JP ENTERPRISES 9mm AR GLOCK® EnhancedBolt™ Assembly SS QPQ avec 9mm SCS

569 €

8700 Leoben, Autriche

ID: 10096067

Cette offre n'est actuellement pas disponible.

Achète en toute sécurité avec Gunfinder

Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne. En savoir plus

À propos du vendeur

Earms

Marchand

3 748 annonces

Détails

Langue originale

Allemand

Marque

Glock

Catégorie

État

Neuf

Localisation

🇦🇹 8700 Leoben, Autriche

Disponibilité

indisponible

Actualité

Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.

Source: Earms
Dernière mise à jour: il y a environ 8 heures

Description

Remarque : L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.

JP Enhanced 9mm AR Bolt Machined to the same exacting tolerances as our bolt carriers, this second generation 9mm bolt assembly is an entirely new design that eliminates the need for a central mass (slug) to readily function with our 9mm JP Silent Captured Spring without compromising bolt weight and reliability. In fact, when combined with our JP Silent Captured Spring, you have the heaviest, most reliable 9mm operating system that dramatically reduces bolt bounce while improving accuracy. The complete JP 9mm operating system is slightly heavier than the complete RRA bolt and buffer, some of the bolt mass having been transferred to the SCS in our system. In addition to use with our full-stroke Silent Captured Spring, this revision is now compatible with our line of short-stroke Silent Captured Springs. This bolt assembly will provide reliable last-round lockback with any compatible receiver such as our GMR-15™. Features: Reduced stroke length for faster firing impulse Designed for optimal function with JP Silent Captured Springs for a heavier operating system that reduces bolt bounce while improving reliability and accuracy Tighter firing pin channel to reduce pin wear High-energy tumble process offers a finer cosmetic finish Silent Captured Spring Selection JPSCS2-9SS-5 - Short-stroke (5 steel) Compatibility The JP 9mm bolt assembly is not compatible with Colt SMG-style lowers and magazines. The bolt assembly is also compatible with our JP side-charging uppers. The Gen 2 9mm SCS requires an open channel in your 9mm bolt assembly for the guide rod to pass during fire. For most bolts, this will require you to remove the pinned-in central mass. To function with the SCS, this central mass must be removable, and the bolt must still be at its full length without it. MADE IN THE USA

Imprimer