-9 %

AREA 419 ZERO LOCKING DIE RING 7/8″ TURRET PACK (9 RINGEN + SLUITING)

~~264,90 €~~ 239,90 €

Vrij verkrijgbaar vanaf 18 jaar

50197 Zaragoza, Spanje

ID: 10731386

Aankoop van buiten de EU: Het wapen gaat via een importeur in jouw land; de dealer zorgt voor de uitvoer. Zo verloopt de aankoop uit Europa

Veilig kopen met Gunfinder

Onze AI-gestuurde identiteitsverificatie van verkopers maakt Gunfinder tot de veiligste marktplaats online. Meer weten

Over de verkoper

Shooting Zaragoza

Dealer

102.501 advertenties

Details

Originele taal

Spaans

Categorie

Staat

Nieuw

Locatie

🇪🇸 50197 Zaragoza, Spanje

Beschikbaarheid

leverbaar

Actualiteit

Dit aanbod is gebaseerd op een aanbiedingssynchronisatie, waarbij de aanbiedingsgegevens vanuit een shop, handelaar of extern platform naar ons zijn overgedragen. Houd er rekening mee dat door mogelijke vertragingen bij de gegevensoverdracht tijdelijke prijsafwijkingen kunnen optreden.

Bron: Shooting Zaragoza
Laatst bijgewerkt: ongeveer 16 uur geleden

Beschrijving

Opmerking: Het artikel bevindt zich in het buitenland. Houd er rekening mee dat hierdoor de leveringsvoorwaarden, verzendtijden en/of het aankoopproces kunnen verschillen.

All Multi-Packs include multiple rings (details below) and a die wrench. Finish on all multi-packs will be black nitride. Wrenches are aluminum, so the finish is a black hardcoat anodize. 7/8″ Multi-Pack includes (4) rings, all 7/8×14, and a wrench. 7/8″ Turret-Pack includes (9) rings, all 7/8×14, and a wrench. 1-1/4″ Multi-Pack includes (4) rings, all 1-1/4×12, and a wrench. Hybrid Multi-Pack includes (2) 7/8×14 rings, (2) 1-1/4×12 rings, and a wrench. Through the research and development process for the ZERO, it became a testing bed for MANY reloading products. We needed to isolate variables, and ensure we were testing the press and not just the dies/shellholders/etc. One of the major culprits we found for inconsistency was actually lock rings. MOST lock rings on the market are held into place by a set screw or they’re split/clamp style. We found these to be inconsistent by design, as they needed to secure themselves to the dies for constant removal/replacement in single-stage presses. So, we decided to make our own. Here’s where we landed: LARGE DIAMETER – more surface contact with the turret head means the ring will align with the press and force the die straight, instead of grabbing onto the die and aligning as it may. MORE THREAD ENGAGEMENT – the rings feature .350″ of thread engagement, which is 15-25% more than common die lock rings. This results in roughly a full thread of additional engagement, increasing the ability of the ring to square the die to the press. INTERNAL WRENCH ENGAGEMENT – with traditional rings, there is a flat or knurling on the outside, which requires you to get a wrench around the outside to tighten. On a multi-die head this requires you to get tools between dies and fight with the location – or you have to make the ring smaller which has real downsides. This ring is designed with internal wrench engagement, mitigating this issue altogether. PRECISION STAINLESS STEEL MANUFACTURING – The threads and bottom face of the ring are machined in a single operation, delivering square surfaces to align your die. We then leave the ring and threads hole and unobscured by splits and grub screws. All rings are made of 17-4PH stainless steel. Available in raw stainless or with a black nitride finish. Total thickness of rings is .500″ and outside diameter is 1.685″

Afdrukken

AREA 419 ZERO LOCKING DIE RING 7/8″ TURRET PACK (9 RINGEN + SLUITING)

Shooting Zaragoza

Details

Actualiteit

Beschrijving

Vergelijkbare aanbiedingen