ALG DEFENSE AK Enhanced AKT-EL Lightning Bow Trigger, image 1 sur 5

ALG DEFENSE AK Enhanced AKT-EL Lightning Bow Trigger, image 2 sur 5

ALG DEFENSE AK Enhanced AKT-EL Lightning Bow Trigger, image 3 sur 5

ALG DEFENSE AK Enhanced AKT-EL Lightning Bow Trigger

195,90 €

8700 Leoben, Autriche

ID: 10093892

Cette offre n'est actuellement pas disponible.

Achète en toute sécurité avec Gunfinder

Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne. En savoir plus

À propos du vendeur

Earms

Marchand

3 748 annonces

Détails

Langue originale

Allemand

Catégorie

État

Neuf

Localisation

🇦🇹 8700 Leoben, Autriche

Disponibilité

indisponible

Actualité

Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.

Source: Earms
Dernière mise à jour: il y a environ 12 heures

Description

Remarque : L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.

The ALG AK Trigger Enhanced with Lightning Bow® (AKT-EL) is a single stage trigger designed for the AK47 and AK74 variant platforms. The AKT-EL features a smoother and shorter trigger pull than the stock trigger and is ideal for combat and home defense use. It is machined from gun quality alloy steel and has a corrosion resistant Manganese Phosphate finish. The AKT-EL features the Lightning Bow®, which produces a very comfortable feel to the user over the stock trigger, while enhancing trigger control. For OEMs and builders, the AKT-EL is proudly made in North Wales PA, USA, and lends three parts towards 922(r) Compliance. Specs: The ALG Defense AK series of triggers were designed to work with most AK variants without fitting. With AK variants that have a rivet for the rear of the trigger guard, commonly acting as an anti-slap feature, this rivet should be no greater than 0.062 inches tall. Our AK series of triggers are designed to work with rivets that are 0.062 inches in height or less. If this rivet is higher than 0.062 inches, the rivet will have to be shaved down to allow for more clearance. Having improper clearance can result in damage to the disconnector itself. Alternatively, if the user does not choose to modify the rivet, you can opt to modify the underside of the disconnector to increase the clearance between the bottom of the disconnector and the rivet in the receiver. It is not recommended to completely remove the tail of the disconnector as adverse issues may arise, such as trigger slap. Most users prefer to bevel (angle) the disconnector in the area that would contact the rivet. We recommend shaving down the rivet, not the disconnector tail. Notes: Please note, we do recommend having a qualified gunsmith install and perform all fitting of fire control groups. AK receivers and parts coming from a wide origin of manufacture vary, there is no agreed upon set specifications. As such, fitting may be required. Please note the rivet and/or disconnect will need the proper clearance as per the chart below, failure to have the correct clearance will cause damage. The AKT-EL is not compatible with the 12 Gauge and 308 / 7.62x54r variants. MADE IN THE USA

Imprimer