FX King regulator tuningowy Gen 3 firmy Huma-Air do wysokiego ciśnienia
99 €
Do nabycia bez pozwolenia (od 18 lat)
7665 AN Albergen, Holandia
0
ID: 10817292
Zakup spoza UE: Broń przechodzi przez importera w twoim kraju, a sprzedawca zajmuje się eksportem.
Tak przebiega zakup z Europy
Bezpieczne zakupy z Gunfinder
Nasze weryfikowanie tożsamości sprzedawców wspierane przez AI czyni Gunfinder najbezpieczniejszym marketplace'em online.
Dowiedz się więcej
Szczegóły
- Język oryginalny
- Niderlandzki
- Kategoria
- Stan
- Nowe
- Lokalizacja
- 🇳🇱 7665 AN Albergen, Holandia
- Dostępność
- dostępny w przedsprzedaży
Aktualność
Ta oferta pochodzi z synchronizacji danych, podczas której informacje o ofercie zostały przesłane do nas ze sklepu, sprzedawcy lub zewnętrznego marketplace'u. Pamiętaj, że ze względu na możliwe opóźnienia w przesyłaniu danych mogą wystąpić tymczasowe różnice w cenach.
- Źródło
- Metura Schietsport
- Ostatnia aktualizacja
- około 12 godzin temu
Opis
Uwaga:
Przedmiot znajduje się za granicą. Pamiętaj, że warunki dostawy, czas wysyłki i/lub procedura zakupu mogą się różnić.
The benefits of the Huma-Air, FX King Gen 3 tuning regulator are:
The recovery time in between shots is much faster compared to the factory regulator.
This Huma-Air FX King regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
Equal as the factory reg, if you want to lower the pressure, the rifle needs to be de-pressurized first otherwise the valve can get damaged.
By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
We also supply some extra valves, so in case you adjust the pressure to the wrong side, and you damage the valve, it can be replaced without any extra costs.
When you order your Huma-Air, FX King Gen 3 tuning regulator you will receive:
The Gen III tuning regulator by Huma-Air
The belleville spring set of your choise
A set of spare valve disk
We will include a “Huma-Air regulated” breech sticker
Fitting instructions as pdf download
Huma-Air Quality Control
Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.
Pressure settings of the Huma-Air, FX King Gen 3 tuning regulator
The design of the tuning regulator makes it posible for setting it exactly to your wishes while placed in your FX King by watching the output pressure gauge on you rifle.
We have currently two pressure ranges for the FX Gen3 regulator available:
The extra high pressure range, 100-200 Bar what will suit all calibers within the high power range and for more extreme purposes and very good for the slugs and heavy pellets.
A low pressure range, 60-135 Bar, what will suit the lower power rifles like the sub 12 ft/lbs versions perfectly.
Please note: you need to do the stacking of the belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during shipping.
