-86 %

STRIKE INDUSTRIES Picatinny Dual Folding Stock Brace, billede 1 af 9

STRIKE INDUSTRIES Picatinny Dual Folding Stock Brace, billede 2 af 9

STRIKE INDUSTRIES Picatinny Dual Folding Stock Brace, billede 3 af 9

STRIKE INDUSTRIES Picatinny Dual Folding Stock Brace, billede 4 af 9

STRIKE INDUSTRIES Picatinny Dual Folding Stock Brace, billede 5 af 9

STRIKE INDUSTRIES Picatinny Dual Folding Stock Brace, billede 6 af 9

STRIKE INDUSTRIES Picatinny Dual Folding Stock Brace, billede 7 af 9

STRIKE INDUSTRIES Picatinny Dual Folding Stock Brace

~~≈ 16.061 kr~~ ≈ 2.241 kr

Pris hos forhandleren: 299,90 €. Omregnet efter ECB-kursen fra 30. oktober 2026.

8700 Leoben, Østrig

ID: 10089858

Køb fra et land uden for EU: Våbnet går gennem en importør i dit land, og forhandleren sørger for eksporten. Sådan foregår køb fra Europa

Køb sikkert med Gunfinder

Vores AI-baserede identitetskontrol af sælgerne gør Gunfinder til den sikreste markedsplads på nettet. Læs mere

Om sælgeren

Earms

Forhandler

3.862 tilbud

Detaljer

Originalsprog

Tysk

Kategori

Stand

Placering

🇦🇹 8700 Leoben, Østrig

Tilgængelighed

ukendt leveringstid

Aktualitet

Dette tilbud er en kopi, hvor tilbudsdata er blevet overført til os fra en webshop, forhandler eller ekstern markedsplads. Bemærk, at eventuelle forsinkelser i dataoverførslen kan medføre midlertidige prisforskelle.

Kilde: Earms
Senest opdateret: for cirka 18 timer siden

Beskrivelse

Bemærk: Varen befinder sig i udlandet. Bemærk, at leveringsbetingelser, leveringstider og/eller købsproceduren derfor kan være anderledes.

The Strike Dual Folding Adapter is the first-in-market patented system that has an intuitive unfolding system for a Picatinny interface. The Strike Dual Folding Adapter folds left or right anytime without flipping or reconfiguring the hinge. At any moment, the user can fold to the desired left or right side. When moved into the folded position, there is a positive lock so the Strike Dual Folding Adapter remains folded. A simple pull up on the bar near the hinge and back for quick deployment when folded. A 3-degree down tilt angle is added to help prevent interference with the weapons ejection port when folded to the right side. The Strike Dual Folding Adapter mounts directly to a 1913 Picatinny interface with two (x2) built-in locking lugs for a secure attachment. For the stock rear piece, included is a rear rubber anti-slip buttpad to create the best possible shoulder weld for rifle or registered Short-Barrel Rifle (SBR) setups. A single QD point is located on the rear of the stabilizer and ambidextrous QD sling mounting points for the stock. The Strike Dual Folding Adapter is constructed with a steel hinge and 6061-T6 Aluminum base, adapter & strut. Get a unique modular system with interchangeable (sold separately) parts like optional cheek riser (to be only used legally with stock setup), strut lengths and other accessories. Use with almost any 1913 Picatinny rear end like the Strike AR Picatinny Stock Adapter or many factory OEM weapons with a Picatinny rail section in place of the traditional AR buffer tube threads. The Strike Dual Folding Adapter is a one of a kind adapter that gives you more options than anything on the market for those who want a truly modular folder that is under 10 ounces. MOUNT COMPATIBILITY: 1913 Picatinny Strike AR Picatinny Stock Adapter TINCK ARMS X-16 with Picatinny Stock Adapter B&T APC9/45, APC223/300, GHM Brownells BRN-180 lower receiver CZ Bren 2 CZ Scorpion EVO pistol w/ SI Stock Adapter Back Plate Galil ACE Ruger PC Charger SIG SAUER MCX/MPX as well as others RUBBER PAD NOTE:-Watch this video: How do the rubber pads work? (click link here)-Included rubber pads in various thicknesses are for the two (x2) indentations located inside the Dual Folding Adapter side that faces the bar. Unfold and insert the desired rubber pad thickness to adjust the desired locking tension when fully deployed. DISCLAIMER:-Always check with your state and local laws. We are not lawyers.-Stabilizer was designed and intended for use as a stabilizing accessory for one-handed firing along with rear QD sling attachment point for one-handed sling tension firing for stability.-Stock was designed and intended for use with a rifle setup or registered Short-Barrel Rifle (SBR) setup. NOTE:-Pressing buttons simultaneously will remove bar from hinge-Lubrication of hinge and button components needed for routine maintenance (See additional compatibility list in PRODUCT SPEC tab)MOUNT COMPATIBILITY: 1913 Picatinny DISCLAIMER:-Dirt and/or sand can hinder folding hinge proper operation-Not recommended for use while mortaring firearm to clear malfunctions-Expect wear and tear on folding locking mechanism from long term use-Be careful, avoid fingers from getting caught during folding and unfolding process WARNING:-Not recommended for use while mortaring firearm to clear malfunctions-Before every use, always check proper function of your QD mount and/or sling loop and any wear and tear from use-Always have your weapon in the SAFE position when not being fired-Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy Note: It is the responsibility of the purchaser to ensure that possession and use of this item is in compliance with all relevant federal, state, and municipal laws or statutes.MONTAGEVIDEOPRODUKTVIDEO

Udskriv

STRIKE INDUSTRIES Picatinny Dual Folding Stock Brace

Earms

Detaljer

Aktualitet

Beskrivelse

Lignende tilbud