Achtung: Twoja przeglądarka jest przestarzała. Zauważ, że Gunfinder może nie działać w niektórych miejscach. Powinieneś zaktualizować swoją przeglądarkę tak szybko, jak to możliwe. Dowiedz się więcej!
Gunfinder is also available in other languages.
Ogłoszenie
Magazyn Czym jest Gunfinder? Pomoc

SCHAFT TIPPEN BERETTA 424 / 425 / 426 kaliber 12 - Schränkung w prawo / STOCK TYPE BERETTA 424 / 425 / 426 Ga 12 - Cast OFF (praworęczny)

196 €

06061 Castiglione Del Lago, Włochy
13.05.2026
12
ID: 9813910
Kupuj bezpiecznie z Gunfinder
Nasza weryfikacja tożsamości dostawców wspierana przez AI czyni Gunfinder najbezpieczniejszym rynkiem online. Dowiedz się więcej
O sprzedawcy
Effebistore.eu
Handlarz

Szczegóły

Język oryginalny
Niemiecki
Marka
Beretta
Kategoria
Kalibry
.12
Stan
Nowe
Lokalizacja
🇮🇹 06061 Castiglione Del Lago, Włochy
Dostępność
dostępne
Wysyłka następuje
w ramach UE
Koszty wysyłki

€ 11,00

Zmiany
1 zmiana

Opis

Uwaga: Lokalizacja artykułu znajduje się za granicą. Proszę pamiętać, że może to wpłynąć na warunki dostawy, czasy wysyłki i/lub procedurę zakupu.

Oryginalny łoże do strzelby Beretta 424 / 425 / 426 ga 12. Lakierowane i z poduszką przeciwodrzutową z bakelitu. Wykonane z krajowego drewna orzechowego, pierwszej klasy. Dostępny spadek w pięcie wynosi 35/55 mm. Łoże dostępne jest z prawym wygięciem 3,5 mm.

Długość zamontowanego łoża: 36,5 cm

Ponieważ drewno jest materiałem żywym i podlega niewielkim deformacjom spowodowanym wilgocią i wysychaniem, mogą być konieczne drobne regulacje na częściach stykających się z ramą podczas obudowy/montażu.

Czas dostawy tego produktu wynosi zazwyczaj 7/10 dni, chyba że producent poda inaczej.
Wysyłka odbywa się kurierem, dla którego zapewniona jest możliwość śledzenia przesyłki.
Zwroty nieużywanych i nienaruszonych produktów są akceptowane, z prośbą o zgłoszenie w ciągu 3 dni od otrzymania; koszty zwrotu ponosi kupujący.

Original pistol stock for shotgun Beretta 424 / 425 / 426 ga 12. Varnished and including recoil pad in bakelite. Made in national walnut wood, first grade. The available drop at heel is 35/55 mm. The stock is available with right curvature of 3,5 mm.

Lenght mounted stock: 36,5 cm

Since wood is a living material and subject to slight deformations caused by humidity and drying, it is possible that slight adjustments may be necessary on the parts in contact with the action frame during casing/assembly.


Shipping times for this product are generally 7/10 days, unless otherwise communicated by the manufacturer.
The shipment is made by courier for which traceability is provided.
Returns of unused and intact products are accepted, with a request to be made within 3 days of receipt; return shipping is the responsibility of the buyer.

 

 

(Pokaż opis w oryginalnym języku)

Original Pistolenschaft für Schrotflinte Beretta 424 / 425 / 426 ga 12. Lackiert und inklusive Rückstoßpolster aus Bakelit. Hergestellt aus nationalem Walnussholz, erste Klasse. Der verfügbare Fall an der Ferse beträgt 35/55 mm. Der Schaft ist mit einer rechten Krümmung von 3,5 mm erhältlich.

Länge montierter Schaft: 36,5 cm

Da Holz ein lebendiges Material ist und durch Feuchtigkeit und Austrocknung leichten Verformungen unterliegt, kann es vorkommen, dass beim Verkleiden/Montieren an den mit dem Basküle in Kontakt stehenden Teilen leichte Anpassungen erforderlich sind.

Die Lieferzeit für dieses Produkt beträgt normalerweise 7/10 Tage, sofern der Hersteller nichts anderes angibt.
Der Versand erfolgt mit einem Spediteur, dessen Sendungsverfolgung gewährleistet ist.
Die Rücksendung des unbenutzten und unversehrten Produkts wird akzeptiert, mit einer Anfrage innerhalb von 3 Tagen nach Erhalt; der Rückversand geht zu Lasten des Käufers.

Original pistol stock for shotgun Beretta 424 / 425 / 426 ga 12. Varnished and including recoil pad in bakelite. Made in national walnut wood, first grade. The available drop at heel is 35/55 mm. The stock is available with right curvature of 3,5 mm.

Lenght mounted stock: 36,5 cm

Since wood is a living material and subject to slight deformations caused by humidity and drying, it is possible that slight adjustments may be necessary on the parts in contact with the action frame during casing/assembly.


Shipping times for this product are generally 7/10 days, unless otherwise communicated by the manufacturer.
The shipment is made by courier for which traceability is provided.
Returns of unused and intact products are accepted, with a request to be made within 3 days of receipt; return shipping is the responsibility of the buyer.

 

 

Drukuj

Inne oferty od Effebistore.eu

Zobacz oferty
Zobacz oferty

To może Cię również zainteresować

Najlepsze aukcje

Oferty sponsorowane