Dit aanbod is gebaseerd op een aanbiedingssynchronisatie, waarbij de aanbiedingsgegevens vanuit een shop, handelaar of extern platform naar ons zijn overgedragen. Houd er rekening mee dat door mogelijke vertragingen bij de gegevensoverdracht tijdelijke prijsafwijkingen kunnen optreden.
Bron
Sportwaffen Selector
Laatst bijgewerkt
ongeveer 2 uur geleden
Beschrijving
Opmerking:
Het artikel bevindt zich in het buitenland. Houd er rekening mee dat hierdoor de leveringsvoorwaarden, verzendtijden en/of het aankoopproces kunnen verschillen.
The PRIMER-PRO by Double-Alpha is a unique new approach to handling primers, and the solution reloaders have been waiting for! As any reloader knows well, manually filling primer tubes can be the most time-consuming and aggravating step in the whole reloading process, and few good automated solutions exist. Until now! The PRIMER-PRO by Double-Alpha is an innovative patent-pending design which departs from the traditional vibratory bowl solution used by all other automated primer tube machines. The PRIMER-PRO uses a collator type solution where the primers are allowed to exit the bowl through 20 precisely formed channels, ONLY if they are orientated in the correct direction (Anvil side up). If they are Anvil down, they will not pass through the channel, and rather slide back into the bowl as their channel reaches the top of the rotation, to enter again later, correctly oriented. This rejection-type design makes it practically impossible for a primer to enter the output channel if incorrectly orientated, making this device extremely reliable. During development, we ran many successful tests in which 100 tubes were filled (10,000 primers fed) without a single up-side-down primer! As the primers slide down the covered output-chute, they pass through an optical sensor which counts them and stops the collator once 100 primers have been counted into the primer-tube. The electronic processor board also monitors the sensor and is programed to stop the collator if, for whatever reason, primers hang-up on the exit hole and stack up along the ramp. The collator will be stopped before the primers stack all the way up and jam the collator. In such a case, the LED will flash quickly to indicate there is a problem. Once cleared, pressing the start button again will allow the collator to run and the count will continue from where it was stopped. Or alternatively, a long press on the button will start the count a new. One of the most innovative design solutions of the PRIMER-PRO is the Output Actuator Arm, which is activated by a lever system off the Timing Disk at the bottom of the Collator Assembly. This Output Actuator Arm slides the primers from the bottom of the ramp slide, moving them over to above the output hole, holding them there for a split second to ensure they are static, horizontal and stable, and then retracting to allow the primer to fall cleanly down into the awaiting primer tube. This dynamic solution for the exit hole greatly reduces the chance of primers hanging up while exiting into the tube, a problem common with other automated primer fillers. The PRIMER-PRO is currently available only for Smaller Primers, and handles Small-Rifle or Small-Pistol Primers equally well. A Large primer version may be offered in the future. One Magnetic Collar for a Dillon Primer Tube is included with the unit. A PRIMER TUBE IS NOT INCLUDED! Since the PRIMER-PRO can refill a single Primer Tube faster than you can use the previous 100 primers in any reloading press, only one tube is strictly necessary. However additional Magnetic Collars can be purchased separately, for those who prefer to fill multiple tubes before starting their reloading session. The unit is powder by a 12v DC power supply (dual voltage, 110-230), which ships including a suitable European and US prong set (included). The power cord is 2 meters (6ft) long, and includes an ON/OFF switch in the cable. NOTE: Primer tube not included.
Met jouw toestemming herkennen we je browser bij je volgende bezoek en zien we wat jagers en schutters echt zoeken. Zo maken we zoeken en aanbod elke dag een stukje beter en laten we je meer zien van wat jou interesseert. Je gegevens blijven bij ons: we delen ze niet en verkopen ze niet.
Je kunt je keuze op elk moment wijzigen via de link Cookie-instellingen in de voettekst. Wat we daarbij opslaan, staat in de privacyverklaring.
Cookie-instellingen
Inloggen, verlanglijst, taal en beveiligingsfuncties. Ze zorgen ervoor dat Gunfinder voor jou werkt, en zijn daarom altijd actief.
Als je akkoord gaat, herkennen we je browser bij je volgende bezoek en begrijpen we zo beter wat jagers en schutters echt zoeken. Dat helpt ons om de zoekfunctie en het aanbod elke dag een stukje beter te maken. Daarvoor slaan we een willekeurige identificatiecode op je apparaat op, twee jaar geldig en zonder persoonsgegevens. Zonder toestemming tellen we alleen anoniem. Of je profiel ook mag meebepalen wat je ziet, kies je met de volgende schakelaar.
Als je akkoord gaat, gebruiken we je profiel om je op Gunfinder aanbiedingen en inhoud te tonen die aansluiten bij je interesses: meer van wat je echt interesseert, minder willekeurige content. Er wordt hierdoor niets verborgen. Dit vereist toestemming voor statistieken, want zonder die toestemming is er geen profiel. Als steekproef zien een klein aantal mensen die akkoord zijn gegaan willekeurig de niet-gepersonaliseerde weergave. Je profiel blijft bij ons.
Cookies zijn uitgeschakeld
Jouw browser staat geen cookies toe. We kunnen je keuze daarom niet opslaan en vragen er ook niet naar — er draait alleen wat nodig is voor de werking van de site. Functies zoals inloggen of verlanglijstje hebben echter cookies nodig en blijven daarom uitgeschakeld.