STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 1 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 2 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 3 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 4 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 5 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 6 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 7 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 8 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 9 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 10 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 11 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 12 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 13 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 14 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 15 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 16 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 17 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 18 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp, afbeelding 19 van 21

STRIKE INDUSTRIES Glock 19 GEN5 Mass Driver Comp

139,90 €

Vrij te koop (vanaf 18 jaar)

8700 Leoben, Oostenrijk

ID: 10084911

Veilig kopen met Gunfinder

Onze AI-gestuurde identiteitsverificatie van verkopers maakt Gunfinder tot de veiligste marktplaats online. Meer weten

Over de verkoper

Earms

Dealer

3.748 advertenties

Details

Originele taal

Duits

Merk

Glock

Product

Glock 19

Categorie

Staat

Nieuw

Locatie

🇦🇹 8700 Leoben, Oostenrijk

Beschikbaarheid

onbekende levertijd

Actualiteit

Dit aanbod is gebaseerd op een aanbiedingssynchronisatie, waarbij de aanbiedingsgegevens vanuit een shop, handelaar of extern platform naar ons zijn overgedragen. Houd er rekening mee dat door mogelijke vertragingen bij de gegevensoverdracht tijdelijke prijsafwijkingen kunnen optreden.

Bron: Earms
Laatst bijgewerkt: ongeveer 7 uur geleden

Beschrijving

Opmerking: Het artikel bevindt zich in het buitenland. Houd er rekening mee dat hierdoor de leveringsvoorwaarden, verzendtijden en/of het aankoopproces kunnen verschillen.

The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide. Threaded Barrels: Yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. We've tested with majority of the popular brands on the market but not all. However we recommend use with non-threaded barrels if possible. COMPATIBILITY: GLOCK™ 19 GEN5 / 19X Holsters: SI Mass Driver Comp sits flush with OEM GLOCK™ slides and can be used in most open-ended holsters that accommodate compensators NOTE:-Recommended torque value for guide rod nut is 25 lbs/in.-Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failureDesigned for and tested on OEM GLOCK™ factory and Strike Industries slides-SI cannot guarantee proper fitment and application on third party slides and frames-Recommended torque value for guide rod nut is 25 lbs/in.-Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure-Loctite® Threadlocker Blue 242® on all threads-Gunsmith or armorer installation recommended-Product tested with factory GLOCK™ components-Performance may vary when using third party compatible GLOCK™ components-Consult with a local gunsmith for any custom modification while use with this product Package Contents: -x1 Comp main body-x1 Recoil spring-x1 Guide rod-x1 Guide rod fitment washer-x1 Guide rod head-x1 Internal spring-x1 Guide rod plug (GEN4 only)-x1 Warning card Product Features: -No threaded barrel needed (but can be used)-Eliminates the need for threaded barrels. 50 State Legal-Widened bore to reduce baffle strikes and keyholing rounds-2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide-No permanent modification of weapon required-Blended, no snag profile-Matches with width of the slide, it can be used with open holsters, no special holster needed-Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil-Contours with slide dimensions to be compatible with most open-bottom holsters-Precision CNC machined Threaded Barrels: We recommend use with non-threaded barrels if possible but yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. We've tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies.MONTAGEVIDEOPRODUKTVIDEO -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.--“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Afdrukken