LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, billede 1 af 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, billede 2 af 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, billede 3 af 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, billede 4 af 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, billede 5 af 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, billede 6 af 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC

≈ 1.419 kr

Pris hos forhandleren: 189,90 €. Omregnet efter ECB-kursen fra 30. oktober 2026.

8700 Leoben, Østrig

ID: 10088980

Denne vare kan ikke leveres i øjeblikket.

Køb fra et land uden for EU: Våbnet går gennem en importør i dit land, og forhandleren sørger for eksporten. Sådan foregår køb fra Europa

Køb sikkert med Gunfinder

Vores AI-baserede identitetskontrol af sælgerne gør Gunfinder til den sikreste markedsplads på nettet. Læs mere

Om sælgeren

Earms

Forhandler

3.862 tilbud

Detaljer

Originalsprog

Tysk

Kategori

Stand

Placering

🇦🇹 8700 Leoben, Østrig

Tilgængelighed

kan ikke leveres

Aktualitet

Dette tilbud er en kopi, hvor tilbudsdata er blevet overført til os fra en webshop, forhandler eller ekstern markedsplads. Bemærk, at eventuelle forsinkelser i dataoverførslen kan medføre midlertidige prisforskelle.

Kilde: Earms
Senest opdateret: for cirka 17 timer siden

Beskrivelse

Bemærk: Varen befinder sig i udlandet. Bemærk, at leveringsbetingelser, leveringstider og/eller købsproceduren derfor kan være anderledes.

The Lancer Adaptive Magwell (LAM™) is a bolt-on upgrade for all milspec AR-15’s which increases the effective diameter of the magazine well, decreasing reload time and improving reliability under stressful or adverse conditions. LANCER LAM™ Magwell Features: One-piece aluminium construction Designed for milspec AR-15/M4/M16 rifles with standard forged lower receivers with removable trigger guards Compatibility: Works only with AR-15/M4/M16 Forged Lower Receiver manufactured according to Mil-Spec diameter with removable trigger guards Works with most standard AR-15/M4/M16 USGI pattern magazines NOT compatibel with Billet Lower Receiver NOT compatibel with S&W Lower Receiver Specs: Forged Magazine Well Extension, precision machined from 6061-T6 aluminum Finish: Mil-Spec Type III black Includes: Rubber gaskets for a snug rattle-free fit Informations: Compatible Lower Receiver see under this article, accessories INSTALLATION INSTRUCTIONS 1. Remove spring pin (or roll pin) from the front of the trigger guard where it connects the existing magwell. 2. Swing the trigger guard down so that you have approximately 1/2″ of clearance below the magwell. 3. Slide the Lancer Adaptive Magwell (LAM) over the lower lip of the receiver until it stops, making sure that the rubber gasket is properly seated down in the front pocket of the LAM. (NOTE: The one-piece LAM comes with two styles of rubber gasket. You may want to test fit the magwell with both to determine which gasket style will work best for your particular receiver.) 4. Using a small screwdriver or the tip of a dummy round, depress the spring-loaded pin on the LAM and slide it the rest of the way onto the receiver until the spring-pin pops into place in the trigger guard pin hole. 5. Re-install the front of the trigger guard into the mounting location on the LAM. 6. Check to make sure the LAM is secure and perform a basic function test on the rifle prior to live-fire use. MADE IN THE USA

Udskriv

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC

Earms

Detaljer

Aktualitet

Beskrivelse

Lignende tilbud