MIDWEST INDUSTRIES Enhanced AR15 Drop in Curved Trigger 3.5lb Single Stage w/ Anti Walk Pins

≈ 2.092 kr

Pris hos forhandleren: 279,90 €. Omregnet efter ECB-kursen fra 30. oktober 2026.

8700 Leoben, Østrig

ID: 10085578

Køb fra et land uden for EU: Våbnet går gennem en importør i dit land, og forhandleren sørger for eksporten. Sådan foregår køb fra Europa

Køb sikkert med Gunfinder

Vores AI-baserede identitetskontrol af sælgerne gør Gunfinder til den sikreste markedsplads på nettet. Læs mere

Om sælgeren

Earms

Forhandler

3.862 tilbud

Detaljer

Originalsprog

Tysk

Kategori

Stand

Placering

🇦🇹 8700 Leoben, Østrig

Tilgængelighed

ukendt leveringstid

Aktualitet

Dette tilbud er en kopi, hvor tilbudsdata er blevet overført til os fra en webshop, forhandler eller ekstern markedsplads. Bemærk, at eventuelle forsinkelser i dataoverførslen kan medføre midlertidige prisforskelle.

Kilde: Earms
Senest opdateret: for cirka 14 timer siden

Beskrivelse

Bemærk: Varen befinder sig i udlandet. Bemærk, at leveringsbetingelser, leveringstider og/eller købsproceduren derfor kan være anderledes.

Hochwertiger Drop In Single Stage Abzug mit einem fixem Abzugsgewicht von 1.588g, Anti Walk Pin Kit inkludiert. Technical Specs 3.5lbs / 1.588g Single-stage trigger system Allows you shoot more accurately with less effort Ultra-smooth break with a crisp, clean release Fits small pin size (.154) Quick reset and low overtravel for enhanced speed Interior parts are S7 tool steel with heavy-hit hardening then black nitride finished for enhanced strength and corrosion resistance Lightened trigger pull (3.5-lb. pull weight) Lightened hammer Drop safety feature Self-contained design makes it easy and quick to install with no fine-tuning needed Unit weight: 2.4 oz. CNC machined from high-grade, heat-treated tool steel and aluminum Blue anodized aluminum cassette housing Fits most .308 and .223 AR style platforms Anti-walk pins and screws included. 100% Made in USA Note: The center set screw should not be tampered with. Any attempts to modify the trigger will void the warranty. Instructions NOT FOLLOWING THESE INSTRUCTIONS WILL RESULT IN WARRANTY BEING VOID. MIDWEST INDUSTRIES IS NOT RESPONSIBLE FOR DAMAGE DONE TO FIREARM DURING INSTALLATION. STEP 1Make sure the weapon is clear and there is not a round in the chamber. REPEAT THIS STEP. Remove the upper receiver from the weapon system.STEP 2Loosen the grip screw on the inside of the grip and remove it. It may be a flathead, torx head, or hex head, depending on the manufacturer. Carefully remove the grip to expose the spring inside. There is a detent behind the spring. Both of these are small and easily lost. Remove the spring and detent, using your hand or a plastic bin to catch the detent as it falls. Save them for reinstallation (Step 7).STEP 3With a small brass punch or nonmetallic item (to avoid damage to the finish), press out the hammer pin and remove the hammer and hammer spring.STEP 4Next, press out the trigger pin. This may require pressing down on the disconnector. Remove the disconnector, disconnector spring, trigger, and trigger spring. Now remove the safety selector if it did not come out earlier. The pocket that everything was in should now be clear and empty.STEP 5Drop the Midwest Industries trigger in the pocket using the holes as a reference for direction. The hammer will face the magwell.STEP 6Install Anti-walk pins with included wrench and screws.STEP 7Reinstall the safety selector and the grip assembly with the detent, detent spring, grip, and grip screw to their respective positions in that order.STEP 8There are two small setscrews located on the trigger system under the hammer springs. Lift or shift over each hammer spring and use a 5/64 Allen wrench to snug the setscrews to the floor of the receiver. Do not overtighten, as this will change the poundage of the trigger.DO NOT TIGHTEN OR LOOSEN THE MAIN SETSCREW (LOCATED IN THE CENTER). THIS HAS ANOTHER FUNCTION AND IS NOT TO BE CHANGED BY THE OPERATOR. SEEK A COMPETENT GUNSMITH IF CHANGES NEED TO BE MADE.STEP 9Perform functions check on the weapon to verify correct installation. MADE IN THE USA

Udskriv