.
The charge capacity of the Extra-Short bar is approx.. 95% of the Original Dillon small charge bar.
This design does require the use of a 2.5mm Allen key (not included) to adjust the powder charge, and the Click-Adjustable screw has 12 clicks per rotation for precise charge setting.
Made from black anodized 6061 Aluminum.

Vergelijkbare aanbiedingen