Achtung:
Ton navigateur est obsolète. Attention, Gunfinder risque donc de ne pas fonctionner partout. Mets-le à jour dès que possible. En savoir plus !
Cette offre est basée sur une synchronisation d'annonce, par laquelle les données de l'offre ont été transmises depuis une boutique, un marchand ou une place de marché externe. Merci de noter que des écarts de prix temporaires peuvent survenir en raison de délais éventuels lors de la transmission des données.
Source
Earms
Dernière mise à jour
il y a environ 8 heures
Description
Remarque :
L'article est situé à l'étranger. Note que les conditions de livraison, les délais d'expédition et/ou la procédure d'achat peuvent varier.
The 4mm is our mid profile extension for the Staccato/Infinity/Springfield Prodigy/Atlas/Infinity 9/38 2011 style magazine. Although it will work on all 2011 style magazines, it is recommended for the 140mm magazine. It brings the capacity up from 20 rounds to 22 rounds with the factory spring and follower and still fits the USPSA 140mm gauge. If you want even more added capacity use our thin competition follower and extra power 11 coil spring to bump the capacity up to 23 rounds (but will not lock the slide to the rear on the last round fired). The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw. * Magazine NOT included * For the Infinity Magazines: Our base pads will fit all the Infinity magazines and every generation. 9mm/38 – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 23+1 capacity. For Unlimited Division, we recommend the 170mm, the same 3mm extension must be used with our thin competition follower and 13 coil extra power spring to get 29+1 rounds and still fit the USPSA 170mm Gauge. Using a 140mm Magazine with our 7mm extension and our thin competition follower and 11 coil extra power spring will bump the capacity to 24+1. Recommended for the Unlimited Division. If you’re not buying any of this for competition, you can mix and match any of these magazines and pads for different endless combinations. .40SW – Recommendations for competition magazine guidelines: You must use the 3mm extension with your 140mm magazine tubes in order to fit the 140mm gauge. Using our thin competition follower and 11 coil extra power spring you’ll get 21+1 capacity. For the .40 Magazines: Staccato Magazines: without changing the spring and follower using our 4mm base pad will bump the capacity from 18 to 20 rounds and fit the 140mm USPSA gauge for limited. With our thin competition follower and 11 coil extra power spring it will hold 21 rounds. (but will not lock the slide to the rear on the last round fired Infinity: 140mm .40SW Magazines, the 3mm base pad and our thin competition follower and 11 coil extra power spring it will hold 21 rounds and still fit the 140mm gauge for USPSA/limited division. (but will not lock the slide to the rear on the last round fired Atlas Magazines: Using our 4mm base pad will allow the magazine to hold 18 rounds with the factory spring and follower. With our thin competition follower and 11 coil extra power spring it will bump the capacity from 18 rounds to 20 rounds. (but will not lock the slide to the rear on the last round fired). NOTE *Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.*MADE IN THE USA
Avec ton accord, nous reconnaissons ton navigateur lors de ta prochaine visite et voyons ce que les chasseurs et les tireurs recherchent vraiment. Ainsi, nous améliorons chaque jour la recherche et l'offre, et te montrons davantage de ce qui t'intéresse. Tes données restent chez nous : nous ne les partageons pas et ne les vendons pas.
Tu peux modifier ton choix à tout moment via le lien Paramètres des cookies en bas de page. Ce que nous enregistrons est détaillé dans la politique de confidentialité.
Paramètres des cookies
Connexion, liste de favoris, langue et fonctions de sécurité. Ils permettent à Gunfinder de fonctionner pour toi et sont donc toujours actifs.
Si tu acceptes, nous reconnaîtrons ton navigateur lors de ta prochaine visite et comprendrons ainsi ce que chasseurs et tireurs recherchent vraiment. Cela nous aide à améliorer chaque jour un peu plus la recherche et l'offre. Pour cela, nous enregistrons un identifiant aléatoire sur ton appareil, valable deux ans et sans aucune donnée personnelle. Sans ton accord, nous ne comptons que de façon anonyme. C'est le commutateur suivant qui te permet de décider si ton profil peut également influencer ce que tu vois.
Si tu acceptes, nous utilisons ton profil pour te montrer sur Gunfinder des offres et des contenus qui correspondent à tes intérêts : plus de ce qui t'intéresse vraiment, moins d'éléments sans rapport. Rien n'est masqué pour autant. Cela nécessite ton consentement aux statistiques, car sans lui, il n'y a pas de profil. À des fins de contrôle, quelques utilisateurs ayant donné leur accord voient aléatoirement la version non personnalisée. Ton profil reste chez nous.
Les cookies sont désactivés
Ton navigateur n'autorise pas les cookies. Nous ne pouvons donc pas enregistrer ton choix et ne te le demanderons pas — seul le strict nécessaire au fonctionnement du site est actif. Des fonctions comme la connexion ou la liste de favoris ont besoin des cookies et resteront indisponibles tant que ceux-ci sont désactivés.