Huma-Air Air Arms S200 régulateur externe de réglage
97,50 €
Catégorie d'arme D
7665 AN Albergen, Pays-Bas
0
ID: 10813019
Achat hors UE : l’arme passe par un importateur dans ton pays, le marchand s’occupe de l’exportation.
Voici comment se déroule l’achat depuis l’Europe
Achète en toute sécurité avec Gunfinder
Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne.
En savoir plus
Détails
- Langue originale
- Néerlandais
- Catégorie
- État
- Neuf
- Localisation
- 🇳🇱 7665 AN Albergen, Pays-Bas
- Disponibilité
- disponible
Actualité
Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.
- Source
- Metura Schietsport
- Dernière mise à jour
- il y a environ 23 heures
Description
Remarque :
L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.
The Huma-Air regulator will regulate the airpressure in your S200 airgun. It reduces the primary high fill pressure in the cylinder into a lower pre-set working pressure. This will give you a constant pelletspeed and a higher accuracy; no more compensation on the (H)FT lane! The installation of the S200 regulator is very simple. Unscrew your air cylinder, screw the regulator between firing valve body and pressure tube and you are ready*
It is vented to the atmosphere, so no creeping up in power during time, without the need of a breath hole in the cylinder.
A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.
The benefits of this Air Arms S200 tuning regulator over other regulators currently on the market
The regulator housing is made of extremely tough 42Cr steel
Tested for a working pressure of at least 3x the working pressure of the rifle, for everyone’s safety
A constant pellet speed over the full working pressure range
Because the regbody comes between tube and valve you will get 45 mm. extra airvolume
The regulator body and the housing are one piece, so no chance of the regulator moving inside the cylinder
The one piece body and regulator housing also reduces the possibility of leaks
DIY fitting is a real option for the most people
High quality bluing in the same matte color as the original pressure tube
Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
It will give you a better shotcount and a full flat shotstring immediately
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Pressure settings of the Air Arms S200 regulator
The S200 regulator comes preset at the most common pressure setting, or we will adjust it according to your personal wishes. The pressure range is adjustable from 70-150 bar. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes. After fitting the regulator, always check the powersetting of the rifle and finetune it when needed to stay within legal limits.
Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen.
