Kore - X6 taktisk bælte med spænde - Sort
≈ 743 kr
Pris hos forhandleren: 1.099 kr. Omregnet efter ECB-kursen fra 12. november 2026.
Ingen tilladelse påkrævet
254 64 Helsingborg, Sverige
1
ID: 11604499
Køb fra et land uden for EU: Våbnet går gennem en importør i dit land, og forhandleren sørger for eksporten.
Sådan foregår køb fra Europa
Køb sikkert med Gunfinder
Vores AI-baserede identitetskontrol af sælgerne gør Gunfinder til den sikreste markedsplads på nettet.
Læs mere
Detaljer
- Originalsprog
- Svensk
- Kategori
- Stand
- Ny
- Placering
- 🇸🇪 254 64 Helsingborg, Sverige
- Tilgængelighed
- kan leveres
Aktualitet
Dette tilbud er en kopi, hvor tilbudsdata er blevet overført til os fra en webshop, forhandler eller ekstern markedsplads. Bemærk, at eventuelle forsinkelser i dataoverførslen kan medføre midlertidige prisforskelle.
- Kilde
- RangeMaster Store
- Sidst tjekket hos forhandleren
- for 3 dage siden
Beskrivelse
Bemærk:
Varen befinder sig i udlandet. Bemærk, at leveringsbetingelser, leveringstider og/eller købsproceduren derfor kan være anderledes.
Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time.
Belt Width / Thickness: 1.5” / 5mm
Load Rating: Up to 10 lbs. / IWB, OWB or Appendix
Size Range: Fits 24" - 54"
Buckle Material/ Finish: Zinc Alloy / Powder-Coat
Buckle Size / Weight: 3” x 1.75” / 4.5 oz.
Adjustable Track: Provides Over 40 - ¼” Size Positions
Belt Reinforcement: Power-Core™ Center for Added Stiffness and Support; Virtually Indestructible
Belt Material: Nylon / Super Fiber Inner
Tip Keeper: Included with 1.5" Tactical Nylon Belts
To trim your 1.5" Gun Belt or 1.75" Garrison Gun Belt to size, follow the instructions below.
1. On the back of the belt, use the ruler markings to find your pant size.
2. Add 4 inches for OWB carry, or 6 inches for IWB carry to your pant size. Cut on the mark using a sharp pair of scissors.
For Example: If your pant size is 34" - cut the belt at the 38" mark for OWB carry, or 40" for IWB carry.
If your pant size is close to the maximum size marking DO NOT CUT. Try the belt on first, then trim accordingly.
3. Loosen the 2 set screws on the back of the buckle with included wrench. Insert the cut end of the belt into the receptacle with teeth.
4. Clamp teeth down firmly and gently tighten the 2 set screws on the back of the buckle until they sit flush. Use caution to ensure the set screws are not overtightened or stripped. DO NOT TIGHTEN SET SCREWS UNTIL THE TEETH ARE FULLY CLAMPED DOWN.
5. Feed belt around waist (L to R), through the buckle and click until snug.
The tip of the belt should extend around 3 inches beyond your first belt loop.
