DAA IDPA PDR Pro II étui
69 €
Catégorie d'arme D
5066 BB Moergestel, Pays-Bas
0
ID: 10813789
Achat hors UE : l’arme passe par un importateur dans ton pays, le marchand s’occupe de l’exportation.
Voici comment se déroule l’achat depuis l’Europe
Achète en toute sécurité avec Gunfinder
Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne.
En savoir plus
Détails
- Langue originale
- Néerlandais
- Catégorie
- État
- Neuf
- Localisation
- 🇳🇱 5066 BB Moergestel, Pays-Bas
- Disponibilité
- disponible
Actualité
Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.
- Source
- Mh Schietsport
- Dernière mise à jour
- il y a environ 23 heures
Description
Remarque :
L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.
The PDR-PRO-II holster body does not include the Suede lining that the PDR offers, making it more suitable for competition use, where speed and ease of draw are paramount. Attaching this PDR-PRO-II body to our Belt-Ride Ambidextrous Hanger, makes this holster a perfect choice for IDPA competitors or for general carry and range use.
The bare Kydex cannot be beaten for speed, quick release and smooth draw. Tension adjustment is done by turning one, or both Phillips head screws, which are accessible from the outside of the holster body, while worn.
This hanger positions the holster body up close against the body and provides you a solid, yet tilt adjustable holster mount. It can be used with 1.5-2” wide belts and is fully ambidextrous, working equally well for RH or LH holsters. If you are using the belt spacers (most will, as most use a 1.5” belt) you can choose to have those spacers both above, below, or one above and one below the belt as you thread it through. This will provide you some height adjustment.
Available for right or left handed shooters, in Black only.
The IDPA PDR PRO-II holster incorporates our latest generation Kydex holster body, as used in the popular PDR PRO-II holster. It is an efficient, fast holster body, available for many popular gun types for both right and left handed shooters.
The PDR-PRO-II holster body does not include the Suede lining that the PDR offers, making it more suitable for competition use, where speed and ease of draw are paramount. Attaching this PDR-PRO-II body to our Belt-Ride Ambidextrous Hanger, makes this holster a perfect choice for IDPA competitors or for general carry and range use.
The bare Kydex cannot be beaten for speed, quick release and smooth draw. Tension adjustment is done by turning one, or both Phillips head screws, which are accessible from the outside of the holster body, while worn.
This hanger positions the holster body up close against the body and provides you a solid, yet tilt adjustable holster mount. It can be used with 1.5-2” wide belts and is fully ambidextrous, working equally well for RH or LH holsters. If you are using the belt spacers (most will, as most use a 1.5” belt) you can choose to have those spacers both above, below, or one above and one below the belt as you thread it through. This will provide you some height adjustment.
Available for right or left handed shooters, in Black only.
IDPA PDR PRO-II holster van Double Alpha is een efficient en snel Kydex holster voor diverse pistolen, links- en rechtshandige versie verkrijgbaar. Dit IDPA holster heeft niet de suede bekleding zoals bij de duurdere PDR Pro-II waardoor hij goedkoper te fabriceren is maar ook meer geschikt voor competitie waar de snelheid en het gemak waarmee je het pistool kunt trekken van wezenlijk belang is. Door 2 schroeven is zelf de spanning te bepalen waarmee het wapen in het holster geklemd wordt. De hoek van het holster is ook te veranderen en hij is geschikt voor riemen van 40 en 50mm breedte. Alleen verkrijgbaar in zwart.
With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.
We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.
The first area of focus and improvement was the rail, the part which joins the belt hanger ball joint and the holster body.
We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.
The new rail attaches to the holster body more parallel to the gun’s slide, which increases the usable range of adjustment in the ball joint, allowing you to bring the gun much closer to the body than with the previous rail design.
The holster body itself has undergone several improvements as well. The high inner flap which previously covered most guns’ safeties has been lowered, allowing you to obtain a more complete in-the-holster shooting-grip. The material has been made slightly thinner to improve precision fit and retention of the pistol, and the tension spacers have been modified and improved. The cutout in the front of the holster has been lowered further, to facilitate faster holster clearance.
And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.
Available only in Black, for right-handed or left-handed shooters.
