Achtung: Ton navigateur est obsolète. Attention, Gunfinder risque donc de ne pas fonctionner partout. Mets-le à jour dès que possible. En savoir plus !
Gunfinder is also available in other languages.

DAA XL650 Primer Output Tube Assembly

≈ 23 €
Prix chez le marchand: 21 CHF. Converti au taux de la BCE du 13 octobre 2026.
Catégorie d'arme D
5036 Oberentfelden, Suisse
0
ID: 10552094
Achat hors UE : l’arme passe par un importateur dans ton pays, le marchand s’occupe de l’exportation. Voici comment se déroule l’achat depuis l’Europe
Achète en toute sécurité avec Gunfinder
Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne. En savoir plus
À propos du vendeur
Shooting Store
Marchand

Détails

Langue originale
Allemand
Catégorie
État
Neuf
Localisation
🇨🇭 5036 Oberentfelden, Suisse
Disponibilité
en précommande

Actualité

Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.
Source
Shooting Store
Dernière mise à jour
il y a environ 16 heures

Description

Remarque : L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.
If you load on an XL650 you have probably encountered the annoyance of spent primers bouncing off the Spent Primer Cup and ending up on your reloading bench or floor. The DAA XL650 Primer Output Tube Assembly puts an end to that problem by attaching directly over the spent primer exit window, and ensuring that spent primers have only one place to go – down the tube! The assembly is supplied with a 120cm (4ft) long PVC flexible tube, which will allow you to collect your primers in a container or bottle resting on the floor or attached anywhere under your press. he assemble includes:- A 120cm (4ft) long PVC flexible tube- A Delrin machined adaptor plate to fit to your XL650- Two longer 8-32 screws to replace the original ones on your Dillon Assembly Instructions:1. Remove your spent primer cup (part 16211) and spent primer cup bracket (part 16209) by unscrewing the two primer cup bracket screws (part 14689)2. Detach the PVC pipe from the adaptor. This makes it easier to assemble the adaptor. Pull the pipe firmly to detach3. Using the provided longer screws, attached the Delrin adaptor plate to the same mounting holes just vacated. Note that the part is directional – hold it so that the output hole lines up correctly with the exit window of the primers (the pipe mounting point will be on the side closest to you)4. Reattach the PVC pipe, and run it down to a collecting container. You can consider drilling a hole through your workbench to run the pipe vertically down This assembly is designed to fit current XL650 models. It will not fit units made prior to 1997. (if your 650 has the blue plastic Spent Primer Cup – it is current and will fit)

Ça pourrait aussi t'intéresser

Meilleures enchères

Offres sponsorisées