KYNSHOT AR-10 Amortisseur Hydraulique Court de Recul

189,90 €

8700 Leoben, Autriche

ID: 10094154

Achète en toute sécurité avec Gunfinder

Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne. En savoir plus

À propos du vendeur

Earms

Marchand

3 748 annonces

Détails

Langue originale

Allemand

Catégorie

État

Neuf

Localisation

🇦🇹 8700 Leoben, Autriche

Disponibilité

délai de livraison inconnu

Actualité

Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.

Source: Earms
Dernière mise à jour: il y a environ 12 heures

Description

Remarque : L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.

The KynSHOT RB5004 “Shorty” Recoil Buffer is designed for AR-10 carbines with a collapsible stock and an AR-15 length (7.0") buffer tube which is common on many AR-10 applications. Designed for 7.62mm/.308 cal. AR style rifles with an M4 length buffer tube (which is 7” deep, and ¾” shorter than an Armalite AR-10 collapsible stock tube). This is a common factory stock arrangement on many factory .308 rifles such as DPMS, CMMG, D.A.R. and many others. The best reference is that it replaces factory buffers that are 2.5" in length. NOT Compatible Caliber: 9mm The RB5004 reduces felt recoil 20-30%, while largely eliminating muzzle flip. The improvement in weapon accuracy – specifically second and third shot accuracy – is even more noticeable as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier's rearward motion and to prevent bolt bounce as a new cartridge is chambered. BENEFITS Drop-In Replacement Reduce felt recoil Improve reliability Reduce bolt carrier speed Reduce wear on parts Reduce shock and vibration to optics Suppress bolt bounce Decrease sight movement Smoother operation Faster shot recovery time Military grade materials and manufacturing SPECIFICATIONS Weight: 3.8 Ounces. Length when Compressed: 2.5" and replaces buffers that are 2.5” long. Mil-Spec Hydraulic Fluids and Seals - Ambient operating temp certified for -30F - +150F DO NOT USE IN 9mm AR-15s. For 9mm AR15s use KynSHOT P/N RB5007, RB5015HD or RB5020SS. Designed for 7.62mm/.308 cal. AR style rifles with an M4 length buffer tube (which is 7” deep, and ¾” shorter than an Armalite AR-10 collapsible stock tube). This is a common factory stock arrangement on many factory .308 rifles such as DPMS, CMMG and many others. The best reference is that it replaces factory buffers that are 2.5" in length. Also works well with other calibers based on the .308 case such as the .338 Federal, .260 Remington and .243 Winchester if they have the M4 buffer tube. If you buy an aftermarket AR-15/M4 collapsible stock tube for your .308 AR, this is the buffer you will need. The Magpul UBR stock also uses an AR-15 carbine length stock tube and would also require this buffer if used on a .308 rifle. MADE IN THE USA

Imprimer