Achtung: Ton navigateur est obsolète. Attention, Gunfinder risque donc de ne pas fonctionner partout. Mets-le à jour dès que possible. En savoir plus !

Huma-Air régulateur PCP en ligne réglable de l’extérieur avec kit de remplissage intégré

189 €
Catégorie d'arme D
7665 AN Albergen, Pays-Bas
0
ID: 10813417
Achat hors UE : l’arme passe par un importateur dans ton pays, le marchand s’occupe de l’exportation. Voici comment se déroule l’achat depuis l’Europe
Achète en toute sécurité avec Gunfinder
Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne. En savoir plus
À propos du vendeur
Metura Schietsport
Marchand

Détails

Langue originale
Néerlandais
Catégorie
État
Neuf
Localisation
🇳🇱 7665 AN Albergen, Pays-Bas
Disponibilité
en précommande

Actualité

Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.
Source
Metura Schietsport
Dernière mise à jour
il y a environ 17 heures

Description

Remarque : L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.
Externally adjustable inline PCP regulator with integrated fillset
This ultra compact external regulator is specialy designed for airgun shooting is can be screwed on to a 200/300 bar scuba tank with DIN connection. The regulator will reduce the outgoing pressure according to your settings so you can optimize the working pressure matching your airrifle. This will result in a constant pelletspeed and better groups. The regulator is equipped with a pressure gauge what will indicate the set pressure and a bleedscrew so it can fully function as a fillset.
The outgoing pressure range can be stepless set from the outside, withing the pressure ranges below, by turning the bronze ring.

70-125 bar
100-200 bar
180-250 bar

Within these settings the regulator can be set stepless in pressure. The standard setting is in the pressure range of 100-200 bar.
Because of the de-pressurize screw and manometer the regulator can also be used as a stand alone fillset. You will need a fill hose with 300 bar DIN connection to attach to the regulator (not included). If you already have a fillset with 300 bar din connection it can be screwed into the regulator.

* Please read the manual carefully before operating the External adjustable inline regulator. U can find the manual at the bottom of this page.
* Leest u a.u.b. eerst aandachtig de handleiding door voordat u aan het werk gaat met de regulator. Deze vind u onderaan de pagina.

Offres similaires