Clawgear SG550 High Profile Mount Base Black
≈ 1.143 kr
Pris hos forhandleren: 140,60 CHF. Omregnet efter ECB-kursen fra 30. oktober 2026.
5036 Oberentfelden, Schweiz
2
ID: 10557935
Køb fra et land uden for EU: Våbnet går gennem en importør i dit land, og forhandleren sørger for eksporten.
Sådan foregår køb fra Europa
Køb sikkert med Gunfinder
Vores AI-baserede identitetskontrol af sælgerne gør Gunfinder til den sikreste markedsplads på nettet.
Læs mere
Detaljer
- Originalsprog
- Tysk
- Mærke
- Clawgear
- Kategori
- Stand
- Ny
- Placering
- 🇨🇭 5036 Oberentfelden, Schweiz
- Tilgængelighed
- kan forudbestilles
Aktualitet
Dette tilbud er en kopi, hvor tilbudsdata er blevet overført til os fra en webshop, forhandler eller ekstern markedsplads. Bemærk, at eventuelle forsinkelser i dataoverførslen kan medføre midlertidige prisforskelle.
- Kilde
- Shooting Store
- Senest opdateret
- for 2 dage siden
Beskrivelse
Bemærk:
Varen befinder sig i udlandet. Bemærk, at leveringsbetingelser, leveringstider og/eller købsproceduren derfor kan være anderledes.
NATO STANAG 4694 RAIL
The 13 slot Picatinny Rail allows the user to upgrade his 55X rifle with various aiming devices or accessories.
LIGHTWEIGHT CONSTRUCTION
Although this mount base has been designed in a lightweight way, its mechanical strength is not being affected.
ADJUSTMENT SCREW
It clamps the mount for a solid fit between both attachment points on the receiver and is secured by a clamp screw on the left side.
DOVETAIL SLOT
The front attachment point is the dovetail on the receiver which is normally used to fix the brass catcher.
AIMING BORE
Makes the use of the original diopter sights possible.
Compatibility
SIG550, SIG551, SIG552, SIG553, PE90 and all variants of the ri e with standard adjustable diopter sights.
Installation
Make sure your weapon is unloaded and safe. Screw the included adjustment screw fully into the mount base. Put the rail on the upper receiver and slide it forward so the dovetail on the receiver connects smoothly to the front of the rail. Then use a 8mm wrench to unscrew the adjustment screw until it moves inside the hole of the rear sight base. Tighten it up for a solid fit. Use the clamp screw on the left side of the mount base to secure its position.
