Huma-Air BSA Scorpion SE regulator tuningowy
105 €
Do nabycia bez pozwolenia (od 18 lat)
7665 AN Albergen, Holandia
0
ID: 10813185
Zakup spoza UE: Broń przechodzi przez importera w twoim kraju, a sprzedawca zajmuje się eksportem.
Tak przebiega zakup z Europy
Bezpieczne zakupy z Gunfinder
Nasze weryfikowanie tożsamości sprzedawców wspierane przez AI czyni Gunfinder najbezpieczniejszym marketplace'em online.
Dowiedz się więcej
Szczegóły
- Język oryginalny
- Niderlandzki
- Kategoria
- Stan
- Nowe
- Lokalizacja
- 🇳🇱 7665 AN Albergen, Holandia
- Dostępność
- dostępny
Aktualność
Ta oferta pochodzi z synchronizacji danych, podczas której informacje o ofercie zostały przesłane do nas ze sklepu, sprzedawcy lub zewnętrznego marketplace'u. Pamiętaj, że ze względu na możliwe opóźnienia w przesyłaniu danych mogą wystąpić tymczasowe różnice w cenach.
- Źródło
- Metura Schietsport
- Ostatnia aktualizacja
- około 3 godziny temu
Opis
Uwaga:
Przedmiot znajduje się za granicą. Pamiętaj, że warunki dostawy, czas wysyłki i/lub procedura zakupu mogą się różnić.
For the Bsa Scorpion SE models we have designed an unique regulator what replaces the original “body adaptor” part of the rifle. It’s made of Chrome Molybdeen steel what is blued so it has the same finish as the original BSA part. Designed for a wide pressure range (70-150 bar) to suit sub 12 ft/lbs (UK) and high power FAC models.
After the regulator is placed the pressure gauge still indicates the fill pressure of the main pressure tube. It’s very easy to install on your rifle, just depressurize the rifle, unscrew the body adapter en screw the regulator in it’s place and your are finished*The regulator is vented to to the atmosphere without the need of drilling a hole or what so ever. This guaranties very consistent regulating behavior without creeping up in pellet speed during time!
Due to the limited volume of the BSA action construction these regulators are suitable for the low- and high power version in .177 and .22.For the the .25 SE models and the SE 1200 models in high power version we have BSA SE 1200 model available
The benefits
Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
A constant pellet speed over the full working pressure range.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
The regulator housing is made of extremely tough 42Cr steel.
Tested for a working pressure of at least 3x the working pressure of the rifle, for everyone’s safety.
It uses a long stroke piston that gives great consistency.
The regulator body and the housing are one piece, so no chance of the regulator moving inside the cylinder.
DIY fitting is a real option for the most people.
High quality bluing, same colour as the original BSA pressure tube.
Pressure settings
The regulator comes preset on the most common pressure setting according to your choise of barrel and caliber, or we will adjust it according to your personal wishes. The length of the barrel is measured from the magazine until the tip of the actual barrel (not the end of the shroud). After fitting the regulator, always check the powersetting of the rifle and finetune it when needed to stay within legal limits.
Huma-Air Quality Control
The regulator is CNC produced out of high grade materials like 42Cr steel and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
