Achtung: Din browser er forældet. Bemærk, at dele af Gunfinder derfor ikke vil fungere. Du bør opdatere din browser så snart som muligt. Læs mere her!
Opret annonce

ADAMS ARMS Adjustable Micro Block Piston Kit PISTOL

≈ 3.063 kr
Pris hos forhandleren: 409,90 €. Omregnet efter ECB-kursen fra 30. oktober 2026.
8700 Leoben, Østrig
8
ID: 10084029
Denne vare kan ikke leveres i øjeblikket.
Køb fra et land uden for EU: Våbnet går gennem en importør i dit land, og forhandleren sørger for eksporten. Sådan foregår køb fra Europa
Køb sikkert med Gunfinder
Vores AI-baserede identitetskontrol af sælgerne gør Gunfinder til den sikreste markedsplads på nettet. Læs mere
Om sælgeren
Earms
Forhandler

Detaljer

Originalsprog
Tysk
Kategori
  1. Tilbehør
  2. Reservedele
Stand
Ny
Placering
🇦🇹 8700 Leoben, Østrig
Tilgængelighed
kan ikke leveres

Aktualitet

Dette tilbud er en kopi, hvor tilbudsdata er blevet overført til os fra en webshop, forhandler eller ekstern markedsplads. Bemærk, at eventuelle forsinkelser i dataoverførslen kan medføre midlertidige prisforskelle.
Kilde
Earms
Senest opdateret
for cirka 10 timer siden

Beskrivelse

Bemærk: Varen befinder sig i udlandet. Bemærk, at leveringsbetingelser, leveringstider og/eller købsproceduren derfor kan være anderledes.
Adjustable P Series Micro Piston Conversion Kit for Pistol Lenght DI Gas Systems This system will work with .223 REM/5.56 x 45mm NATO ammunition GEN2, Upper Receiver Bushing and Installation Dowel is no longer needed! AA Gen2 Conversion Kit includes: Patented One-Piece Bolt Carrier, DLC coated .750 P Series Micro Block – Adjustable with 5 Settings – 100%/74%/53%/32%/11% Bolt Spring Drive Rod with Rod Bushing and Rod Spring Gas Block Shim Spacer The Adams Arms Piston System: A short stroke free floating piston system Is Self-Cleaning Carbon and gases are expelled forward, away from operator Corrosive resistant coating processes Harmonics are not transferred into the barrel Doesn’t vent directly to atmospheric pressure; this eliminates flash signature and super sonic crack which is optimal for night vision and suppresses fir To select the correct length kit, use the following measurements: Pistol: 4.846″ from barrel extension to shoulder Carbine: 7.866″ from barrel extension to shoulder Mid: 9.866″ from barrel extension to shoulder Rifle: 13.241″ from barrel extension to shoulder For .300 BLK we only recommend a Pistol Gas Length and a Low Mass Carrier for optimal performance We recommend using a standard barrel nut or barrel nut with similar measurements for proper fit and function of the kit. Many aftermarket proprietary barrel nuts do not offer the clearance for the drive rod or proper seating of the spring and bushing Informations: Our new Piston Kits No Longer Require the Receiver Bushing or the Receiver Installation Dowel Micro Gas Blocks should have the set screws torqued to 55-60 in-lbs Compatible with AR-15 MIL-SPEC Direct Impingement Upper Receivers Compatible with Adams Arms Piston Upper Receivers NOT compatible to AR-10 Upper Receivers MADE IN THE USA
Udskriv