Achtung: Ton navigateur est obsolète. Attention, Gunfinder risque donc de ne pas fonctionner partout. Mets-le à jour dès que possible. En savoir plus !
Gunfinder is also available in other languages.

MAGPUL MBUS 2 FRONT BACK-UP SIGHT NOIR

49,90 €
4240 Freistadt, Autriche
0
ID: 10088112
Achète en toute sécurité avec Gunfinder
Notre vérification d'identité basée sur l'IA fait de Gunfinder la place de marché la plus sûre en ligne. En savoir plus
À propos du vendeur
Shootingstore
Marchand

Détails

Langue originale
Allemand
Catégorie
État
Neuf
Localisation
🇦🇹 4240 Freistadt, Autriche
Disponibilité
disponibilité limitée

Actualité

Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.
Source
Shootingstore
Dernière mise à jour
il y a environ 17 heures

Description

Remarque : L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.
MAGPUL MBUS 2 FRONT BACK-UP SIGHT BLACK 

The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform.

FEATURES:

Impact resistant polymer construction provides light weight and resists operational abuse

Spring-loaded flip up sight easily activated from either side or by pressing the top

Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.

Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* and provides the same height-over-bore as standard A2 irons

Protective wings shield the spring-locking A2 front sight post

Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well

SPECIFICATIONS:

MBUS – Front

Weight, w/ hardware: 1.2 oz.

Height above rail, stowed: ~0.51 in.

Length, stowed: 2.6 in.

Length, deployed: 1.5 in.

ELEVATION ADJUSTMENT:

~1.6 MOA (1.886"/100m) per click with a 14.5" sight radius

~1.2 MOA (1.367"/100m) per click with a 20" sight radius

NOTE:
Cannot be mounted to a railed gas block due to excess heat issues.
Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail.
Because of this the sight is also not compatible with MOE Hand Guards.

Ça pourrait aussi t'intéresser

Meilleures enchères

Offres sponsorisées