BCM GUNFIGHTER AR-15 Enhanced Lower Parts Kit FDE, billede 1 af 9

BCM GUNFIGHTER AR-15 Enhanced Lower Parts Kit FDE, billede 2 af 9

BCM GUNFIGHTER AR-15 Enhanced Lower Parts Kit FDE, billede 3 af 9

BCM GUNFIGHTER AR-15 Enhanced Lower Parts Kit FDE, billede 4 af 9

BCM GUNFIGHTER AR-15 Enhanced Lower Parts Kit FDE, billede 5 af 9

BCM GUNFIGHTER AR-15 Enhanced Lower Parts Kit FDE, billede 6 af 9

BCM GUNFIGHTER AR-15 Enhanced Lower Parts Kit FDE, billede 7 af 9

BCM GUNFIGHTER AR-15 Enhanced Lower Parts Kit FDE

≈ 1.389 kr

Pris hos forhandleren: 185,90 €. Omregnet efter ECB-kursen fra 30. oktober 2026.

8700 Leoben, Østrig

ID: 10087134

Denne vare kan ikke leveres i øjeblikket.

Køb fra et land uden for EU: Våbnet går gennem en importør i dit land, og forhandleren sørger for eksporten. Sådan foregår køb fra Europa

Køb sikkert med Gunfinder

Vores AI-baserede identitetskontrol af sælgerne gør Gunfinder til den sikreste markedsplads på nettet. Læs mere

Om sælgeren

Earms

Forhandler

3.862 tilbud

Detaljer

Originalsprog

Tysk

Kategori

Stand

Placering

🇦🇹 8700 Leoben, Østrig

Tilgængelighed

kan ikke leveres

Aktualitet

Dette tilbud er en kopi, hvor tilbudsdata er blevet overført til os fra en webshop, forhandler eller ekstern markedsplads. Bemærk, at eventuelle forsinkelser i dataoverførslen kan medføre midlertidige prisforskelle.

Kilde: Earms
Senest opdateret: for cirka 15 timer siden

Beskrivelse

Bemærk: Varen befinder sig i udlandet. Bemærk, at leveringsbetingelser, leveringstider og/eller købsproceduren derfor kan være anderledes.

BCM® Enhanced Lower Parts Kit for your AR15 Lower ReceiverThis kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include;BCM PNT Trigger AssemblyBCM Pistol Grip, Mod 3BCM Enhanced Trigger GuardIn a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM® parts are made in the USA and to the highest standards. Please look at the information below.BCM PNT Trigger Assembly (Polished Nickel Teflon)BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product..PolishedThe sear engagement surfaces are ground, but then hand polished for an increased smoothness up to 300% beyond the Mil-Spec.NickelAn electroless nickel finish is applied for a smoother trigger pull with less grit and reduced felt creep . Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.TeflonTeflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.Bolt Catch and Safety SelectorThe BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market)The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.BCM Magazine CatchThe BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft.The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.BCM Rear Takedown Pin and Front Pivot PinBCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.BCM Detents and SpringsTakedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.This BCM Enhanced Lower Parts Kit includes:1. BCM PNT Hammer2. Hammer Spring3. BCM PNT Trigger4. Trigger Spring5. Hammer/Trigger Pins6. Disconnector7. Disconnector Spring8. Bolt Catch9. Bolt Catch Plunger10. Bolt Catch Spring11. Bolt Stop Pin12. Rear Pivot Pin13. Buffer Retainer14. Buffer Retainer Spring15. Magazine Catch Button16. Magazine Catch Spring17. Magazine Catch18. Rear Take Down Pin19. Selector (Safety)20. Selector Detent21. Selector Detent Spring22. BCM Enhanced Trigger Guard23. BCM Trigger Guard Pin24. BCM Trigger Guard Screw25. BCM Pistol Grip Mod 3, Grip Screw, Locking Washer26. Take Down/ Pivot Pin Detent27. Take Down/ Pivot Pin Detent SpringAs with all BCM Life Saving Tools , Made in the USA.

Udskriv

BCM GUNFIGHTER AR-15 Enhanced Lower Parts Kit FDE

Earms

Detaljer

Aktualitet

Beskrivelse

Lignende tilbud