Empuñadura de pistola para escopeta tipo Beretta modelo 300 ga 12. Pintada e incluyendo almohadilla de retroceso en bakelita. Hecha en madera de nogal turco, secada al 16%. Agujero mm 270. La culata es recta y la caída vertical en el talón se realiza mediante la placa de metal. La culata está disponible con una curvatura de 3,5 mm.
Dado que la madera es un material vivo y está sujeta a ligeras deformaciones causadas por la humedad y el secado, es posible que se requieran ligeros ajustes en las partes en contacto con el armazón durante el revestimiento/montaje.
Los plazos de envío para este producto son generalmente de 7/10 días, a menos que el fabricante comunique lo contrario.
El envío se realiza por mensajería, para la cual se proporciona trazabilidad.
Se aceptan devoluciones de productos no utilizados e intactos, con una solicitud que debe hacerse dentro de los 3 días posteriores a la recepción; el envío de devolución es responsabilidad del comprador.
(Mostrar descripción en el idioma original)
Pistolengriffschaft für Jagdbüchse Beretta modell 300 lehre 12, gemalt und mit kappe darin bakelite. Begriffen in türkischem Walnuß-Baum, getrocknet zu 16 %. Loch Mm 270. Der schaft ist gerade und das schaftsenkung vertikal wird damit getan platte des metals. Vorhanden schränkung dessen 3,5.
Da Holz ein lebendiges Material ist und durch Feuchtigkeit und Austrocknung leichten Verformungen unterliegt, kann es vorkommen, dass beim Verkleiden/Montieren an den mit dem Basküle in Kontakt stehenden Teilen leichte Anpassungen erforderlich sind.
Die Lieferzeit für dieses Produkt beträgt normalerweise 7/10 Tage, sofern der Hersteller nichts anderes angibt.
Der Versand erfolgt mit einem Spediteur, dessen Sendungsverfolgung gewährleistet ist.
Die Rücksendung des unbenutzten und unversehrten Produkts wird akzeptiert, mit einer Anfrage innerhalb von 3 Tagen nach Erhalt; der Rückversand geht zu Lasten des Käufers.
Pistol stock for shotgun type Beretta model 300 ga 12. Varnished and including recoil pad in bakelite. Made in Walnut wood dried 16%. Hole mm 270. The stock is straight and the verticle drop at heel is made by the metal plate. The stock is available with curvature of 3,5 mm.
Since wood is a living material and subject to slight deformations caused by humidity and drying, it is possible that slight adjustments may be necessary on the parts in contact with the action frame during casing/assembly.
Shipping times for this product are generally 7/10 days, unless otherwise communicated by the manufacturer.
The shipment is made by courier for which traceability is provided.
Returns of unused and intact products are accepted, with a request to be made within 3 days of receipt; return shipping is the responsibility of the buyer.