TR-1 FLAT Performance Trigger kit for Glock Gen 5
≈ 2.235 kr
Pris hos forhandleren: 299 €. Omregnet efter ECB-kursen fra 30. oktober 2026.
9300 Blintendorf, Østrig
5
ID: 10136230
Køb fra et land uden for EU: Våbnet går gennem en importør i dit land, og forhandleren sørger for eksporten.
Sådan foregår køb fra Europa
Køb sikkert med Gunfinder
Vores AI-baserede identitetskontrol af sælgerne gør Gunfinder til den sikreste markedsplads på nettet.
Læs mere
Detaljer
- Originalsprog
- Tysk
- Kategori
- Stand
- Ny
- Placering
- 🇦🇹 9300 Blintendorf, Østrig
- Tilgængelighed
- kan leveres
Aktualitet
Dette tilbud er en kopi, hvor tilbudsdata er blevet overført til os fra en webshop, forhandler eller ekstern markedsplads. Bemærk, at eventuelle forsinkelser i dataoverførslen kan medføre midlertidige prisforskelle.
- Kilde
- Shootingrange Blintendorf
- Senest opdateret
- for cirka 23 timer siden
Beskrivelse
Bemærk:
Varen befinder sig i udlandet. Bemærk, at leveringsbetingelser, leveringstider og/eller købsproceduren derfor kan være anderledes.
TECHNICAL SPECIFICATIONS
The TR-1® FLAT trigger is CNC-machined from aeronautical Ergal and finished with a scratch-resistant matt-black mil-spec coating. Built around improved Glock Performance components (trigger bar, extractor/ejector, connector), the kit yields an approximate release weight of ~1 kg* while preserving full reliability with original springs.
Trigger features:
Matt-black, scratch-resistant mil-spec finish.
Front memory point for repeatable distal-phalanx placement.
Lateral bevel for ergonomic seating and a smooth, linear pull.
Triangular rear corner to guide phalanx positioning.
TR-1 laser marking on the side.
Adjustable trigger-stop dowel at the base.
TR-1® FLAT Performance kit:
1 × Glock Performance extractor/ejector package
1 × CNC Ergal Flat trigger with trigger-stop adjustment screw
1 × Trigger bar, machined at dedicated angles and mirror-finished
2 × Connectors: 2.0 kg (“−”) and DOT 2.2 (“°”), machined and mirror-finished
1 × Self-lubricating firing-pin safety, optimized for smooth disengagement
1 × TR-1 lightened firing-pin safety spring
1 × TR-1 tool for mounting the trigger bar on the ejector
1 × TR-1 aluminum cover plate with laser engraving (NOT essential for trigger setup)
1 × Adjustment Allen key
Compatibility:
Compatible with Glock Gen-5 models in 9 mm and .40 S&W (e.g., G17 Gen5, G19 Gen5, G19X, G26 Gen5, G34 Gen5 MOS, G45 MOS, G47 MOS, G44, G22 Gen5, G23 Gen5, G27 Gen5).
