CARICATORE – MDT – .308/6.5 Creedmoor | Metal AICS Magazine – 10 RND
≈ 665 kr
Pris hos forhandleren: 89 €. Omregnet efter ECB-kursen fra 2. november 2026.
Våbentilladelse påkrævet
67100 L'Aquila, Italien
3
ID: 9990609
Denne vare kan ikke leveres i øjeblikket.
Køb fra et land uden for EU: Våbnet går gennem en importør i dit land, og forhandleren sørger for eksporten.
Sådan foregår køb fra Europa
Køb sikkert med Gunfinder
Vores AI-baserede identitetskontrol af sælgerne gør Gunfinder til den sikreste markedsplads på nettet.
Læs mere
Detaljer
- Originalsprog
- Italiensk
- Kategori
- Stand
- Ny
- Placering
- 🇮🇹 67100 L'Aquila, Italien
- Tilgængelighed
- kan ikke leveres
Aktualitet
Dette tilbud er en kopi, hvor tilbudsdata er blevet overført til os fra en webshop, forhandler eller ekstern markedsplads. Bemærk, at eventuelle forsinkelser i dataoverførslen kan medføre midlertidige prisforskelle.
- Kilde
- Armeria Tomei
- Senest opdateret
- for cirka 18 timer siden
Beskrivelse
Bemærk:
Varen befinder sig i udlandet. Bemærk, at leveringsbetingelser, leveringstider og/eller købsproceduren derfor kan være anderledes.
SPECIFICATIONS
3.055” Outside Length
2.870” max cartridge overall length (COAL) with binder plate
2.960” max cartridge overall length (COAL) without binder plate (see limitations below)
3.90” Rear Height
MDT 10-round magazines are approximately ¾” shorter in height than standard AICS 10-round magazines due to MDT’s unique Double Stack to Single Feed (DSSF) transition design, allowing easier mag changes when shooting prone.
10-round magazine includes 2 internal ribs that help reduce friction between the cartridge and magazine body and provide a smooth transition from a double stack to single feed at the top of the magazine.
COMPATIBILITY
These magazines will need to be slightly modified to function with Howa 1500 SA rifles.
308WIN
6mm Creedmoor
243WIN
260 Rem
6.5 Creedmoor
7mm-08 Win
308/7.62×51 NATO
22 – 250 Rem (will work at a reduced capacity)
The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.
The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp.
