LANCER SYSTEMS 6.5 Creedmoor Viper Muzzle Brake 5/8-24 UNEF SS, image 1 sur 3

LANCER SYSTEMS 6.5 Creedmoor Viper Muzzle Brake 5/8-24 UNEF SS

229,90 €

8700 Leoben, Autriche

ID: 10089001

Cette offre n'est actuellement pas disponible.

Achète en toute sécurité avec Gunfinder

Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne. En savoir plus

À propos du vendeur

Earms

Marchand

3 748 annonces

Détails

Langue originale

Allemand

Catégorie

État

Neuf

Localisation

🇦🇹 8700 Leoben, Autriche

Disponibilité

indisponible

Actualité

Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.

Source: Earms
Dernière mise à jour: il y a environ 12 heures

Description

Remarque : L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.

The Lancer Viper Brake is a tuneable muzzle brake and compensator designed for precision shooters. Engineered with a blast chamber and four tuneable jets, the Viper muzzle brake effectively reduces barrel movement and felt recoil, making for faster follow on shots and a more accurate shooting experience. Features: Angled blast baffles reduce recoil and stabilize the rifle Four jet locations on the top of the brake redirect gas pressure from the blast chamber creating a downward force on the muzzle Different size jets are supplied so the operator can tune the desired amount downward compensation Includes: Locking jam nut Wrench Adjustable tuning jets Specs: For caliber 6.5 Creedmoor Made from Stainless Steel Finish: Polished Length: 3.75″ Width: 1.87″ (at the widest point) Height: 1.05″ Weight: 0.75 lbs Tuning Procedure: The objective when tuning your Viper is to minimize muzzle movement when shooting rapid strings of fire from an offhand position. Do not attempt to tune your muzzle brake compensator from a bench or from a supported position. Do not adjust or replace the compensator jets without first checking to make sure that the firearm has been cleared of all ammunition. To begin tuning, set up at close range of 25-50 yards from a paper target. Fire a rapid group of 3-5 rounds. If the group patterns in an upwards direction, increase the amount of gas being ported through the jets by replacing one or both with a larger orifice size. If the group strings down, decrease the gas being ported upwards be replacing one or both of the jets with a smaller orifice. Torque both jets to 8-10 in/lbs and fire the shot string again. Repeat this process until your group stops stringing up or down and holds at the same level of elevation. Overall group size should improve markedly when rapidly shooting offhand with a properly tuned Viper installed. MADE IN THE USA

Imprimer