Achtung: Twoja przeglądarka jest przestarzała. Z tego powodu Gunfinder może nie działać poprawnie w niektórych miejscach. Jak najszybciej zaktualizuj przeglądarkę. Dowiedz się więcej!

Kocham broń i cycki – naklejka

≈ 18 zł
Cena u Dealera: 45 kr. Przeliczono po kursie EBC z 10 listopada 2026.
Dostępne od 18 lat (bez pozwolenia)
254 64 Helsingborg, Szwecja
0
ID: 11623604
Zakup spoza UE: Broń przechodzi przez importera w twoim kraju, a sprzedawca zajmuje się eksportem. Tak przebiega zakup z Europy
Bezpieczne zakupy z Gunfinder
Nasze weryfikowanie tożsamości sprzedawców wspierane przez AI czyni Gunfinder najbezpieczniejszym marketplace'em online. Dowiedz się więcej
O sprzedającym
RangeMaster Store
Sprzedawca

Szczegóły

Język oryginalny
Szwedzki
Stan
Nowe
Lokalizacja
🇸🇪 254 64 Helsingborg, Szwecja
Dostępność
dostępny

Aktualność

Ta oferta pochodzi z synchronizacji danych, podczas której informacje o ofercie zostały przesłane do nas ze sklepu, sprzedawcy lub zewnętrznego marketplace'u. Pamiętaj, że ze względu na możliwe opóźnienia w przesyłaniu danych mogą wystąpić tymczasowe różnice w cenach.
Źródło
RangeMaster Store
Ostatnio sprawdzono u sprzedawcy
około 14 godzin temu

Opis

Uwaga: Przedmiot znajduje się za granicą. Pamiętaj, że warunki dostawy, czas wysyłki i/lub procedura zakupu mogą się różnić.
Description:   
Decals stick to almost all flat surfaces! just peel and stick! 
Size: 13 cm
Application Instructions:
1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker.
2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.
3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape
4. Carefully position the sticker to the desired area. 
5. Rub the sticker from one side to the other, eliminating any air bubbles.
6. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface.
7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
8. Check for air bubbles. In most cases air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible.
Your sticker is now worry free!

Podobne oferty