Achtung: Ton navigateur est obsolète. Attention, Gunfinder risque donc de ne pas fonctionner partout. Mets-le à jour dès que possible. En savoir plus !
Gunfinder is also available in other languages.

STRIKE INDUSTRIES R.E.X. RISER BLK

59,90 €
8700 Leoben, Autriche
0
ID: 10089736
Cette offre n'est actuellement pas disponible.
Achète en toute sécurité avec Gunfinder
Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne. En savoir plus
À propos du vendeur
Earms
Marchand

Détails

Langue originale
Allemand
Catégorie
État
Neuf
Localisation
🇦🇹 8700 Leoben, Autriche
Disponibilité
indisponible

Actualité

Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.
Source
Earms
Dernière mise à jour
il y a environ 11 heures

Description

Remarque : L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.
The R.E.X. Riser is a low profile, lightweight riser for AR platforms. Set at the ideal height for co-witnessing while using the SI Reflex Exoskeleton mount with either A2 height, or Sidewinder sights (without spacer), the R.E.X Riser is versatile and provides and solid mounting platform. While optimized for use with the R.E.X Mount, the universal Picatinny pattern can be used with many other optics that can be mounted on picatinny sections. Package include:- 1x Riser Base- 1x M5x30mm Cap Head Hex Screw- 2x 10x3x.48mm spring- 1x Clamp- 1x Spacer- 1x Riser rail- 4x M3x6mm button head hex screw Features:- Low profile rail riser- Lightweight, 2 0z total installed co-witness height.- Co-witness with A2 or Sidewinder Sight using R.EX Mount- 3 picatinny slot sections Instructions: -Use the included spacer in conjunction with R.E.X Mount for absolute co-witness with A2 height sights. -Use R.E.X Mount with no spacer to co-witness with Sidewinder Sights only. Note: Medium Strength Loctite Recommended (Included).Note: Uses a proprietary picatinny rail design. Will work for most mil-spec 1913 style rail attachments however. M3 Screw Torque Specs: Do not exceed 10 inch-lbs and only hand tighten by holding onto the short end of the allen key included. M5 Bolt Torque Limit= 25 inch lbs maximum with thread locker. Product Spec: - Weight: 2 oz- Heights: W/ Spacer- 0.630 inches. W/out Spacer 0.530 inches, Spacer height: 0.100 inches- R.E.X Exoskeleton will add 0.200 inches of height to either combination of the R.E.X Riser- Base: 6061-T6 Al, Requires 5 rail sections of space to properly mount.- Total Length of picatinny riser: 2.09 inches- Spacer: 6061-T6 Al- Clamp: Steel- Screw: Steel Finish:- TIII Hard anodize (BK)MADE IN THE USA

Ça pourrait aussi t'intéresser

Meilleures enchères

Offres sponsorisées