LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, image 1 sur 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, image 2 sur 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, image 3 sur 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, image 4 sur 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, image 5 sur 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, image 6 sur 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC

189,90 €

8700 Leoben, Autriche

ID: 10088980

Cette offre n'est actuellement pas disponible.

Achète en toute sécurité avec Gunfinder

Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne. En savoir plus

À propos du vendeur

Earms

Marchand

3 748 annonces

Détails

Langue originale

Allemand

Catégorie

État

Neuf

Localisation

🇦🇹 8700 Leoben, Autriche

Disponibilité

indisponible

Actualité

Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.

Source: Earms
Dernière mise à jour: il y a environ 18 heures

Description

Remarque : L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.

The Lancer Adaptive Magwell (LAM™) is a bolt-on upgrade for all milspec AR-15’s which increases the effective diameter of the magazine well, decreasing reload time and improving reliability under stressful or adverse conditions. LANCER LAM™ Magwell Features: One-piece aluminium construction Designed for milspec AR-15/M4/M16 rifles with standard forged lower receivers with removable trigger guards Compatibility: Works only with AR-15/M4/M16 Forged Lower Receiver manufactured according to Mil-Spec diameter with removable trigger guards Works with most standard AR-15/M4/M16 USGI pattern magazines NOT compatibel with Billet Lower Receiver NOT compatibel with S&W Lower Receiver Specs: Forged Magazine Well Extension, precision machined from 6061-T6 aluminum Finish: Mil-Spec Type III black Includes: Rubber gaskets for a snug rattle-free fit Informations: Compatible Lower Receiver see under this article, accessories INSTALLATION INSTRUCTIONS 1. Remove spring pin (or roll pin) from the front of the trigger guard where it connects the existing magwell. 2. Swing the trigger guard down so that you have approximately 1/2″ of clearance below the magwell. 3. Slide the Lancer Adaptive Magwell (LAM) over the lower lip of the receiver until it stops, making sure that the rubber gasket is properly seated down in the front pocket of the LAM. (NOTE: The one-piece LAM comes with two styles of rubber gasket. You may want to test fit the magwell with both to determine which gasket style will work best for your particular receiver.) 4. Using a small screwdriver or the tip of a dummy round, depress the spring-loaded pin on the LAM and slide it the rest of the way onto the receiver until the spring-pin pops into place in the trigger guard pin hole. 5. Re-install the front of the trigger guard into the mounting location on the LAM. 6. Check to make sure the LAM is secure and perform a basic function test on the rifle prior to live-fire use. MADE IN THE USA

Imprimer